User Manual
Table Of Contents
- Contents
- Before use
- 1. Basic operations
- 1-1. Background transition
- 1-2. Wipe
- 1-3. Key
- 1-4. PinP (picture in picture)
- 1-5. DSK (downstream key)
- 1-6. Key Link
- 1-7. FTB (Fade to Black)
- 1-8. Internal color signals
- 1-9. Switching the AUX output
- 1-10. Memory
- 1-10-1. Memory registration and recall items
- 1-10-2. Storing the settings in the memory (Store)
- 1-10-3. Recalling the operations stored in the memory (Recall)
- 1-10-4. Memory preview
- 1-10-5. Deleting the operations stored in the memory (Delete)
- 1-10-6. Selecting the buses whose settings are to be registered and or played back
- 1-10-7. Registering the material selection items
- 1-10-8. Setting effect dissolve (shot memory)
- 1-10-9. Editing event memory timelines
- 1-10-10. Registering memories (Register)
- 1-11. Video memories
- 1-12. Memory card
- 1-13. Waveform monitor settings
- 1-14. Setting the status display
- 2. Input/output signal settings
- 2-1. Input signal settings
- 2-1-1. Setting the frame synchronizer
- 2-1-2. Setting the input mode
- 2-1-3. Setting the delay amount
- 2-1-4. Freezing the input signals
- 2-1-5. Setting the material names
- 2-1-6. Setting the up-converter
- 2-1-7. Setting the video process function
- 2-1-8. Setting the analog input gain (option)
- 2-1-9. Setting the analog composite input signals (option)
- 2-1-10. Setting the DVI input signals
- 2-1-11. Displaying the DVI input signal information
- 2-1-12. Adjusting the DVI input signals
- 2-1-13. Automatic adjustment of the black level and white level (analog input signals)
- 2-2. Output signal settings
- 2-3. Setting the sync signals
- 2-4. Adjusting the output signal phase
- 2-5. Setting the multi view display
- 2-6. Setting the ancillary data and embedded audio data
- 2-1. Input signal settings
- 3. System settings
- 4. External interfaces
- 5. Setting menu table
- Appendix (glossary)
- Index
125
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Use [F1] to select. Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Video Memory
Video Memory1
Parameter Select Rec Play Stop
Setting range Still1, Still2,
Clip1, Clip2
Execute Execute Execute
Default value Still1
Video Memory2
Parameter LEAD LAST
Setting range
Execute Execute
Default value
Video Memory3
Parameter Total Time Current time Key Rec Lock
Setting range The setting range differs from one
format to another.
1080/59.94i: 00s01f to 20s00f
1080/50i: 00s01f to 24s00f
1080/24PsF: 00s01f to 25s00f
1080/23.98PsF: 00s01f to 25s00f
720/59.94p: 00s01f to 10s00f
720/50p: 00s01f to 12s00f
480/59.94i: 00s01f to 20s00f
576/50i: 00s01f to 24s00f
On, Off On, Off
Default value 00s01f 00s01f Off On
Rec1 Parameter Preview V Source Key Enable Review
Setting range On, Off AUX1 to 4 On, Off On, Off
Default value Off AUX1 On On
Rec2 Parameter Loop Quality Limit (s) Limit (f)
Setting range On, Off High, Standard 0 to 20
(When 59.94i is
selected)
0 to 600
Default value Off Standard 20 0
Clip1 Play Mode
Parameter Mode
Reverse
Variable
Freeze
Setting range Lead, Last,
Loop
On, Off ×1, ×2, ×4,
×8, ×1/2,
×1/4, ×1/8
Frame, Field
Default value Last Off ×1 Frame
Clip2 Play Mode
Parameter Mode
Reverse
Variable
Freeze
Setting range Lead, Last,
Loop
On, Off ×1, ×2, ×4,
×8, ×1/2,
×1/4, ×1/8
Frame, Field
Default value Last Off ×1 Frame
Trans Sync
Parameter Clip1 Clip2
Setting range Off, KEY ON,
PinP1 ON,
PinP2 ON,
DSK ON,
FTB ON
Off, KEY ON,
PinP1 ON,
PinP2 ON,
DSK ON,
FTB ON
Default value Off Off
Memory
Parameter Mode Select Save
Setting range Auto, Manual Still1, Still2,
Clip1, Clip2, All
Execute
Default value Auto All
5. Setting menu table
: This function can be actuated in any model whose system version is V2.00.00 and up.
The functions are not displayed on the menus with a model whose system version is under V2.00.00.