Datasheet

ManualsBrandsPanasonic ManualsMicroswitchesUltraminiature Micro Switch ASQ1, 100mA, 1CO, 1.5N, Simulated Leaf Lever

–1–

AECTB6E 201701-T

ORDERING INFORMATION

PRODUCT TYPES

■ Terminal type (Mounting hole 3mm standard type/Mounting hole 3mm without boss type/2 boss type/Side pin type)

Long Stroke and Sliding

Contact Construction

Sealed Switches

Turquoise Stroke

Switches

Actuator

Operating

Force OF

(Max.)

Mounting hole 3mm standard type

Mounting hole

3mm without

boss type

Right 2 boss

type

Left 2 boss

type

Right side pin

type

Left side pin

type

Solder

terminal

right angle

terminal

left angle

terminal

PC board

terminal

Solder

terminal

Solder

terminal

Solder

terminal

Solder

terminal

Pin plunger 1.5N ASQ10410 ASQ10710 ASQ10810 ASQ11510 ASQ16410 ASQ17410 ASQ14410 ASQ15410

Leaf lever 1.7N ASQ10417 ASQ10717 ASQ10817 ASQ11517 ASQ16417 ASQ17417 ASQ14417 ASQ15417

Simulated leaf lever 1.5N ASQ10418 ASQ10718 ASQ10818 ASQ11518 ASQ16418 ASQ17418 ASQ14418 ASQ15418

(Unit: mm)

FEATURES

• For pin plunger type, it maintains a

long stroke OT (Over Travel) with

over 2.2 mm on the NO side and over

2.5 mm on the NC side.

• Since contact force does not depend

on the operation stroke, the range of

possible use over the entire stroke is

greatly increased.

• High contact reliability to support

low level switching loads

• Highly effective sealing for

resistance against adverse

environments

• Silent operation with sliding contact

TYPICAL APPLICATIONS

• Automobiles (detection of door

opening and closing and shift lever

position, etc.)

• Household appliances (vacuum

cleaners, air conditioners, washing

machines, etc.)

13.3

10.1

5.4

RoHS compliant

ASQ1

Size of mounting hole

0: Mounting hole 3 mm

standard type

1: Mounting hole 3 mm

without boss type

4: Right side pin type

(solder terminal only)

5: Left side pin type

(solder terminal only)

6: Right 2 boss type

(solder terminal only)

7: Left 2 boss type

(solder terminal only)

Note: Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.

COM

Actuator

0: Pin plunger

7: Leaf lever

8: Simulated

leaf lever

Terminal

2: Wire leads right side type

(SPST-NC and

SPST-NO only)

3: Wire leads left side type

(SPST-NC and

SPST-NO only)

4: Solder

terminal

5: PC board

terminal

6: Wire leads

bottom type

7: PC board right angle

terminal

8: PC board left angle

terminal

Contact form

1: SPDT 2: SPST-NC

(wire lead type only)

3: SPST-NO

(wire lead type only)

Summary of content (12 pages)

