User Manual
Table Of Contents
- Contents
- Before use
- 1. Basic operations
- 1-1. Background transition
- 1-2. Wipe
- 1-3. Key
- 1-4. PinP (picture in picture)
- 1-5. DSK (downstream key)
- 1-6. Key Link
- 1-7. FTB (Fade to Black)
- 1-8. Internal color signals
- 1-9. Switching the AUX output
- 1-10. Memory
- 1-10-1. Memory registration and recall items
- 1-10-2. Storing the settings in the memory (Store)
- 1-10-3. Recalling the operations stored in the memory (Recall)
- 1-10-4. Memory preview
- 1-10-5. Deleting the operations stored in the memory (Delete)
- 1-10-6. Selecting the buses whose settings are to be registered and or played back
- 1-10-7. Registering the material selection items
- 1-10-8. Setting effect dissolve (shot memory)
- 1-10-9. Editing event memory timelines
- 1-10-10. Registering memories (Register)
- 1-11. Video memories
- 1-12. Memory card
- 1-13. Waveform monitor settings
- 1-14. Setting the status display
- 2. Input/output signal settings
- 2-1. Input signal settings
- 2-1-1. Setting the frame synchronizer
- 2-1-2. Setting the input mode
- 2-1-3. Setting the delay amount
- 2-1-4. Freezing the input signals
- 2-1-5. Setting the material names
- 2-1-6. Setting the up-converter
- 2-1-7. Setting the video process function
- 2-1-8. Setting the analog input gain (option)
- 2-1-9. Setting the analog composite input signals (option)
- 2-1-10. Setting the DVI input signals
- 2-1-11. Displaying the DVI input signal information
- 2-1-12. Adjusting the DVI input signals
- 2-1-13. Automatic adjustment of the black level and white level (analog input signals)
- 2-2. Output signal settings
- 2-3. Setting the sync signals
- 2-4. Adjusting the output signal phase
- 2-5. Setting the multi view display
- 2-6. Setting the ancillary data and embedded audio data
- 2-1. Input signal settings
- 3. System settings
- 4. External interfaces
- 5. Setting menu table
- Appendix (glossary)
- Index
124
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Use [F1] to select. Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Time BKGD Parameter TransTime Sec Frame
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999
Default value 1 0
Key Parameter TransTime Sec Frame
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999
Default value 1 0
PinP1 Parameter TransTime Sec Frame
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999
Default value 1 0
PinP2 Parameter TransTime Sec Frame
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999
Default value 1 0
DSK Parameter TransTime Sec Frame
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999
Default value 1 0
AUX1 BUS Trans
Parameter TransTime Sec Frame Transition
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999 Enable, Disable
Default value 1 0 Disable
PinP1 BUS Trans
Parameter TransTime Sec Frame Transition
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999 Enable, Disable
Default value 1 0 Disable
PinP2 BUS Trans
Parameter TransTime Sec Frame Transition
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999 Enable, Disable
Default value 1 0 Disable
Effect Dissolve Parameter TransTime Sec Frame
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999
Default value 1 0
FTB Parameter TransTime Sec Frame
Setting range 0 to 33
(When 59.94 Hz
is selected)
0 to 999
Default value 1 0
Plug-in The plug-in
name of the
plug-in software
registered is
displayed on the
sub menu.
Parameter Open Menu Enable Version Delete
Setting range
Execute
On, Off Display only
Execute
Default value On
5. Setting menu table