User Manual
Table Of Contents
- Contents
- Before use
- 1. Basic operations
- 1-1. Background transition
- 1-2. Wipe
- 1-3. Key
- 1-4. PinP (picture in picture)
- 1-5. DSK (downstream key)
- 1-6. Key Link
- 1-7. FTB (Fade to Black)
- 1-8. Internal color signals
- 1-9. Switching the AUX output
- 1-10. Memory
- 1-10-1. Memory registration and recall items
- 1-10-2. Storing the settings in the memory (Store)
- 1-10-3. Recalling the operations stored in the memory (Recall)
- 1-10-4. Memory preview
- 1-10-5. Deleting the operations stored in the memory (Delete)
- 1-10-6. Selecting the buses whose settings are to be registered and or played back
- 1-10-7. Registering the material selection items
- 1-10-8. Setting effect dissolve (shot memory)
- 1-10-9. Editing event memory timelines
- 1-10-10. Registering memories (Register)
- 1-11. Video memories
- 1-12. Memory card
- 1-13. Waveform monitor settings
- 1-14. Setting the status display
- 2. Input/output signal settings
- 2-1. Input signal settings
- 2-1-1. Setting the frame synchronizer
- 2-1-2. Setting the input mode
- 2-1-3. Setting the delay amount
- 2-1-4. Freezing the input signals
- 2-1-5. Setting the material names
- 2-1-6. Setting the up-converter
- 2-1-7. Setting the video process function
- 2-1-8. Setting the analog input gain (option)
- 2-1-9. Setting the analog composite input signals (option)
- 2-1-10. Setting the DVI input signals
- 2-1-11. Displaying the DVI input signal information
- 2-1-12. Adjusting the DVI input signals
- 2-1-13. Automatic adjustment of the black level and white level (analog input signals)
- 2-2. Output signal settings
- 2-3. Setting the sync signals
- 2-4. Adjusting the output signal phase
- 2-5. Setting the multi view display
- 2-6. Setting the ancillary data and embedded audio data
- 2-1. Input signal settings
- 3. System settings
- 4. External interfaces
- 5. Setting menu table
- Appendix (glossary)
- Index
129
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Use [F1] to select. Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Multi View Display MV Split Parameter Split
Setting range 4Split,
5-aSplit,
5-bSplit,
6-aSplit,
6-bSplit,
9Split,
10-aSplit,
10-bSplit,
16Split
Default value 10-aSplit
MV Pattern 1/4
Parameter Pos1Signal Pos2Signal Pos3Signal Pos4Signal
Setting range SDI IN1 to 8, DVI IN, IN-A1, IN-A2, IN-B1, IN-B2, CBGD1, CBGD2,
Still1V, Still1K, Still2V, Still2K, Clip1V, Clip1K, Clip2V, Clip2K, PGM,
PVW, MEM-PVW, Key Out, AUX1 to 4, Clock
Default value PGM PVW SDI IN1 SDI IN2
MV Pattern 2/4
Parameter Pos5Signal Pos6Signal Pos7Signal Pos8Signal
Setting range
The setting range is the same as for the MV Pattern 1/4 sub menu.
Default value SDI IN3 SDI IN4 SDI IN5 SDI IN6
MV Pattern 3/4
Parameter Pos9Signal Pos10Signal Pos11Signal Pos12Signal
Setting range
The setting range is the same as for the MV Pattern 1/4 sub menu.
Default value SDI IN7 SDI IN8 DVI IN Still1V
MV Pattern 4/4
Parameter Pos13Signal Pos14Signal Pos15Signal Pos16Signal
Setting range
The setting range is the same as for the MV Pattern 1/4 sub menu.
Default value Still2V Clip1V Clip2V AUX1
MV Frame Parameter Frame Character Label Tally
Setting range LUM0%,
LUM25%,
LUM50%,
LUM75%,
LUM100%,
Off
LUM0%,
LUM25%,
LUM50%,
LUM75%,
LUM100%,
Off
On, Off Red,
Red+Green,
Off
Default value LUM75% LUM75% On Red+Green
Display Parameter Level Meter Input Status Marker Marker Size
Setting range On, Off On, Off 4:3, 16:9, Off 80 to 100%
Default value Off On Off 95%
5. Setting menu table