Datasheet

ManualsBrandsPANASONIC ManualsPush Actuated Switches & ButtonsMicroswitch 16 Vdc 50 mA 1 x Off/(On) AS

–1–

AECTB55E 201408-T

ORDERING INFORMATION

PRODUCT TYPES

■ Terminal type (solder terminal)

■ Wire leads type

Long Stroke, Sliding

Contact Construction

Sealed Switches

TURQUOISE STROKE

MINI SWITCHES

Actuator

Right 2 boss type Left 2 boss type

Normally Closed type (NC) Normally Open type (NO) Normally Closed type (NC) Normally Open type (NO)

Pin plunger ASQM16420 ASQM16430 ASQM17420 ASQM17430

Simulated roller lever ASQM16428 ASQM16438 ASQM17428 ASQM17438

Actuator Normally Closed type (NC) Normally Open type (NO)

Pin plunger ASQM11620 ASQM11630

Simulated roller lever ASQM11628 ASQM11638

FEATURES

• Miniaturization achieved with

changing from 1 Form C to 1 Form A

or 1 Form B contacts.

(For the terminal type, volume has

been cut 45% compared to our

previous product.)

• Lever installation possible while it is

small size.

Operation possible by various moving

parts such as metal cams.

• Contact force does not depend on

the operation stroke.

• High contact reliability to support

low level switching loads.

• Highly effective sealing for resis-

tance against adverse environments.

(IP67)

• Silent operation with sliding

contacts.

TYPICAL APPLICATIONS

• Automobiles (detection of door

opening and closing, shift lever

position, etc.)

• Household appliances (vacuum

cleaners, air conditioners, washing

machines, electric power tool, etc.)

5.3

8.3

7.85

Terminal type

Wire leads type

5.3

8.3

13.55

(Unit: mm)

RoHS compliant

New

ASQM1

Mounting

1: Without boss type (wire leads type only)

6: Right 2 boss type (terminal type only)

7: Left 2 boss type (terminal type only)

Note: Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.

Contact form

2: Normally Closed type (NC)

3: Normally Open type (NO)

Actuator

0: Pin plunger

8: Simulated roller lever

Terminal

4: Terminal type (Solder terminal)

6: Wire leads type

Carton: 1,000 pcs.

Carton: 240 pcs.

Summary of content (6 pages)

PAGE 1
Long Stroke, Sliding Contact Construction Sealed Switches New 8.3 (Unit: mm) 5.3 7.85 8.3 5.3 Terminal type 13.55 Wire leads type RoHS compliant TURQUOISE STROKE MINI SWITCHES FEATURES TYPICAL APPLICATIONS • Miniaturization achieved with changing from 1 Form C to 1 Form A or 1 Form B contacts. (For the terminal type, volume has been cut 45% compared to our previous product.) • Lever installation possible while it is small size. Operation possible by various moving parts such as metal cams.
PAGE 2
Turquoise Stroke Mini Switch (ASQM1) SPECIFICATIONS ■ Contact rating 1 mA 5 V DC to 50 mA 16 V DC ■ Operation environment and conditions Item Ambient and storage temperature Allowable operating speed Max. operating cycle rate Specifications –40°C to +85°C (no freezing and condensing) 30 to 500 mm/sec. 120 cpm Note: When switching at low and high speeds or under vibration, or in high-temperature, high-humidity environments, life and performance may be reduced significantly depending on the load capacity.
PAGE 3
Turquoise Stroke Mini Switch (ASQM1) ■ Operating characteristics Characteristics Operating Force (OF) max. Total Travel Force (TF) max. (Reference value) Terminal type Free Position (FP) max. Wire leads type Pin plunge Terminal type Operating Position (OP) Wire leads type Terminal type Release Position (RP) Wire leads type Terminal type Over Travel (OT) min. Wire leads type Terminal type Wire leads type Total Travel Position (TTP) (Reference value) Simulated roller lever 1.2N (3.0N) 7.7mm 14.45mm 1.
PAGE 4
Turquoise Stroke Mini Switch (ASQM1) ■ Terminal type (Solder terminal), Left 2 boss type, Pin plunger External dimensions CAD Data 2.6±0.05 Total Travel Force (TF) max. (Reference value) (3.0N) Free Position (FP) max. 7.7mm dia Total Travel Position (TTP) (Reference value) (5.1mm) 3.2 5.0±0.1 1.8 0.6 Over Travel (OT) min. Initial: 7.1±0.25mm After test: 7.1±0.3mm Initial: 7.15±0.3mm After test: 7.15±0.35mm Initial: 1.75mm After test: 1.70mm 4.0 2.2 . 2.6±0.05 . dia 3.6 TTP (5.1) 3.
PAGE 5
Turquoise Stroke Mini Switch (ASQM1) ■ Wire leads type, Pin plunger External dimensions CAD Data Operating Force (OF) max. 1.2N Total Travel Force (TF) max. (Reference value) (3.0N) Free Position (FP) max. 8.5 5.3±0.15 8.3 14.45mm Initial: 13.75±0.35mm After test: 13.75±0.4mm Initial: 13.8±0.4mm After test: 13.8±0.45mm Initial: 1.65mm After test: 1.60mm Operating Position (OP) 1.9 dia. Over Travel (OT) min. 0.9 TTP (11.75) Total Travel Position (TTP) (Reference value) .0 5 (10.5) 8.3±0.
PAGE 6
Turquoise Stroke Mini Switch (ASQM1) CAUTIONS FOR USE ■ Soldering conditions • The application of excessive heat upon the switch when soldering can cause degradation of switch operation. Therefore, be sure to keep within the conditions given below. • Manual soldering: Use soldering irons (max. 350°C, within 3 seconds) capable of temperature adjustment. This is to prevent deterioration due to soldering heat. Care should be taken not to apply force to the terminals during soldering.