User's Manual
Table Of Contents
- Before use
- Basic shooting operations
- How to turn the power on and off
- Priority mode (Priority Mode)
- Selecting the units
- Selecting the shooting modes (scene files)
- Shooting
- What to do when encountering problems in the basic shooting operations
- More advanced operations
- Manual shooting
- Preset memories
- White balance adjustment
- Black level (master pedestal) adjustment
- Basic operations
- Camera menu items
- Setting the camera menu items
- Top Menu screen
- Camera screen (when Full Auto is selected)
- Camera screen (when Manual1 to 3 is selected)
- Contrast 1/2 screen
- Contrast 2/2 screen
- Picture 1/3 screen
- Picture 2/3 screen
- Picture 3/3 screen
- 16-axis color matrix
- System screen
- Output screen
- Others 1/4 screen
- Others 2/4 screen
- Others 3/4 screen
- Others 4/4 screen
- Maintenance screen
- Firmware Version screen
- IP Network screen
- Camera menu item table
- Displaying the web screen
- Web screen operations
- Web screen configurations
- Recording to and playing back from a memory card
- Web camera functions
- Displaying the web screen using a mobile terminal
- Limiters
- Activation
- Troubleshooting
- Index
72
Web screen configurations
(continued)
List of settings for transmission output of IP video
Settings H.264(1) H.264(2)*
1
H.264(3)*
1
H.264(4)*
2
JPEG(1)/JPEG(2)/JPEG(3)
Resolution 1920×1080 1920×1080*
2
1280×720*
1
1280×720 1280×720 1280×720 1280×720*
1
640×360*
3
640×360 640×360 640×360 640×360
320×180 320×180 320×180 320×180*
1
Frame rate
System frequency
59.94 Hz
60fps
30fps 30fps 30fps 30fps 30fps
15fps 15fps 15fps 15fps 15fps
5fps 5fps 5fps 5fps 5fps
System frequency
50 Hz
50fps
25fps 25fps 25fps 25fps 25fps
12.5fps 12.5fps 12.5fps 12.5fps 12.5fps
5fps 5fps 5fps 5fps 5fps
*
1
: Settable when HDR is “Off”.
*
2
: Settable when HDR is set to “Off” and the frame rate is other than 60fps (or 50fps).
*
3
: Not settable when HDR is “Off”.
Restrictions of IP streaming
Each bit rate value varies depending on the JPEG(1) to (3) and H.264(1) to (4) settings.
If the bit rate total exceeds the bit rate shown below, configuration and transmission may not be possible.
If configuration of JPEG(1) to (3) and H.264(1) to (4) settings is not possible, check the bit rate total and then configure the
settings again.
Bit rate check Maximum bit rate “Internet mode (over HTTP)” setting (page 69)
Total of JPEG(1) to (3) Approx. 66 Mbps —
Total of JPEG(1) to (3) and H.264(1) to (4) Approx. 66 Mbps On
● JPEG
Image capture size
Refresh interval
Bit rate
System frequency
59.94 Hz
System frequency
50 Hz
1920×1080
30fps 25fps Approx. 59 Mbps
15fps 12.5fps Approx. 30 Mbps
5fps 5fps Approx. 10 Mbps
1280×720
30fps 25fps Approx. 44 Mbps
15fps 12.5fps Approx. 22 Mbps
5fps 5fps Approx. 8 Mbps
640×360
30fps 25fps Approx. 15 Mbps
15fps 12.5fps Approx. 8 Mbps
5fps 5fps Approx. 3 Mbps
320×180
30fps 25fps Approx. 7 Mbps
15fps 12.5fps Approx. 4 Mbps
5fps 5fps Approx. 2 Mbps
● The bit rate values are when “Fine” is selected for “Image quality” (page 69). When “Normal” is selected, the image bit rate
becomes lower than when “Fine”.
● The bit rate values above are the maximum values.
For normal images, the values will become approximately 1/2 to 1/4.