Operating Instructions LCD Video Monitor Model No. Model No. Model No. Model No. BT-L2150P/BT-L2150E BT-L2150P BT-L2150E BT-L1500P BT-L1500E BT-L1500P/BT-L1500E DEUTSCH Für Erlauterungen in Deutsch, konsultieren Sie bitte die mitgelieferte CD-ROM. FRANÇAIS Pour des explications en français, veuillez vous reporter au CD-ROM fourni. ITALIANO Per le istruzioni in italiano, vedere il CD-ROM in dotazione. ESPAÑOL Para la explicación en español, consulte el CD-ROM uministrado.
Read this first ! (for BT-L2150P/1500P) WARNING: Always keep the tilt stand screws and protective panel screws out of the reach of infants and small children. CAUTION: The mains plug of the power supply cord shall remain readily operable. The AC receptacle (mains socket outlet) shall be installed near the equipment and shall be easily accessible. To completely disconnect this equipment from the AC mains, disconnect the power cord plug from the AC receptacle.
Read this first ! (for BT-L2150P/1500P) (continued) FCC NOTICE (USA) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation CAUTION: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules.
Read this first ! (for BT-L2150E/1500E) WARNING: CAUTION: This equipment must be earthed. To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power point which is effectively earthed through normal household wiring. Extension cords used with the equipment must have three cores and be correctly wired to provide connection to the earth. Wrongly wired extension cords are a major cause of fatalities.
Read this first ! (for BT-L2150E/1500E) (continued) Caution for AC Mains Lead FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and the other one is only for U.K. Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable. FOR CONTINENTAL EUROPE, ETC. Not to be used in the U.K. FOR U.K. ONLY FOR U.K.
Read this first ! (for BT-L2150E/1500E) (continued) EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1. Applicable standards and operating environment The apparatus is compliant with: • standards EN55103-1 and EN55103-2 2009, and • electromagnetic environments E1, E2, E3 and E4. 2.
About this manual • The BT-L2150P/2150E and the BT-L1500P/1500E is referred to as “the unit” in this manual. • The images and diagrams used in this manual are for reference purposes and may differ from the actual product and displays. • HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • Adobe® Reader® is a trademark of Adobe Systems Incorporated.
Contents Read this first ! (for BT-L2150P/1500P) . . . . . . . . . . 2 Read this first ! (for BT-L2150E/1500E) . . . . . . . . . . 4 Transportation precautions . . . . . . . . . . . . . . . . . . . 6 About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Precautions for Use . . . . . . . . . . . . . . . . . . . . . . . . . 7 Standard accessories . . . . . . . . . . . . . . . . . . . . . . . . 8 About PDF manuals . . . . . . . . . . . . . . . . . . . . . . . . .
Outline Designed especially for use in professional broadcasting, the BT-L2150P/2150E and the BT-L1500P/1500E come with a 54.6 cm (21.5-inch) and 39.1 cm (15.4-inch) wide LCD screen, respectively. ■ High performance panel These monitors achieve outstanding color reproduction, a wide viewing angle, and high-speed response. ■ Multi-format image compatibility • The monitors are equipped with SDI (HD/SD compatible), VIDEO, YPBPR, HDMI (HDCP compatible), PC input terminals.
Dimensions 26.5 (1-1/16) ■ BT-L2150P/BT-L2150E Unit: mm (inches) 265.5 (10-7/16) 70 (2-3/4) 43 (1-11/16) 100 (3-15/16) 100 (3-15/16) 426 (16-3/4) 205.5 (8-1/16) 374 (14-3/4) 538 (21-3/16) 213.5 (8-3/8) 81 (3-3/16) 240 (9-7/16) ■ BT-L1500P/BT-L1500E Unit: mm (inches) 132.5 (5-3/16) 265.5 (10-7/16) 70 (2-3/4) 43 (1-11/16) 308.5 (12-1/8) 207 (8-1/8) 81 (3-3/16) 240 (9-7/16) 10 100 (3-15/16) 100 (3-15/16) 360.
