User's Manual

97
Web screen configurations
(continued)
 Advanced network setting tab
[Advanced]
Click the [Advanced] tab in the network setup screen
[Network].
Settings relating to the FTP, NTP, UPnP, and HTTPS
functions are performed here.
Click the links to each item to move to the respective setting
page.
z FTP
Configure settings related to the FTP server.
This item’s setting is reflected when the [Set] button is
pressed.
● CGI control from an external device is required to
use the FTP function.
● To use the FTP function, set the priority mode to
“SD card” or “SD card(4K)”. For details, refer to
“Priority mode tab [Priority mode]” (page 67).
● When data is being transferred to an FTP server,
recording to and playback from an SD card are
not possible. Also, the Play List screen cannot be
displayed.
Notes
FTP server address
Enter the IP address or host name of the FTP server to
which image data is to be sent.
Maximum number of
characters
0 to 128 half-size characters
Characters that can be
entered
Half-size alphanumeric characters,
half-size symbols
:. _ -
Factory settings: blank
● To enter the host name of [FTP server address],
you need to configure the [DNS] settings on the
[Network] tab of the network setup screen [Network].
(page 94)
Note
Directory name
Enter the name of the directory to save the video data to
be sent.
Maximum number of
characters
0 to 256 half-size characters
Characters that can be
entered
Half-size alphanumeric characters,
half-size symbols
However, the following characters
cannot be entered.
" & :
Factory settings: blank
User name
Enter the user name (login name) for accessing the FTP
server.
Maximum number of
characters
0 to 32 half-size characters
Characters that can be
entered
Half-size alphanumeric characters,
half-size symbols
However, the following characters
cannot be entered.
" & : ; ¥
Factory settings: blank
Password
Enter the password for accessing the FTP server.
Maximum number of
characters
0 to 32 half-size characters
Characters that can be
entered
Half-size alphanumeric characters,
half-size symbols
However, the following characters
cannot be entered.
" &
Factory settings: blank
● When you enter a password and click the [Set]
button, nothing is displayed in the input field but the
setting is complete.
Note
Control port
Enter the port number for FTP server control.
Port Nos. that can be selected: 1 to 65535
The following port numbers are used by the unit so they
cannot be used.
20, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162,
443, 554, 995, 10669, 10670, 59000 to 61000
Factory settings: 21
FTP mode
Select the FTP communication mode from Passive mode
and Active mode.
Factory settings: Active