VQT1Q93_ENG_PP.book 1 ページ 2008年3月6日 木曜日 午後5時42分 Operating Instructions Memory Card Camera-Recorder Model No. AG-HMC70P Before operating this product, please read the insructions carefully and save this manual for future use.
VQT1Q93_ENG_PP.book 2 ページ 2008年3月6日 木曜日 午後5時42分 Read this first! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
VQT1Q93_ENG_PP.book 3 ページ 2008年3月6日 木曜日 午後5時42分 AC Adapter The rating plate is on the underside of the AC Adapter. Disconnect the AC mains plug from the AC mains socket when not in use. CAUTION: Danger of explosion or fire if battery is mistreated. For Battery Pack ≥Replace only with same or specified type. ≥Do not disassemble or dispose of in fire. ≥Do not store in temperatures over 60 °C (140 °F).
VQT1Q93_ENG_PP.book 4 ページ 2008年3月6日 木曜日 午後5時42分 Declaration of Conformity Model Number: AG-HMC70P Trade Name: PANASONIC Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support contact: Panasonic Broadcast & Television Systems Company 1-800-524-1448 This device complies with Part 15 of FCC Rules.
VQT1Q93_ENG_PP.book 5 ページ 2008年3月6日 木曜日 午後5時42分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
VQT1Q93_ENG_PP.book 6 ページ 2008年3月6日 Precautions USE & LOCATION WARNING ≥AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE THE SD CARD. CAUTION ≥DO NOT AIM YOUR CAMERA AT THE SUN OR OTHER BRIGHT OBJECTS ≥DO NOT LEAVE THE CAMERA WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE DAMAGE TO THE INTERNAL PARTS OF THE EVF ≥DO NOT EXPOSE YOUR CAMERA TO EXTENDED HIGH TEMPERATURE ...
VQT1Q93_ENG_PP.book 7 ページ 2008年3月6日 ª Indemnity concerning recording content The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this unit, its accessories or recordable media. IMPORTANT ª Carefully observe copyright laws Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights.
VQT1Q93_ENG_PP.book 8 ページ 2008年3月6日 木曜日 午後5時42分 Contents Read this first! ........................................ 2 Recording Before using Recording motion pictures ................. 44 Recording modes/recordable time available for the motion picture ...... 46 Recording still pictures (JPEG) .......... 47 Picture Quality/Approximate Number of Recordable Pictures on an SD Card ........................................ 51 Various recording functions ...............
VQT1Q93_ENG_PP.book 9 ページ 2008年3月6日 木曜日 午後5時42分 Contents Editing Others Editing scenes...................................... 73 Menus and Indications ...................... 102 Deleting scenes........................................73 Protecting scenes.....................................74 Menu list................................................. 102 Menus related to [ADVANCED] and [SETUP] ...................................... 104 Indications..............................................
VQT1Q93_ENG_PP.book 10 ページ 2008年3月6日 Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥If you use this unit on top of or near a TV, the pictures and sound on this unit may be disrupted by electromagnetic wave radiation.
VQT1Q93_ENG_PP.book 11 ページ 2008年3月6日 Mounting the camera-recorder on a tripod ≥The tripod mounting hole is 5.5 mm deep. Do not force the tripod screw beyond this depth.You can damage the camera-recorder if you use any screw other than 1/4-20UNC. (l 23) About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls.
VQT1Q93_ENG_PP.book 12 ページ 2008年3月6日 About the SD card ≥The memory capacity indicated on the label of an SD card is the total of the capacity for copyright protection and management and the capacity which can be used on the unit, a computer etc. ≥During prolonged use, the unit’s surfaces and the SD card will heat up slightly. This is normal. Always set the mode dial to OFF when inserting or removing an SD card.
VQT1Q93_ENG_PP.book 13 ページ 2008年3月6日 木曜日 午後5時42分 About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
VQT1Q93_ENG_PP.book 14 ページ 2008年3月6日 木曜日 午後5時42分 Before using Before using Features of Memory Card Camera Recorder Very clear high definition pictures This unit is an AVCHD format video camera for recording highly detailed high definition images on an SD card. You can watch images in high-resolution HD video if you connect this unit and a high definition TV and then play back the images.
VQT1Q93_ENG_PP.book 15 ページ 2008年3月6日 木曜日 午後5時42分 Before using Watching high definition images If you connect this unit and a high definition TV with a HDMI cable (optional) and then play back the pictures, you can enjoy watching them in high definition. A High definition TV B HDMI cable (optional) ≥If you connect this unit to a TV that does not support high definition, the images will be standard quality.