Controls and Their Functions Video monitor unit • The illustrations show examples of BT-L2150P/2150E. Front Protective panel (J page 26) Front panel (J page 12) Tally lamp (J page 9, 25) Tilt stand (J page 27) indicates the protective panel screw (10 screws for BT-L2150P/2150E, 8 for BT-L1500P/1500E). indicates screws found only on BT-L2150P/2150E (not present on BT-L1500P/1500E).
Controls and Their Functions (continued) Front panel • The illustration shows an example of BT-L2150P/2150E. 1 2 3 4 5 Speakers Outputs audio from the AUDIO IN terminal, the SDI IN terminal (embedded audio) and the HDMI terminal (embedded audio). • Connecting headphones to the HEADPHONES output connector turns off the speakers. HEADPHONES output connector (Stereo mini-jack M3) Connect a pair of headphones to monitor the sound. • The sound volume and sound quality will depend on the headphones.
Controls and Their Functions (continued) Rear panel 1 2 3 4 5 6 7 SDI IN (HD/SD) terminals (BNC) 1 : SDI input terminal (compatible with HD/SD automatic switching) 2 : SDI input terminal (compatible with HD/SD automatic switching) • These terminals support embedded audio. HDMI terminal HDCP compliant HDMI signal input terminal • This terminal supports embedded audio. It is not VIERA link compliant.
Power Supply Connecting and fixing the power cable 1. Attach the power cable to the monitor unit. 2. Connect the power cable to the power outlet. Power cable Adjusting the Monitor Angle Tilt the unit toward the direction of the arrows to gain the monitor angle most fit for viewing. ヒパc ヒブc Forward Backward • The unit can be tilted up to 10 degrees forward and 15 degrees backward.
How to Use the On Screen Menu The screen displays five types of information: input signal status, picture adjusting buttons/volume button status, sharpness display, menu display and closed caption display. Input signal status 1. The selected input line (J page 12, ) • VIDEO, SDI1, SDI2, HDMI, YPBPR, PC 2. Signal format • Use STATUS DISPLAY in the SYSTEM CONFIG menu to set the display status (J page 21). • “UNSUPPORT SIGNAL” appears if an unsupported signal is input.
How to Use the On Screen Menu (continued) Menu display [MAIN MENU] • This is the menu display. • It disappears after approximately 2 minutes of inaction. Displays instructions on menu button operations. Closed caption (CC) display • Use the menu to display and set closed caption display for VIDEO (NTSC) signals. It also allows you to select CAPTION CHANNEL (CC1 to CC4). • When video signals are input while CLOSED CAPTION is set to ON, marker and status displays are not available.
How to Use the On Screen Menu (continued) Menu operations 1. Press [MENU] to display the MAIN MENU. 2. Press [ , [ENTER]. 3. Press [ , ] to select a sub menu and press [ENTER]. The settings in the sub menu change to green. ] to select a menu and press [MAIN MENU] 4. Press [ , ] to select a setting and press [ENTER]. To cancel, press [MENU]. To return to the previous screen, Press [MENU].
Main Menu Menu configuration MAIN MENU MARKER MARKER 16:9 VIDEO CONFIG GAMMA SELECT 4:3 COLOR TEMP. SYSTEM CONFIG CONT./BACK. CENTER SHARPNESS MODE BACKLIGHT STATUS DISPLAY SHARPNESS H D93 SD ASPECT D65 SETUP LOAD COLOR SPACE POWER DOWN GPI GPI CONTROL INPUT SELECT NTSC SETUP PC VAR1 [WHITE BALANCE VAR1]* VAR2 [WHITE BALANCE VAR2]* AUTO SETUP H-POSITION AUDIO INPUT SELECT V-POSITION EMBEDDED SELECT PHASE CLOCK WXGA/XGA COLOR TEMP.
Main Menu (continued) MARKER types ■ 16:9 marker (Displayed for HD input and SD input in 16:9 aspect ratio) Aspect marker is only displayed as a vertical bar. The shaded areas are grey in the illustrations to indicate MARKER specifications, but are not grey on the screen. (Displayed for HD input and SD input in 16:9 aspect ratio) Safe area marker is displayed as a dotted line.
