User's Manual
Table Of Contents
- Before use
- Basic shooting operations
- How to turn the power on and off
- Priority mode (Priority Mode)
- Selecting the units
- Selecting the shooting modes (scene files)
- Shooting
- What to do when encountering problems in the basic shooting operations
- More advanced operations
- Manual shooting
- Preset memories
- White balance adjustment
- Black level (master pedestal) adjustment
- Basic operations
- Camera menu items
- Setting the camera menu items
- Top Menu screen
- Camera screen (when Full Auto is selected)
- Camera screen (when Manual1 to 3 is selected)
- Contrast 1/2 screen
- Contrast 2/2 screen
- Picture 1/3 screen
- Picture 2/3 screen
- Picture 3/3 screen
- 16-axis color matrix
- System screen
- Output screen
- Others 1/4 screen
- Others 2/4 screen
- Others 3/4 screen
- Others 4/4 screen
- Maintenance screen
- Firmware Version screen
- IP Network screen
- Camera menu item table
- Displaying the web screen
- Web screen operations
- Web screen configurations
- Recording to and playing back from a memory card
- Web camera functions
- Displaying the web screen using a mobile terminal
- Limiters
- Activation
- Troubleshooting
- Index
91
Web screen configurations
(continued)
HTTP max segment size(MSS)
Select whether to limit the maximum segment size (MSS)
transmitted by a camera when viewing camera images
using HTTP.
Setting value:
Unlimited(1460byte) Unlimited (1460 byte)
Limited(1280byte) Limited (1280 byte)
Limited(1024byte) Limited (1024 byte)
Factory settings: Unlimited(1460byte)
Normally, it is recommended that the default setting be
used.
Select [Limited(1024byte)] / [Limited(1280byte)] when the
maximum segment size (MSS) of the used communication
line is limited. For details on the maximum segment size
(MSS) of communication lines, consult your network
administrator.
Bandwidth control (bitrate)
Select the amount of data to be distributed.
Setting value:
Unlimited, 1024kbps, 2048kbps, 4096kbps, 8192kbps,
16384kbps, 32768kbps
Factory settings: Unlimited
Easy IP Setup accommodate period
Select “20min” or “Unlimited” as the time for enabling the
operation of the network settings from the Easy IP Setup
Software.
Setting value:
20min The setting operations from the Easy IP Setup
Software are enabled for 20 minutes after the
camera has started operating.
Unlimited The setting operations from the Easy IP Setup
Software are enabled at all times.
Factory settings: 20min
Recommended network setting for internet
Perform the recommended settings to connect the camera
to the Internet.
Clicking the [Set] button displays a dialog box telling the
user that item settings will be changed. After confirming
this, click the [OK] button.
• [JPEG/H.264] tab of camera screen [Image/Audio]
JPEG(1)
Image capture size: 640×360
JPEG(2)
When HDR is “Off”
Image capture size: 320×180
When HDR is “Low” or “High”
JPEG transmission: Off
JPEG(3)
JPEG transmission: Off
H.264(1)
When HDR is “Off”
Internet mode (over HTTP): On
Image capture size: 1280×720
Max bit rate (per client): Max 8192 kbps, Min 2048 kbps
Transmission priority: Best effort
When HDR is “Low” or “High”
Internet mode (over HTTP): On
Image capture size: 640×360
Max bit rate (per client): Max 4096 kbps, Min 1024 kbps
Transmission priority: Best effort
H.264(2)
When HDR is “Off”
Internet mode (over HTTP): On
Image capture size: 640×360
Max bit rate (per client): Max 4096 kbps, Min 1024 kbps
Transmission priority: Best effort
When HDR is “Low” or “High”
H.264 transmission: Off
H.264(3)
When HDR is “Off”
Internet mode (over HTTP): On
Image capture size: 320×180
Max bit rate (per client): Max 4096 kbps, Min 512 kbps
Transmission priority: Best effort
When HDR is “Low” or “High”
H.264 transmission: Off
H.264(4)
H.264 transmission: Off
• “Network” tab in the Network setting screen
Common IPv6/v4
Max RTP packet size: Limited(1280byte)
HTTP max segment size (MSS): Limited(1280byte)