User's Manual
Table Of Contents
- Before use
- Basic shooting operations
- How to turn the power on and off
- Priority mode (Priority Mode)
- Selecting the units
- Selecting the shooting modes (scene files)
- Shooting
- What to do when encountering problems in the basic shooting operations
- More advanced operations
- Manual shooting
- Preset memories
- White balance adjustment
- Black level (master pedestal) adjustment
- Basic operations
- Camera menu items
- Setting the camera menu items
- Top Menu screen
- Camera screen (when Full Auto is selected)
- Camera screen (when Manual1 to 3 is selected)
- Contrast 1/2 screen
- Contrast 2/2 screen
- Picture 1/3 screen
- Picture 2/3 screen
- Picture 3/3 screen
- 16-axis color matrix
- System screen
- Output screen
- Others 1/4 screen
- Others 2/4 screen
- Others 3/4 screen
- Others 4/4 screen
- Maintenance screen
- Firmware Version screen
- IP Network screen
- Camera menu item table
- Displaying the web screen
- Web screen operations
- Web screen configurations
- Recording to and playing back from a memory card
- Web camera functions
- Displaying the web screen using a mobile terminal
- Limiters
- Activation
- Troubleshooting
- Index
23
Camera menu operation Wireless remote control
Controller
AW-RP50 AW-RP120 AK-HRP200
Exiting the camera menu
operations
Press the [MENU] button for
2 seconds.
Press the [CAMERA OSD] button for
2 seconds.
Press and hold the [CHARA/MENU]
button for about 2 seconds.
● Perform the menu operations and exit from the menus using the controller which displayed the Top Menu.
If a menu operation has been performed or a menu has been exited using another controller, first display the Top Menu
and exit from it using one controller, and then display the Top Menu and exit from it using the other controller.
● The unit uses a different method to operate its menus from the one employed by the convertible cameras and HD
integrated cameras which have already been launched onto the market.
For details, refer to the Operating Instructions of the camera concerned.
● The response speed of the camera differs slightly depending on the controller used.
Notes
● Some functions may be limited for the following existing controllers.
Item AW-RP555 AW-RP655
Camera OSD menu operation Supported Supported
Scene
Supported *
1
(1/2/3/USER)
Supported
(HALOGEN/FLUORESCENT/OUTDOOR/USER)
Iris Mode Supported Supported
Shutter Mode
Supported with some restrictions *
2
(Step only)
Not supported
Gain Supported *
1
Supported with some restrictions *
3
ND Filter Not supported Not supported
Day/Night Supported with some restrictions *
4
Supported with some restrictions *
4
White Balance Mode
Supported *
1
(AWB A/AWB B/ATW only)
Supported
(AWB A/AWB B/ATW only)
AWB/ABB Supported Supported
Color Temperature Not supported Not supported
R Gain / B Gain Not supported Supported
Pedestal Not supported Supported
R Pedestal / B Pedestal Not supported Supported with some restrictions *
5
Detail Not supported Not supported
V Detail Level Not supported Not supported
CAM/BAR Supported *
1
Supported
Pan Supported Supported
Tilt Supported Supported
Preset Supported Supported
Preset Speed Not supported Not supported
Preset Speed Table Not supported Not supported
Preset Scope Not supported Not supported
Freeze During Preset Not supported Not supported
Focus Mode Supported with some restrictions *
4
Supported with some restrictions *
4
Zoom Supported Supported
Digital Extender Not supported Not supported
OIS Not supported Not supported
Tally Supported Supported
*
1
If the setting value is changed on another device, it may take some time for the setting value to be applied.
*
2
If the Shutter Mode is not turned off/on after configuration, the value will not be changed.
*
3
Improper operation will occur when Gain is set to 19 dB or higher.
*
4
If the setting value is changed on another device, the setting value will not be applied.
(If the value is configured locally on the device, the value will be applied.)
*
5
The value range display will be incorrect (–150 to +150).
Basic operations
(continued)