User's Manual
Table Of Contents
- Before use
- Basic shooting operations
- How to turn the power on and off
- Priority mode (Priority Mode)
- Selecting the units
- Selecting the shooting modes (scene files)
- Shooting
- What to do when encountering problems in the basic shooting operations
- More advanced operations
- Manual shooting
- Preset memories
- White balance adjustment
- Black level (master pedestal) adjustment
- Basic operations
- Camera menu items
- Setting the camera menu items
- Top Menu screen
- Camera screen (when Full Auto is selected)
- Camera screen (when Manual1 to 3 is selected)
- Contrast 1/2 screen
- Contrast 2/2 screen
- Picture 1/3 screen
- Picture 2/3 screen
- Picture 3/3 screen
- 16-axis color matrix
- System screen
- Output screen
- Others 1/4 screen
- Others 2/4 screen
- Others 3/4 screen
- Others 4/4 screen
- Maintenance screen
- Firmware Version screen
- IP Network screen
- Camera menu item table
- Displaying the web screen
- Web screen operations
- Web screen configurations
- Recording to and playing back from a memory card
- Web camera functions
- Displaying the web screen using a mobile terminal
- Limiters
- Activation
- Troubleshooting
- Index
115
Web camera functions
(continued)
Audio input mixer [Audio Input Mixer
Properties]
Enable/Disable (Mute) [Enable]
The audio input signal from the device connected to the
audio input connector can be turned off or on in the same
way as “Audio” of the camera menus and Web settings.
Setting value: 0 (Off), 1 (On)
Volume
Set the microphone input, line input, and volume in the
same way as with “Input Volume” of camera menus and
Web settings.
Setting range: 0 to 1535
● The relationship to “Input Volume” of the camera menus
and Web settings is as follows.
1535 to 1280 Mic High
1279 to 1024 Mic Middle
1023 to 768 Mic Low
767 to 512 Line High
511 to 256 Line Middle
255 to 0 Line Low
● The volume may be adjusted automatically
depending on the communication software
used. Audio may not be stable depending on
the combination of the unit and communication
software.
● Video and audio may not be stable depending on
the performance of your personal computer or other
device. In this case, reduce the resolution and frame
rate of the video or input the audio not from the unit
but from the personal computer or other device.
Notes
● In USB priority mode, H.264 image transmission
cannot be performed for IP video.
● When the device is connected by USB, the IP video
JPEG(1) setting is forcefully changed to 320
×180/5fps.
Notes