user manual

30
VQT3V91
∫ 7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically
expanded and played back at 7.1ch.
≥ If “Off” is selected, sound is played over the
original number of channels. (Note that in the
case of 6.1ch audio, playback will be at 5.1ch.)
≥ Audio reformatting is enabled in the following
cases:
– When you have selected “PCM” in “Digital
Audio Output”.
– When the audio is Dolby Digital, Dolby Digital
Plus, Dolby TrueHD or LPCM.
– BD-Video playback
∫ High Clarity Sound
When connected to TV via the HDMI terminal for
outputting image, it produces clearer sound.
≥ Select “Enable” to use “High Clarity Sound” or
“High Clarity Sound Plus” in the Option menu.
(> 27)
∫ Audio Delay
Synchronization between picture and sound is
corrected by adjusting the delay time of the audio
output.
∫ Analog Audio Output
You can set the optimum multi-channel surround
sound for your speakers from this unit when the
settings cannot be adjusted from a connected
amplifier/receiver with AUDIO OUT terminals.
Select “2ch (Downmix) + 5.1ch” or “7.1ch” and
then set the following options.
– Speaker presence and size
()
– Delay time ( )
– Channel balance ( )
To finish the speaker setting
Select “Complete”.
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
∫ 3D AVCHD Output
Select the output method of 3D AVCHD videos.
∫ 3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when
“Checker board” or “Side by side” is selected.
∫ 3D Playback Precautions
Set to display or hide the 3D viewing warning
screen when playing back the 3D compatible
video software.
∫ Manual Settings (> 27)
∫ Pop-Out Level (> 27)
∫ Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of
each disc will be selected.
≥ Enter a code (> 38) when you select “Other
¢¢¢¢”.
∫ Subtitle Language
Choose the language for the subtitle.
≥ If “Auto” is selected and the language selected
for “Audio Language” is not available, subtitles
of that language will automatically appear if
available on that disc.
≥ Enter a code (> 38) when you select “Other
¢¢¢¢”.
∫ Menu Language
Choose the language for the disc menus.
≥ Enter a code (> 38) when you select “Other
¢¢¢¢”.
∫ Subtitle Text
Select a suitable item according to the language
used for DivX [For_Canada]
or MKV subtitles text.
≥ This item is displayed only after playing back a file.
∫ On-screen Language
Choose the language for menus and on-screen
messages.
3D
L
LS
R
SW
RS
LB RB
C
ms
0.0
dB
0.0
Language
DMP-BDT500_VQT3V91_eng.book 30 ページ ２０１２年２月１４日 火曜日 午後１時９分