VQT1Q93_ENG_PP.book 16 ページ 2008年3月6日 木曜日 午後5時42分 Before using Saving the data on the SD card When the SD card is full or to prevent the data from being deleted, use the supplied software (HD Writer Ver2.5) to copy the data on the SD card to the hard disk of the computer. A USB cable (optional) ª What you can do with HD Writer [Copy to PC] You can copy motion picture data and still picture data on an SD card to the hard disk of the computer.
VQT1Q93_ENG_PP.book 17 ページ 2008年3月6日 木曜日 午後5時42分 Before using Accessories Check the accessories before using this unit. ≥Product numbers correct as of January 2008 Remote control Button-type battery CR2025 Battery pack VW-VBG260 AC adaptor VW-AD20 AC cable DC cable CD-ROM k 2 ≥Operating instructions ≥HD Writer 2.5E for HDC Shoulder belt SD memory card (2GB) Eye cup Lens hood cap Ferrite core Operating instructions ≥Please refer to Page 80 for the ferrite core fitting method.
VQT1Q93_ENG_PP.
VQT1Q93_ENG_PP.
VQT1Q93_ENG_PP.book 20 ページ 2008年3月6日 木曜日 午後5時42分 Before using 31 32 29 30 38 39 33 34 35 29) 30) 31) 32) 33) 34) 35) 36) 37) 38) 39) 40) 41) 42) 43) 36 37 41 42 43 Viewfinder (l 42) Eye cup (l 17) Component Connectors (Y, PB, PR/BNC) (l 82) Video Output Connector (BNC) (l 84) DC input terminal [DC IN 7.
VQT1Q93_ENG_PP.book 21 ページ 2008年3月6日 木曜日 午後5時42分 Before using 44 45 46 47 49 50 51 48 44) Internal microphones (l 58) 45) Accessory shoe ≥You can fit a microphone (optional), etc.
VQT1Q93_ENG_PP.book 22 ページ 2008年3月6日 木曜日 午後5時42分 Before using Using grip belt Shoulder belt installation hole Adjust the length of the grip belt so that it fits your hand, and hold it properly. This is for installing the shoulder belt and carrying the camera on your neck or shoulder. 1 Open the belt cover and loosen 1 Thread the belt through the the belt. shoulder belt installation hole A. 2 Work your hand through the grip belt and fasten the belt.
VQT1Q93_ENG_PP.book 23 ページ 2008年3月6日 木曜日 午後5時42分 Before using Tripod receptacle Lens Hood Piece The tripod receptacle is a hole used to mount a tripod for the unit. (For details on mounting the tripod, refer to the operating instructions for the tripod.) ≥Responsible for the ISO 1222 (1/4 inch) ≥The tripod mounting hole is 5.5 mm deep. Do not force the tripod screw beyond this depth.You can damage the camera-recorder if you use any screw other than 1/4-20UNC.
VQT1Q93_ENG_PP.book 24 ページ 2008年3月6日 木曜日 午後5時42分 Before using Using the LCD monitor Using the finder You can record the image while viewing it on the LCD monitor. 1 2 3 4 1 Place your finger on LCD monitor open latch and pull the LCD monitor out in the direction of the arrow. Adjust the angle. Loosen the lock ring. Adjust the horizontal position. Tighten the lock ring 1 4 ≥It can open up to 90o. 2 Adjust the angle of the LCD 2 3 monitor as desired.
VQT1Q93_ENG_PP.book 25 ページ 2008年3月6日 木曜日 午後5時42分 Before using Using the remote control 1 2 3 PHOTO EXT DISPLAY SHOT DATE/ TIME START/ STOP 7 ZOOM SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP SKIP MENU 5 6 Install the supplied button-type battery in the remote control before using it. 1 While pressing the stopper A, pull out the battery holder.
VQT1Q93_ENG_PP.book 26 ページ 2008年3月6日 Before using ª Remote control usable range The distance between the remote control and the unit’s remote control sensor A: Within approx. 5m Angle: Approximately 10° upward, approximately 15° downward, approximately 15° leftward, or approximately 75° rightward 10° 15° 15° 75° ≥The remote control is intended for indoor operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges.
