User Manual
Table Of Contents
- Contents
- Before use
- 1. Basic operations
- 1-1. Background transition
- 1-2. Wipe
- 1-3. Key
- 1-4. PinP (picture in picture)
- 1-5. DSK (downstream key)
- 1-6. Key Link
- 1-7. FTB (Fade to Black)
- 1-8. Internal color signals
- 1-9. Switching the AUX output
- 1-10. Memory
- 1-10-1. Memory registration and recall items
- 1-10-2. Storing the settings in the memory (Store)
- 1-10-3. Recalling the operations stored in the memory (Recall)
- 1-10-4. Memory preview
- 1-10-5. Deleting the operations stored in the memory (Delete)
- 1-10-6. Selecting the buses whose settings are to be registered and or played back
- 1-10-7. Registering the material selection items
- 1-10-8. Setting effect dissolve (shot memory)
- 1-10-9. Editing event memory timelines
- 1-10-10. Registering memories (Register)
- 1-11. Video memories
- 1-12. Memory card
- 1-13. Waveform monitor settings
- 1-14. Setting the status display
- 2. Input/output signal settings
- 2-1. Input signal settings
- 2-1-1. Setting the frame synchronizer
- 2-1-2. Setting the input mode
- 2-1-3. Setting the delay amount
- 2-1-4. Freezing the input signals
- 2-1-5. Setting the material names
- 2-1-6. Setting the up-converter
- 2-1-7. Setting the video process function
- 2-1-8. Setting the analog input gain (option)
- 2-1-9. Setting the analog composite input signals (option)
- 2-1-10. Setting the DVI input signals
- 2-1-11. Displaying the DVI input signal information
- 2-1-12. Adjusting the DVI input signals
- 2-1-13. Automatic adjustment of the black level and white level (analog input signals)
- 2-2. Output signal settings
- 2-3. Setting the sync signals
- 2-4. Adjusting the output signal phase
- 2-5. Setting the multi view display
- 2-6. Setting the ancillary data and embedded audio data
- 2-1. Input signal settings
- 3. System settings
- 4. External interfaces
- 5. Setting menu table
- Appendix (glossary)
- Index
132
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Use [F1] to select. Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Input (Composite)
/ X ()
IN A1, IN A2, IN B1
or IN B2 is displayed
in the X part.
The material name
(up to 10 characters)
is displayed in the
part.
FS Parameter FS Mode
Setting range On, Off Dot by Dot,
Up Convert
(Enabled when
the system
format is set to
1080/59.94i,
1080/24PsF,
1080/23.98PsF
and 720/59.94p.)
Default value On Up Convert
Freeze Parameter Select Freeze
Setting range Frame, Field On, Off
Default value Frame Off
Name Parameter Type Name
Setting range Default, User
Default value Default
Up Converter1 Parameter Scale Move Detect Sharp Size
Setting range Squeeze,
Edge Crop,
Letter Box
1 to 5 1 to 5 100 to 110
Default value Squeeze 3 3 100
Up Converter2 Parameter Edge Crop Pos Limiter
Setting range Center, Right,
Left
Off, 108, 104,
100
Default value Center Off
Video Process Parameter Gain Chroma Ped Hue
Setting range 30 to 30 8 to 7 100 to 100 30 to 30
(Enabled when
the system
format is set to
1080/59.94i,
720/59.94p and
480/59.94i.)
Default value 0 0 0 0
5. Setting menu table