Main Menu (continued) VIDEO CONFIG Underlined values indicate factory defaults. Sub menu GAMMA SELECT*1 Setting Description 2.2 2.35 Selects gamma curve. <2.2> Selects the gamma 2.2 curve. <2.35> Selects the gamma 2.35 curve. (A mode that approximates CRT display capability.) COLOR TEMP. D93 D65 VAR1*3 VAR2*3 Selects color temperature.
Main Menu (continued) SYSTEM CONFIG Underlined values indicate factory defaults. Sub menu Setting Description CONT./BACK. BACKLIGHT CONTRAST Selects function to be assigned to the CONT./B.LIGHT front panel buttons. Adjusts the B.LIGHT (backlight). Adjusts the CONT. (contrast). BACKLIGHT 0 to 60 Adjusts LCD backlight brightness. Adjust as required by ambient conditions.
Main Menu (continued) ■ PC The menus shown below appear when PC is selected as the input signal. Underlined values indicate factory defaults. Sub menu Setting Description AUTO SETUP*1 Automatically adjusts the screen when PC is selected as the input signal. A separate screen opens. Select YES to perform AUTO SETUP. H-POSITION*2 0 to 60 (Factory default setting: 30) Adjusts horizontal image display position. V-POSITION*2 0 to 60 (Factory default setting: 30) Adjusts vertical image display position.
Main Menu (continued) AUDIO Sets speaker and headphones output. Underlined values indicate factory defaults. Sub menu Setting Description INPUT SELECT AUTO ANALOG Selects speaker and headphones output.
Main Menu (continued) HOURS METER Sub menu Settings Description 1 OPERATION XXXXXXh* LCD XXXXXXh*1 *1 Displays the total number of hours it has been on. Displays the number of hours that the backlight has been on. "XXXXXX" indicates the number of hours. "XXXXXX": 175200h (about 20 years), 175200 or greater number results in “OVER”.
REMOTE Specifications This monitor permits remote operation from an external. GPI terminal GPI screen items correspond to the following terminals. The functions assigned to each terminal operate when GND (pin 5) is short-circuited (ON) or open (OFF). ■ Operating conditions Pin Signal Level operation: Operates when GND is short1 GPI1 circuited. 2 GPI2 Edge operation: Operates when GND changes from open to short-circuited.
Detaching and Attaching the Protective Panel The LCD panel is covered by a protective panel to protect it from damage during transportation. Remove the protective panel before use. Groove Protective panel screw Detaching the panel 1. Unscrew the protective panel screws (10 screws for BT-L2150P/2150E, 8 for BT-L1500P/1500E) using a Phillips screwdriver while supporting the protective panel with your hand. 2. Detach the protective panel.
Detaching and Attaching the Tilt Stand The tilt stand is detachable. • When detaching and attaching the protective panel, it is recommended that you place the unit flat on the edge of a desk or table with a soft cloth or similar material spread underneath. Detaching the tilt stand Attaching the tilt stand Tilt stand screws Plate ŋ Tilt stand screws Ō Ō ŋ A • The illustration shows an example for BT-L2150P/ 2150E. 1. Unscrew the tilt stand screws (four) using a Phillips screwdriver. 2.
Specifications ■ General Power input AC: Power supply Current consumption 100 V - 240 V, 50/60 Hz 0.60 A - 0.30 A AC: Power supply Current consumption 100 V - 240 V, 50/60 Hz 0.50 A - 0.25 A indicates safety information.
Specifications (continued) ■ List of compatible signal formats(3:Compatible) Input signal Display character example VIDEO SDI1 SDI2 HDMI NTSC 3 PAL PAL 3 640 x 480/59.94p 640 x 480 (60p) 3 640 x 480/60p 640 x 480 (60p) 3 480/59.94i 480/60i NTSC 3 3 3 3 480/60p 576/50i 576/50i 576/50p 576/50p 720/50p 720/50p 3 720/59.94p 720/60p 720/60p 720/60p 1080/23.98PsF PC 3 3 480/59.
INDEX Numerics N 16:9 ......................................................................................18 4:3........................................................................................18 NTSC SETUP...................................................................... 21 A OPERATION ....................................................................... 24 Accessories ...........................................................................8 Adjusting angle .........................
MEMO 31
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.
