Blu-ray Player User Manual

ManualsBrandsPanasonic ManualsBlu-ray PlayerBDP-440

 BDP-LX55

Achieving better video and sound quality

When connecting one TV (or projector) and AV amplifier

to the player, connect in such a way that the video and

audio signals are transferred separately in order to

achieve higher quality video and sound.

Caution

• Make sure to connect a TV to HDMI OUT (MAIN)

terminal, video signals cannot be output from HDMI

OUT (SUB) terminal.

• Make sure to set HDMI Mode to Separate (page 41).

• If the AV amplifier connected to the HDMI OUT (SUB)

terminal is also connected to a TV, the TV’s input may

switch automatically. If this happens, turn off the

control function with HDMI on the TV.

 BDP-440/BDP-140

Match the

direction of the

plug to the

terminal and

insert straight.

BDP-LX55’s rear panel

HDMI cable

(commercially available)

AV receiver

or amplifier

AV receiver

or amplifier

AV receiver

or amplifier

AV receiver

or amplifier

Direction of signal flow

To HDMI input

terminal

HDMI cable

(commercially

available)

From HDMI output

terminal to HDMI input

terminal

BDP-LX55’s rear panel

Match the

direction of the

plug to the

terminal and

insert straight.

HDMI cable

(commercially available)

AV receiver

or amplifier

To HDMI input

terminal

Direction of signal flow

BDP-440’s rear panel

To HDMI

input terminal

From HDMI

output

terminal

AV receiver

or amplifier

To HDMI input

terminal

HDMI cable

(commercially

available)

Match the direction

of the plug to the

terminal and insert

straight.

Direction of signal flow

HDMI cable

(commercially

available)

BDP-140_VXCN5_IBD_EN.book Page 19 Wednesday, September 28, 2011 9:52 AM