Specification Sheet

Easy migration from analog to IP system with existing coaxial cable
Key Features
PoE (Power over Ethernet) ready
The coaxial - LAN converter is compliant with PoE standards (IEEE
802.3af), and contains a power supplying device. PoE can be used to
supply power to Panasonic network cameras, which eliminates the
need for installing power outlets for the cameras.
Use over long distances
The coaxial - LAN converter can be used for distances of up to 500 m
(1,640 feet 5 inches)
*1
for PoE connections, and 2 km (6,561 feet 8 inches)
for non-PoE connections. (When used with RG-6/U coaxial cable.)
High-speed transmission
The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or
over for TCP
*2
, and 45 Mbps or over for UDP connections. (When used with
RG-6/U coaxial cable, and for distances under 2 km [6,561 feet 8 inches].)
No setup required
Connections can be established by simply connecting the coaxial
cable to the coaxial - LAN converter.
Coaxial - LAN Converter with PoE function
BY-HPE11KTA
Camera Adaptor Center Adaptor
The BY-HPE11KTA is a coaxial - LAN converter capable of
implementing long distance, high speed digital data
transmission on existing coaxial cabling with low setup costs.
With the built-in PoE function, the BY-HPE11KTA is able to
supply power to Panasonic network cameras, which eliminates
the need for installing power outlets for the cameras.
*1 When connected to a Panasonic network camera. For other cameras the connection distance is
300 m (984 feet 3 inches).
*2 Measured using Linux
®
FTP.
Optional Accessory
Rack Mount Connecting Fitting
BY-HCA10A
(for mounting three or four Center Adaptor)
System Example
Standard Accessories
• Installation Guide ...........................1 pc.
• CD-ROM*
1
.....................................1 pc.
The followings are for installation.
• AC Cord .........................................1 pc.
• Safety Wire ....................................1 pc.
• BNC Connector Cover ................ 2 pcs.
• Screw for the Safety Wire and BNC
Connector Covers ...................... 3 pcs.
*1 Contains the documentation including the
Operating Instructions.
• Mounting Bracket ........................ 2 pcs.
•
Underside Continuous Connecting Bracket
..................................................... 2 pcs.
• Screw (Flat-head M3 x 6) .......... 32 pcs.
• Screw (M3 x 6) ............................. 6 pcs.
Network Camera
* When using a Panasonic network camera
Powered by PoE
Coaxial cable
Power Supply
With PoE function: 500 m (1,640 feet 5 inches)*
Without PoE function: 2 km (6,561 feet 8 inches)*
Digital Signals
Camera Adaptor Center Adaptor
Network Disk Recorder
PC
Ethernet
cable
Power Source