User's Manual
Table Of Contents
- Read this first! (For AW‑UE100WP, AW‑UE100KP)
- Read this first! (For AW‑UE100WPC, AW‑UE100KPC)
- Read this first! (For AW‑UE100WE, AW‑UE100KE, AW‑UE100WED, AW‑UE100KED)
- Read this first! (For AW‑UE100WE, AW‑UE100KE)
- Read this first!
- Before use
- Features
- Accessories
- Optional accessories
- Operating precautions
- Wireless remote control (optional accessory)
- Parts and their functions
- Setting the remote control IDs
- Network settings
- Basic shooting operations
- How to turn the power on and off
- Selecting the units
- Selecting the shooting modes (scene files)
- Shooting
- What to do when encountering problems in the basic shooting operations
- More advanced operations
- Manual shooting
- Preset memories
- White balance adjustment
- Black balance adjustment
- Black level (master pedestal) adjustment
- Genlock adjustment
- Basic setup operations
- Camera menu items
- Setting the camera menu items
- Top Menu screen
- Camera screen
- Brightness 1/2 screen
- Brightness 2/2 screen
- Picture 1/6 screen
- Color TEMP. Setting screen
- Picture 2/6 screen
- Picture 3/6 screen
- Picture 4/6 screen
- Picture 5/6 screen
- Picture 6/6 screen
- Matrix 1/5 screen
- Matrix 2/5 screen
- Matrix 3/5 screen
- Matrix 4/5 screen
- Matrix 5/5 screen
- Lens screen
- System 1/2 screen
- System 2/2 screen
- Output 1/5 screen
- Output 2/5 screen
- Output 3/5 screen
- Output 4/5 screen
- Output 5/5 screen
- UHD Crop 1/2 screen
- UHD Crop 2/2 screen
- Pan/Tilt 1/2 screen
- Pan/Tilt 2/2 screen
- P/T Acceleration screen
- Preset 1/2 screen
- Preset 2/2 screen
- Preset Acceleration screen
- Maintenance screen
- Firmware Version 1/2 screen
- Firmware Version 2/2 screen
- IP Network screen
- Initialize screen
- Hour Meter screen
- HDMI Status screen
- Error Status screen
- Camera menu item table
- Displaying the web screen
- Web screen operations
- Web screen configurations
- Displaying the web screen using a personal computer equipped with a touch panel
- Displaying the web screen using a mobile terminal
- Limiters
- Setting/releasing the limiters
- Safe mode
- Troubleshooting
- Specifications
- Index
Picture 6/6 screen
Picture 6/6
Knee Mode Auto
Auto Knee Response 4
Knee Point 93.0%
Knee Slope 99
White Clip On
White Clip Level 109%
DNR Low
Return
Knee Mode [Off, Auto, Manual]
Set the operating mode for gradation compression (knee).
Off Turn the knee function off.
Auto Enable the knee function, and set the knee point and knee
slope automatically.
Manual Enable the knee function, and set the knee point and knee
slope manually.
Auto Knee Response [1 to 8]
Set the speed of the auto knee response.
The response speed increases the lower the setting value.
Knee Point [70.0% to 107.0%]
Set the compression level (knee point) position for high-brightness
video signals.
This is only enabled when [Knee Mode] is set to [Manual].
Knee Slope [0 to 99]
Set the knee slope.
This is only enabled when [Knee Mode] is set to [Manual].
<NOTE>
• When [DRS] is enabled, the knee setting is disabled.
White Clip [Off, On]
Turn the white clip function off/on.
White Clip Level [90% to 109%]
Set the white clip level.
This is only enabled when [White Clip] is set to [On].
<NOTE>
• When [Knee Mode] is set to [Auto] and the value of [White Clip
Level] is changed, the knee value will also change.
DNR [Off, Low, High]
Set the digital noise reduction level for outputting bright, clear images
without noise, even at night and low-light conditions.
When [Low] or [High] is selected, noise can be eliminated.
However, image lag may increase.
Return
Return to the previous menu level.
Matrix 1/5 screen
Matrix 1/5
Matrix Type Normal
Adaptive Matrix Off
Return
Matrix Type [Normal, EBU, NTSC, User]
Select the type of color matrix.
Normal
This item is used to load the preset color matrix data and
compensate for the saturation and color phase.
EBU
NTSC
User On the [Matrix 2/5] screen, the [Linear Matrix] value can be
adjusted by the user.
On the [Matrix 3/5] screen, [Matrix 4/5] screen or [Matrix
5/5] screen, the [Color Correction] value can be adjusted
by the user.
Adaptive Matrix [Off, On]
Set Off/On the function that suppresses the linear matrix to suit the
shooting conditions.
Return
Return to the previous menu level.
56
Camera menu items (continued)