PAGE 1
Turquoise Stroke Switches Long Stroke and Sliding Contact Construction Sealed Switches 13.3 5.4 10.1 (Unit: mm) RoHS compliant FEATURES TYPICAL APPLICATIONS • For pin plunger type, it maintains a long stroke OT (Over Travel) with over 2.2 mm on the NO side and over 2.5 mm on the NC side. • Since contact force does not depend on the operation stroke, the range of possible use over the entire stroke is greatly increased.
PAGE 2
Turquoise Stroke Switches (ASQ1) ■ Wire leads bottom type (Mounting hole 3mm standard type) Actuator Operating Force OF (Max.) Pin plunger Leaf lever Simulated leaf lever SPDT ASQ10610 ASQ10617 ASQ10618 1.5N 1.7N 1.5N Wire leads bottom type (Mounting hole 3mm standard type) SPST-NC ASQ10620 ASQ10627 ASQ10628 SPST-NO ASQ10630 ASQ10637 ASQ10638 ■ Wire leads side type (Mounting hole 3mm standard type) Actuator Operating Force OF (Max.) Pin plunger Leaf lever Simulated leaf lever 1.5N 1.7N 1.
PAGE 3
Turquoise Stroke Switches (ASQ1) ■ Protection grade 1) JIS C0920 (water-resistance experiments for electrical machines and protection rating against incursion of solid substances): Immersion protected (Note 1) 2) IEC 60529 (rating for outer shell protection): IP67 (Immersion protected) (Note 1) 3) JIS D0203 (method for testing moisture resistance and water resistance in automotive components): Equivalent of D2 (Note 2) Note 1) A concrete testing method is to check for any adverse effect on the structure af
PAGE 4
Turquoise Stroke Switches (ASQ1) DIMENSIONS (Unit: mm) General tolerance: ±0.25 The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ ■ Terminal type: Mounting hole 3 mm, standard type Pin plunger External dimensions CAD Data Operating Force (max. OF) Free Position (max. FP) FP 9.2 MAX. RP (NC) 8.8±0.3 OP (NC) 8.7±0.3 RP (NO) 8.5±0.3 OP (NO) 8.4±0.3 TTP (5.9) C0.3 8.4±0.2 13.3±0.15 5.4±0.15 5.4 2.7 1.9 dia. 3.0+0.1 –0 5.1 5.9 TTP (10.
PAGE 5
Turquoise Stroke Switches (ASQ1) ■ Terminal type: Simulated leaf lever External dimensions CAD Data Operating Force (max. OF) C 0. 3 2.8 13.3±0.15 R2.0 FP 14.4 MAX. RP (NC) 12.9±0.5 OP (NC) 12.5±0.5 RP (NO) 12.4±0.5 OP (NO) 12.0±0.5 TTP (8.7) Free Position (max. FP) 8.4±0.2 5.4±0.15 3.3 5.4 2.7 1.9dia. °) (18 15.0 R0.5 0.5 R1.2 FP 18.6 MAX. RP (NC) 17.1±0.5 OP (NC) 16.7±0.5 RP (NO) 16.6±0.5 OP (NO) 16.2±0.5 TTP (12.9) 0.2 1.2 3.2±0.1 3.0+0.1 –0 5.1 5.9 3.7 4.2 8.3±0.1 3.0+0.3 –0.2 0.4 1.
PAGE 6
2-3 .0 . 5.1 5.9 3 0. C +0.3 3.0−0.2 3.7 4.2 5.1 5.9 4.53±0.15 CAD Data 1.2 2.0 4.53±0.15 8.3±0.1 1.2 2.0 4.53±0.15 1.5 0.4 TTP (5.9) RP (NC) 8.8±0.3 OP (NC) 8.7±0.3 RP (NO) 8.5±0.3 OP (NO) 8.4±0.3 1.5 0.4 1.2 2.0 3.7 4.2 TTP (5.9) FP 9.2 MAX. +0.3 3.0−0.2 3.7 4.2 8.3±0.1 2.6±0.05 5.1 5.9 TTP (5.9) FP 9.2 MAX. FP 13.4 MAX. RP (NC) 13.0±0.3 OP (NC) 12.9±0.3 RP (NO) 12.7±0.3 OP (NO) 12.6±0.3 TTP (10.1) RP (NC) 8.8±0.3 OP (NC) 8.7±0.3 RP (NO) 8.5±0.3 OP (NO) 8.4±0.3 8.3 1.5 0.
PAGE 7
Turquoise Stroke Switches (ASQ1) ■ Angle terminal type: Mounting hole 3 mm, standard type (Right type) External dimensions CAD Data C 5.08±0.15 2 0. 5.08±0.15 0.9 NO NC C RP (NC) 8.8±0.3 OP (NC) 8.7±0.3 RP (NO) 8.5±0.3 OP (NO) 8.4±0.3 0. 3 COM 13.3±0.15 8.4±0.2 5.4 5.4±0.15 2.7 1.9 dia. 3.7 4.2 6.0±0.3 3.0 −0 5.1 5.9 +0.1 TTP (5.9) FP 9.2 MAX. 3.2±0.1 4.1 2.0 3.95±0.15 0.4 3.0 + − 0 0.1 dia . 8.3±0.1 3.1±0.
PAGE 8
Turquoise Stroke Switches (ASQ1) ■ Wire leads bottom type: Mounting hole 3 mm, standard type External dimensions FP 9.2 MAX. RP (NC) 8.8±0.3 OP (NC) 8.7±0.3 RP (NO) 8.5±0.3 OP (NO) 8.4±0.3 TTP (5.9) CAD Data 8.4±0.2 C 0.3 13.3±0.15 5.4±0.15 5.4 2.7 1.9 dia. 3.2±0.1 3.0+0.1 −0 5.1 5.9 3.7 8.3±0.1 3.0+0 −0.1 dia. 4.3 3.2 R 0.2 4.2 R 0.3 2.2 0.3 2.6 0.3 3.6 1.4 dia. 4.53 4.53 ∗ Wire lead thickness : Wire lead color : : : 5.2 300±10 5.0±2 0.
PAGE 9
Turquoise Stroke Switches (ASQ1) CAUTIONS FOR USE ■ Soldering conditions The application of excessive heat upon the switch when soldering can cause degradation of switch operation. Therefore, be sure to keep within the conditions given below. Manual soldering: use soldering irons (max. 350°C, within 3 seconds at each terminal) capable of temperature adjustment. This is to prevent deterioration due to soldering heat. Care should be taken not to apply force to the terminals during soldering.
PAGE 10
Notes for Turquoise Switches (BJ, BS, BV type) CAUTIONS FOR USE (Common for BJ, BS and BV types) ■ Fastening of the switch body 1) Fasten the switch body onto a smooth surface using the correct screw as shown in the chart below and tighten it with the prescribed torque. The switch case may deform depending on the type of screw (screw head diameter, etc.), the size of the washer, and the use or non-use of a washer. Therefore, please confirm the appropriate torque of actual conditions.
PAGE 11
Notes for Turquoise Switches (BJ, BS, BV type) • Hydrogen sulfide exposure test Test conditions: Concentration: 3 ppm, Temperature: 40°C 104°F, Humidity: 75% RH Contact resistance Contact resistance • Dust protection test Test conditions: The talcum powder used shall be able to pass through a square- meshed sieve the nominal wire diameter of 7 μm. The amount of talcum powder to be used is 2 kg per cubic metre of the test chamber volume. The duration of the test is 8 hours.
PAGE 12