Operating Instructions



Description of the Screen Displays
(continued)
(See "Network," page 89.)
Streaming
ⓐ
ⓑ
ⓒ
IP Address list
Set the IP Addresses of the Back-End server for
streaming. Up to 5 IP addresses can be registered.
The Front-End application periodically sends
packets to these IP addresses. The Back-End
server recognizes the sender of the received
packets as a streaming target. A Front-End
application can connect with a single Back-End
server at a time.
Alert Streaming
If a check mark is placed in the box, when
streaming is in progress in the Back-End
application, that is displayed on the screen.
Resolution
Set the resolution of the video in streaming.
Setting values:
QCIF (176x112), CIF (352x240)
Recorder (PC LAN)
ⓐ ⓑ ⓒ ⓓ
DHCP
Set if the LAN port on the Memory Card Video
Recorder that is used for connection of the Front-
End application is to operate as a DHCP server or
not.
Setting values:
OFF, Server1, Server2, Server3,
Server4
IP Address
Set the IP address for the LAN port on the Memory
Card Video Recorder that is used for connection of
the Front-End application.
This setting is enabled when DHCP is set to OFF.
Subnet Mask
Set the subnet mask for the LAN port on the
Memory Card Video Recorder that is used for
connection of the Front-End application.
This setting is enabled when DHCP is set to OFF.
Gateway
Set the gateway for the LAN port on the Memory
Card Video Recorder that is used for connection of
the Front-End application.
Network screen
①
②
③
④
Streaming is not available at present. Upgrading
is scheduled for the future.