Manual

Installation
<When the AW-E655 camera is used>
® Attach the positioning screw O (supplied) to the camera
mounting spacer ©.
@ Use the 2 screws © (supplied) to attach the camera
mounting spacer © to the fan mounting seat O on the
top panel of the camera.
@ Attach the camera mount © to the camera mounting
spacer © using the 2 screws ©, flat washers o and
spring washers © (supplied).
(Make sure that the two sides of the camera mount are
lower than the central area that is attached.)
@ Attach the lens to the camera.
Remove the lens hood and zoom lever.
<When the AK-HC910 camera is used>
® Attach the 1 positioning screw © (supplied) to the
camera mount ©.
@ Attach the camera mount © to the fan mounting part O
on the top panel of the camera using the 1 screw O, flat
washer © and spring washer © (supplied).
(The camera mount points toward the front or back in
the opposite way from a convertible camera. For pointing
upward or downward, make sure that the two sides of
the camera mount are lower than the central area that is
attached.)
@ Attach the lens to the camera.
Remove the lens hood and zoom lever.
The camera mount in the opposite direction from when the AW-E750 or AW-E860 is used as the camera.
To ensure that none of the screws are loose, use a tool to tighten them up securely.
18(E)