User's Manual
Table Of Contents
- Before use
- Basic shooting operations
- How to turn the power on and off
- Priority mode (Priority Mode)
- Selecting the units
- Selecting the shooting modes (scene files)
- Shooting
- What to do when encountering problems in the basic shooting operations
- More advanced operations
- Manual shooting
- Preset memories
- White balance adjustment
- Black level (master pedestal) adjustment
- Basic operations
- Camera menu items
- Setting the camera menu items
- Top Menu screen
- Camera screen (when Full Auto is selected)
- Camera screen (when Manual1 to 3 is selected)
- Contrast 1/2 screen
- Contrast 2/2 screen
- Picture 1/3 screen
- Picture 2/3 screen
- Picture 3/3 screen
- 16-axis color matrix
- System screen
- Output screen
- Others 1/4 screen
- Others 2/4 screen
- Others 3/4 screen
- Others 4/4 screen
- Maintenance screen
- Firmware Version screen
- IP Network screen
- Camera menu item table
- Displaying the web screen
- Web screen operations
- Web screen configurations
- Recording to and playing back from a memory card
- Web camera functions
- Displaying the web screen using a mobile terminal
- Limiters
- Activation
- Troubleshooting
- Index
87
Web screen configurations
(continued)
User management screen [User mng.]
The users and personal computers (IP addresses) that
can access the unit from personal computers and mobile
terminals are registered in the User mng. screen [User mng.].
User authentication screen [User auth.]
Click the [User auth.] tab of User mng. screen [User mng.].
Configure the user authorization settings for the personal
computers and mobile terminals that can access the unit.
User auth.
User authorization is set to “Off” or “On” here.
Enter the setting using the [Set] button.
Factory settings: Off
Authentication
Specify the method of user authentication to use.
Setting value:
Basic Use basic authentication.
Digest Use digest authentication.
Factory settings: Basic
● If you change the Authentication setting, close the
browser and perform access again.
● When [User auth.] is set to [On], network connection
with the AW-RP50 will be disabled.
● When [User auth.] is set to [On] while
[Authentication] is set to [Digest], network
connection with the AW-RP50, AW-RP120, and
AK-HRP200 will be disabled.
Notes
User name [1 to 32 half-size characters]
The user name is input here.
Enter the setting using the [Set] button.
● For details of usable characters, refer to page 66.
Password
Retype password [4 to 32 half-size characters]
The password is input here.
Enter the setting using the [Set] button.
Access level
Select one of the following settings as the user access
level.
Enter the setting using the [Set] button.
Setting value:
1. Administrator This access level allows the user to
perform all the unit’s operations.
2. Camera control This access level allows only Live screen
operations to be performed.
Factory settings: 2. Camera control
User check
A pull-down menu can be opened here, and the registered
users checked.
A registered user is indicated in the form of “Registered
user name [Access level]”. (Example: admin[1])
To delete a registered user, select the user to be deleted,
and click the [Delete] button on the right.
Up to 9 users can be registered as users.