User's Manual

64
Web screen operations
(continued)
Live screen [Live] : Multi display mode
In this mode, the images of a multiple number of cameras can be monitored on one screen (called the ‘multi screen’).
The image of 4 cameras or max. 16 cameras can be monitored at one time.
When the camera title of any of the images is clicked, the live screen [Live] (single display mode) of the camera concerned is
displayed as a separate window.
In order to use the multi screen, the cameras whose images are to be shown on the multi screen must be set ahead of time.
With one group consisting of 4 cameras, up to four groups of cameras (a total of 16 cameras) can be registered. (page 90)
Multi screen consisting of 4 sub‑screens Multi screen consisting of 16 sub‑screens
1
1. Multi‑Screen list box [Multi‑screen]
The live screen [Live] display method is selected here.
[Single]
The IP videos of the connected camera
are displayed.
[4Split 1/4 Group]
You can view multiple IP videos on
a single screen by configuring the
cameras for multi-screen display
beforehand in the Multi screen setup
screen [Multi-screen] (page 90). (Multi
display mode)
[4Split 2/4 Group]
[4Split 3/4 Group]
[4Split 4/4 Group]
[16Split]
● The IP videos displayed on the multi screen are
JPEG images only.
● IP images are in JPEG format only and audio is not
output.
● Images are stretched vertically to fit the [4:3] aspect
ratio of the multi screens.
● It is not possible to transfer from the live screen
[Live] to the multi screen if the unit’s power has
been turned off, or the network cable has been
disconnected, while IP videos are being displayed.
Notes