VQT1Q93_ENG_PP.book 27 ページ 2008年3月6日 木曜日 午後5時42分 Before using Cards that you can use with this unit Card type SDHC Memory Card SD Memory Card Capacity 8 MB, 16 MB 32 MB, 64 MB, 128 MB Motion picture recording Cannot be used. Cannot be guaranteed in operation.¢ Still picture recording 4 GB 8 GB 16 GB 256 MB, 512 MB, 1 GB, 2 GB Refer to “About SD cards that you can use for motion picture recording”. Can be used.
VQT1Q93_ENG_PP.book 28 ページ 2008年3月6日 木曜日 ≥Check the support site below for the most recent information on SD / SDHC memory cards usable in this unit. https://eww.pavc.panasonic.co.jp/pro-av/ ≥For the purposes of these operating instructions, SD Memory Card and SDHC Memory Card are referred to as the “SD card”. ≥This unit supports SD Memory Cards formatted in FAT12 system and FAT16 system based on SD Memory Card Specifications and SDHC Memory Cards formatted in FAT32 system.
VQT1Q93_ENG_PP.book 29 ページ 2008年3月6日 木曜日 午後5時42分 Setup Setup Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ≥Connect the battery to an AC adaptor to recharge it. The battery cannot be recharged by simply inserting it into the unit. ≥If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor.
VQT1Q93_ENG_PP.book 30 ページ 2008年3月6日 木曜日 午後5時42分 Setup Inserting/removing the battery Inserting the battery Removing the battery Press the battery removal button. Mount the battery from the top, and insert it until the audible click. ≥The lock can be released and the battery removed. ≥Be sure to set the mode dial to OFF and check that the status indicator is off before removing the battery. CAUTION Danger of explosion if battery is incorrectly replaced.
VQT1Q93_ENG_PP.book 31 ページ 2008年3月6日 木曜日 午後5時42分 Setup Charging time and recordable time ª About batteries that you can use for this unit The Panasonic battery that can be used with this unit are VW-VBG260 and VW-VBG6 (product numbers correct as of January 2008). VW-VBG260 and VW-VBG6 come with a function to check whether the battery and unit can be safely used together.
VQT1Q93_ENG_PP.book 32 ページ 2008年3月6日 木曜日 午後5時42分 Setup ª About the remaining battery capacity indication The remaining battery capacity is displayed in minutes when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. Connecting to the AC outlet ≥Even if the battery is inserted in this unit, it will not charge. 1 Connect the AC cable to the AC adaptor. 30min ≥The display changes as the battery capacity reduces. # # # # .
VQT1Q93_ENG_PP.book 33 ページ 2008年3月6日 木曜日 午後5時42分 Setup Selecting a mode (Turning the unit on/off) How to turn off the power Rotate the mode dial to switch to recording, playback, PC connection or power OFF. ≥Rotate the mode dial slowly. Set the mode dial to OFF. How to turn on the power While pressing the lock release button, set the mode dial to , or PC . The status indicator goes off and the power turns off.
VQT1Q93_ENG_PP.book 34 ページ 2008年3月6日 木曜日 午後5時42分 Setup Inserting/removing an SD card Be sure to set the mode dial to OFF before inserting/removing an SD card. If the SD card is inserted or removed while the power is on, this unit may malfunction or the data recorded on the SD card may be lost. 1 Set the mode dial to OFF. ≥Check that the status indicator has gone off. 2 Open the card slot cover and ª Concerning the SD card ≥Do not touch the terminals on the back of the SD card.
VQT1Q93_ENG_PP.book 35 ページ 2008年3月6日 木曜日 午後5時42分 Setup How to use the cursor button This unit has a cursor button A for selecting functions, performing operations etc. so it is easy to operate this unit with one hand. Operations during recording ¬ Rotate the mode dial to select . 1 Press the center of the cursor button, and icons will be displayed on the screen.
VQT1Q93_ENG_PP.book 36 ページ 2008年3月6日 Setup Operations during playback ¬ Rotate the mode dial to select . 1 Select the scene for playback using the cursor button and press the center of the button to make the selection. ≥The selected scene is played back on the full screen. ≥The operation icon is automatically displayed on the screen. 2 Operate by pushing the up, down, right, or left button of the cursor button.
VQT1Q93_ENG_PP.book 37 ページ 2008年3月6日 木曜日 午後5時42分 Setup About the operation icons displayed in each mode Recording mode 3/3 2/3 1/3 Cursor button Icon — Function Page 3 Backlight compensation 54 2 Fade 54 Set the AUTO/MANUAL/FOCUS switch to MANUAL. In manual mode [MANUAL] 3 White balance 63 2 Iris or gain value 64 1 Shutter speed 64 Set the AUTO/MANUAL/FOCUS switch to FOCUS.
