Datasheet

ManualsBrandsPanasonic ManualsAutomationInterlock Switch, 2NO, IP40, Screw Terminal

–1–

AECTB20E 201701-T

ORDERING INFORMATION

PRODUCT TYPES

Door Interlock Switches

Compliant with

EN Standard

AV1 (GW)

Switches

Type

Part number

Mounting method Button guard Contact form Contact gap

Screw mounting Without button guard

1 Form A Min. 6 mm AV16653F

1 Form B Min. 3 mm AV15653F

1 Form A 1 Form B Max. 3 mm AV14653F

2 Form A Min. 6 mm AV13653F

Snap-in mounting

Without button guard

2 Form A Min. 8 mm AV12753F

3 Form A Min. 8 mm AV11753F

With button guard

2 Form A Min. 8 mm AV12853F

3 Form A Min. 8 mm AV11853F

FEATURES

• 8mm or more is assured as insulation distance between

contacts (Snap-in mounting 2 Form A and 3 Form A type)

• Insulation distance between open contacts is more than 8

mm, as for the 3 Form A type, the combination of power

supply circuit and low voltage circuit is possible.

• Constructed with easy-to-connect terminals .250 Quick-

Connect

TYPICAL APPLICATIONS

• Ofﬁce equipment (Copiers, Facsimiles, Projectors)

• Home appliance (Microwave ovens, Refrigerators)

RoHS compliant

AV 1 5 3 F

Contact form

1: 3 Form A (contact gap: 8 mm)

2: 2 Form A (contact gap: 8 mm)

3: 2 Form A (contact gap: 6 mm)

4: 1 Form A 1 Form B

5: 1 Form B

6: 1 Form A

Mounting method

6: Screw mounting (10.1 A)

7: Snap-in mounting type (10.1 A)

8: Snap-in mounting type

with button guard (10.1 A)

Safety standard

3: ENEC/VDE (EN standard)

F: Cadmium free

Note: Not every combination is available. Please refer to the following table “PRODUCT TYPES”.

Summary of content (13 pages)

PAGE 1
Door Interlock Switches Compliant with EN Standard AV1 (GW) Switches FEATURES • 8mm or more is assured as insulation distance between contacts (Snap-in mounting 2 Form A and 3 Form A type) • Insulation distance between open contacts is more than 8 mm, as for the 3 Form A type, the combination of power supply circuit and low voltage circuit is possible. • Constructed with easy-to-connect terminals .
PAGE 2
AV1 (GW) Interlock Switches CONSTRUCTION ■ Screw mounting 1 Form A 1 Form B type ■ Snap-in mounting 3 Form A type Pushbutton Button guard Double safety structure • Double spring • Double cut-off type Dual spring Insulating cover Coil spring Movable contact Contact shoe NC terminal Stationary contact Dual spring Distance between open contacts: 8 mm or more Between terminal No. 1 to No. 3 and No. 2 to No. 4 NO.1 8 mm or more contact gap (4 mm or more on one side) × 2 = 8 mm or more NO.
PAGE 3
AV1 (GW) Interlock Switches ■ Operating characteristics 1) Screw mounting type Contact arrangement Operating Force (OF) Max. Total operating Force (TF) Max. Pushbutton position: 10mm Free Position (FP) Max. 6.4N 16.6 mm 7.4N 15.3 mm 7.4N 15.3 mm 7.4N 15.3 mm 9.8N 16.6 mm Total operating Force (TF) Max. Pushbutton position: 10mm Free Position (FP) Max. 9.8N 14 mm 14.7N 14 mm (NO contact to ON) 4.9N (NC contact to OFF) 2.9N (NO contact to ON) 5.9N (NC contact to OFF) 2.
PAGE 4
AV1 (GW) Interlock Switches 2 Form A type External dimensions CAD Data 22±0.1 (OT) 8 dia. 13±0.2 10 spherical radius 2-4.3±0.05 dia. hole (FP) (OP) (TTP) 6 21.7 24.8 36 10.6 10.6 .250 Quickconnect terminal 5.8 11.8±0.8 7.6 27±0.8 10.2 30 12.6 Contact gap 2 Form A: Min. 6mm ■ Snap-in mounting type 2 Form A type External dimensions CAD Data 2 Form A type without button guard 2 Form A type with button guard 17.4 17.4 39.9 14 39.9 18 (FP) (TTP) (OP) 2.1 20.9 (FP) (TTP) (OP) 2.
PAGE 5
AV1 (GW) Interlock Switches 3 Form A type External dimensions CAD Data 3 Form A type without button guard 3 Form A type with button guard 18 18 51 51 14 18 8 dia. 6 8 dia. (FP) (TTP) (OP) 20.9 (FP) (TTP) (OP) 2.1 2.1 50 33.3 8 50 33.3 8 47.8 47.8 7.6 6.35 0.8 15.2±0.8 30.4±0.8 .250 Quickconnect terminal 7.6 7.6 0.8 15.2 10.6 0.8 45.6±0.8 30.4±0.8 13.8 Tolerance: ±0.1 14.8 6.35 0.8 ±0.8 .250 Quickconnect terminal 7.6 0.8 0.8 45.6±0.8 10.6 13.8 14.
PAGE 6
Technical Terminology & Cautions for Use (Detection Switches) TECHNICAL TERMINOLOGY ■ Detection Switches A compact switch equipped with an enclosed micro-gap snapaction contact mechanism that makes a specified motion with a specified force to open/close a circuit, and an actuator outside the enclosure (hereinafter referred to as the switch) ■ Actuator A part of the switch that transmits the received external force to an internal spring mechanism to move the movable contact so that the switch can be opened a
PAGE 7
Technical Terminology & Cautions for Use OPERATING CHARACTERISTIC ■ Definition of operating characteristic The main terminological illustrations and meanings which are used with snapaction switches are as follows. Classification RF OF PT TF Force TT FP OT Symbol Unit Varying display method Operating Force OF N Max. Release Force RF N Min. Totaltravel Force TF N Pretravel PT mm, degree Max. Overtravel OT mm, degree Min. Movement Differential MD mm, degree Max.
PAGE 8
Technical Terminology & Cautions for Use TECHNICAL NOTES ON ELECTRICAL CHARACTERISTICS 1) The snap-action switch is designed for AC operations. While it has small contact gaps and no arc absorber, it may be used for low-capacity DC operations. Please refer to the rating of each products 2) For applications with very small switching voltage or current, choose the low-level load type (Au contact).
PAGE 9
Technical Terminology & Cautions for Use MOUNTING STATE AND ENVIRONMENT ■ Checking the insulation distance After mounting and wiring, check the insulation distance between terminals and the ground. If the insulation distance is inadequate, mount insulating material between as required. ■ Fastening the snap-action switch body See the Section “CAUTIONS FOR USE” for the individual switch.
PAGE 10
Technical Terminology & Cautions for Use ■ Usage, storage, and transport conditions (except turquoise switches) During usage, storage, or transportation, avoid locations subject to direct sunlight and maintain normal temperature, humidity, and pressure conditions. The allowable specifications for environments suitable for usage, storage, and transportation are given below. 1) Temperature: The allowable temperature range differs for each switch, so refer to the switch’s individual specifications.
PAGE 11
Technical Terminology & Cautions for Use ■ Types of actuators Shape Pretravel (PT) Overtravel (OT) Operating Force (OF) Vibration Shock Pin plunger Small Small Large Outstanding Appropriate for linear short-stroke action. Pin plunger acts directly on snap action mechanism, enabling high-precision positioning. Amount of movement after operation is smallest among all of the actuators, however, so reliable stopper is required.
PAGE 12
PAGE 13