user manual

Connections & Settings
11
VQT3V91
STEP 2 : Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
≥ Set “Digital Audio Output” (> 29).
≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV
OUT, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only
be up to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is
also required to connect the amplifier/receiver and TV using an optical digital cable.
You can enjoy richer sound by using the HDMI AV OUT SUB terminal.
≥ Set “HDMI(SUB) Output Mode” to “V.OFF”. (> 28)
– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.
≥ It is possible to playback 3D videos and 3D still pictures when the connected TV is 3D compatible,
even if the amplifier/receiver is not 3D compatible.
≥ The HDMI connection using HDMI AV OUT MAIN supports VIERA Link “HDAVI Control” (> 24).
The HDMI AV OUT SUB terminal is not compatible with the VIERA Link “HDAVI Control”.
HDMI AV OUT MAIN
HDMI AV OUT SUB
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
Amplifier/receiver
HDMI cable HDMI cable
HDMI IN HDMI IN
Amplifier/receiver
HDMI cable
HDMI cable
Connections & Settings
DMP-BDT500_VQT3V91_eng.book 11 ページ ２０１２年２月１４日 火曜日 午後１時９分