User's Manual
Table Of Contents
- Read this first! (For AW‑UE100WP, AW‑UE100KP)
- Read this first! (For AW‑UE100WPC, AW‑UE100KPC)
- Read this first! (For AW‑UE100WE, AW‑UE100KE, AW‑UE100WED, AW‑UE100KED)
- Read this first! (For AW‑UE100WE, AW‑UE100KE)
- Read this first!
- Before use
- Features
- Accessories
- Optional accessories
- Operating precautions
- Wireless remote control (optional accessory)
- Parts and their functions
- Setting the remote control IDs
- Network settings
- Basic shooting operations
- How to turn the power on and off
- Selecting the units
- Selecting the shooting modes (scene files)
- Shooting
- What to do when encountering problems in the basic shooting operations
- More advanced operations
- Manual shooting
- Preset memories
- White balance adjustment
- Black balance adjustment
- Black level (master pedestal) adjustment
- Genlock adjustment
- Basic setup operations
- Camera menu items
- Setting the camera menu items
- Top Menu screen
- Camera screen
- Brightness 1/2 screen
- Brightness 2/2 screen
- Picture 1/6 screen
- Color TEMP. Setting screen
- Picture 2/6 screen
- Picture 3/6 screen
- Picture 4/6 screen
- Picture 5/6 screen
- Picture 6/6 screen
- Matrix 1/5 screen
- Matrix 2/5 screen
- Matrix 3/5 screen
- Matrix 4/5 screen
- Matrix 5/5 screen
- Lens screen
- System 1/2 screen
- System 2/2 screen
- Output 1/5 screen
- Output 2/5 screen
- Output 3/5 screen
- Output 4/5 screen
- Output 5/5 screen
- UHD Crop 1/2 screen
- UHD Crop 2/2 screen
- Pan/Tilt 1/2 screen
- Pan/Tilt 2/2 screen
- P/T Acceleration screen
- Preset 1/2 screen
- Preset 2/2 screen
- Preset Acceleration screen
- Maintenance screen
- Firmware Version 1/2 screen
- Firmware Version 2/2 screen
- IP Network screen
- Initialize screen
- Hour Meter screen
- HDMI Status screen
- Error Status screen
- Camera menu item table
- Displaying the web screen
- Web screen operations
- Web screen configurations
- Displaying the web screen using a personal computer equipped with a touch panel
- Displaying the web screen using a mobile terminal
- Limiters
- Setting/releasing the limiters
- Safe mode
- Troubleshooting
- Specifications
- Index
Max bit rate(per client)
[512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, 3072kbps,
4096kbps, 6144kbps, 8192kbps, 10240kbps, 12288kbps,
14336kbps, 16384kbps, 20480kbps, 24576kbps]
Specify the NDI|HX bit rate per client.
Factory settings: 10240kbps
<NOTE>
• The NDI|HX bit rate setting range depends on the resolution.
Image quality
This cannot be configured on [NDI|HX stream] screen.
Transmission type
The same as H.264 Transmission type (→ page 114).
Unicast port(Image)
The same as H.264 Unicast port(Image) (→ page 115).
Unicast port(Audio)
The same as H.264 Unicast port(Audio) (→ page 115).
Multicast address
The same as H.264 Multicast address (→ page 115).
Multicast port
The same as H.264 Multicast port (→ page 115).
Multicast TTL/HOPLimit
The same as H.264 Multicast TTL/HOPLimit (→ page 115).
<NOTE>
• When [IP(UDP)] of [Tracking Data Output] is set to [On], video
transmission via IP may be delayed or the video may suffer frame
loss. (→ page 136)
We recommend [IP(UDP)] of [Tracking Data Output] is set to [Off] in
the NDI|HX mode.
• When the authentication feature is enabled, the unit may not be
connected in NDI|HX mode.
In the NDI|HX mode, set [User auth.] (→ page 139) and [Host
auth.] (→ page 140) to [Off].
• In NDI|HX mode, [IP Out1] and [IP Out2] in the [UHD Crop] screen
will have a linked operation.
z High bandwidth NDI
Make NDI transmission settings.
The setting is confirmed with the [Set] button.
High bandwidth NDI
Format
Displays the resolution of NDI images.
<NOTE>
• For the resolution set to Format, confirm the output conditions for
each video format (→ page 20).
Source name
Set the device name displayed when this unit is detected by software
applications and hardware compatible with NDI.
Factory settings: NDI Device [serial number of this unit]
Protocol [TCP, UDP]
Sets the format of unicast transmission to be used.
Factory settings: TCP
Multicast Transmit [On, Off]
Sets whether to perform multicast transmission of images for the
software applications and hardware compatible with NDI.
Factory settings: Off
Address(IPv4)
[IPv4 : 244.0.0.0 to 239.255.255.255]
Enter the multicast IP address.
Images and audio will be sent to the specified IP address.
Factory settings: 239.192.0.30
<NOTE>
• Verify usable multicast IP addresses before entering this setting.
118 119
Web screen configurations (continued)