User's Manual
Table Of Contents
- Before use
- Basic shooting operations
- How to turn the power on and off
- Priority mode (Priority Mode)
- Selecting the units
- Selecting the shooting modes (scene files)
- Shooting
- What to do when encountering problems in the basic shooting operations
- More advanced operations
- Manual shooting
- Preset memories
- White balance adjustment
- Black level (master pedestal) adjustment
- Basic operations
- Camera menu items
- Setting the camera menu items
- Top Menu screen
- Camera screen (when Full Auto is selected)
- Camera screen (when Manual1 to 3 is selected)
- Contrast 1/2 screen
- Contrast 2/2 screen
- Picture 1/3 screen
- Picture 2/3 screen
- Picture 3/3 screen
- 16-axis color matrix
- System screen
- Genlock screen
- Output screen
- Others 1/4 screen
- Others 2/4 screen
- Others 3/4 screen
- Others 4/4 screen
- Maintenance screen
- Firmware Version screen
- IP Network screen
- Camera menu item table
- Displaying the web screen
- Web screen operations
- Web screen configurations
- Recording to and playing back from a memory card
- Web camera functions
- Displaying the web screen using a mobile terminal
- Limiters
- Activation
- Troubleshooting
- Index
45
Camera menu items
(continued)
■Output screen
### Output ###
Format
HDMI 1080/59.94i
SDI 1080/59.94i
Frequency 59.94Hz
Priority Mode IP
Return
Format
HDMI, SDI
Format
Setting value
Frequency:
59.94Hz
Frequency:
50Hz
HDMI
Auto
2160/29.97p
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
Auto
2160/25p
1080/50p
1080/50i
1080/25PsF
1080/25p
720/50p
SDI
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
1080/50p
1080/50i
1080/25PsF
1080/25p
720/50p
The video format is changed on this screen.
The formats of the images which can be output differ
between “HDMI” and “SDI”.
For details on how to change the format, refer to
“Changing the format” (page 47).
● The video signal of the SDI output may stop
temporarily when the HDMI cable is disconnected and
connected or the connected monitor is replaced, for
example.
Note
Simultaneous output according to video
format
[When the Priority Mode is set to a setting other
than “HDMI(4K)”]
● Signals of the same video format are output from the
HDMI and SDI OUT connectors. (The setting values
in the menu will also change to match the format
configured later.)
● When “HDMI” is set to “Auto”, the unit automatically
determines the output video resolution based on
information from the connected device. This will result
in the “SDI” setting changing to match the video
format of “HDMI”.
[When the Priority Mode is set to “HDMI(4K)”]
● When “HDMI” is set to “2160/29.97p” or “2160/25p”,
you can change the “SDI” setting.
● When the Priority Mode is set to “HDMI(4K)”,
the image sensor operates in “29.97p” or “25p”
mode. Therefore, even when the “HDMI” or “SDI”
video format is set to “59.94p” or “50p”, an image
generated from “29.97p” or “25p” is output.
Frequency [59.94Hz, 50Hz]
This item is selected to switch the frame frequency.
● When the frequency is switched, “Format” is set as
follows.
59.94Hz 50Hz
2160/29.97p
2160/25p
1080/59.94p
1080/50p
1080/59.94i
1080/50i
1080/29.97PsF
1080/25PsF
1080/29.97p
1080/25p
720/59.94p
720/50p
● For details on how to change the frequency, see
“Changing the frequency” (page 47).
● If you change the frequency, the unit will restart
automatically. Operation will not be possible while
the unit is restarting.
Some peripheral devices may not recognize that the
unit has restarted. If you change the frequency, be
sure to restart all peripheral devices.
Note