VQT1Q93_ENG_PP.book 38 ページ 2008年3月6日 木曜日 午後5時42分 Setup Playback mode ( In still picture playback) Icon Cursor button 1/; 3 Slide show start/pause 71 ∫ 4 Stop playback and show thumbnails 71 E 2 Playback previous picture (during pause) 71 D 1 Playback next picture (during pause) 71 Function Page ª About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, and color balance (white balance) and focusing will be adjusted automatically.
VQT1Q93_ENG_PP.book 39 ページ 2008年3月6日 木曜日 午後5時42分 Setup Using the menu screen Refer to “Menu list” (l 102) for information about the menus. 1 While stopped, press the MENU 4 Select the Sub Menu by pressing the up or down button of the cursor button. C button. C Current settings on menus ≥The menu displayed differs depending on the position of the mode dial. ≥Do not switch the mode dial when the menu is displayed.
VQT1Q93_ENG_PP.book 40 ページ 2008年3月6日 木曜日 午後5時42分 Setup To get back to the previous screen Press the left button of the cursor button. Operating with remote control The menu screen transition is the same as when the buttons on the main unit are used. 1 Press the MENU button. To exit the menu screen Press the MENU button. ≥The menu screen does not appear during recording or playing. You cannot start other operations while the menu screen appears. MENU ENTER 2 Select a menu item.
VQT1Q93_ENG_PP.book 41 ページ 2008年3月6日 木曜日 午後5時42分 Setup Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. ≥Press the button up or down button of the cursor button to select [YES], press the center of the cursor button and then perform steps 2 and 3 below to set the date and time. If the screen shows the incorrect date and time, then adjust it. ¬ Rotate the mode dial to select .
VQT1Q93_ENG_PP.book 42 ページ 2008年3月6日 木曜日 午後5時42分 Setup 24 hours and the battery will save the date and time for approx. 6 months. (The battery is still being recharged even if the mode dial is set to OFF.) Adjusting LCD monitor/finder Adjusting the brightness and the color level of the LCD monitor/ finder 1 Press the MENU button, then select [SETUP] # [LCD SET] or [EVF SET]# [YES] and press the center of the cursor button.
VQT1Q93_ENG_PP.book 43 ページ 2008年3月6日 木曜日 午後5時42分 Setup To adjust the viewing conditions of images in the finder Pull the finder to pull out the visibility adjustment lever A inside, and then move the lever to make the adjustments. Viewfinder maintenance If the inside of the viewfinder is stained with dust, then remove the eye cup holder and remove the dust with an air blower, etc. ª Eye cup holder removal method 1Pull the viewfinder to pull out the eye cup holder A.
VQT1Q93_ENG_PP.book 44 ページ 2008年3月6日 木曜日 午後5時42分 Recording Recording To end the recording Press the recording start/stop button again to pause recording. Recording motion pictures Record motion pictures on an SD card. ≥Use an SD card that can be used for motion picture recording. (l 27) ≥This unit records high definition images that are compatible with the 16:9 aspect ratio of a wide-screen TV. 1 Rotate the mode dial to select . 2 Open the LCD monitor.
VQT1Q93_ENG_PP.book 45 ページ 2008年3月6日 木曜日 午後5時42分 Recording ª Screen indications in the recording mode A B C A Recording mode B Remaining time left for recording (When the remaining time is less than 1 minute, [R0min] flashes red.) C Recording time elapsed ≥Maximum number of recordable scenes: 990 (It may not be possible to record 990 scenes even if there is available memory on the SD card.
VQT1Q93_ENG_PP.book 46 ページ 2008年3月6日 木曜日 午後5時42分 Recording Recording modes/recordable time available for the motion picture Switch the picture quality of the motion pictures to be recorded. ¬ Rotate the mode dial to select . Press the MENU button, then select [VIDEO] # [REC MODE] # desired item and press the center of the cursor button.
VQT1Q93_ENG_PP.book 47 ページ 2008年3月6日 木曜日 午後5時42分 Recording Recording still pictures (JPEG) Record the still picture on an SD card. ≥This number of recording pixels for still pictures is compatible with the 16:9 aspect ratio of a wide-screen TV. They are recorded at 1920k1080. 1 Rotate the mode dial to select . A B A Focus indication ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful.
VQT1Q93_ENG_PP.book 48 ページ 2008年3月6日 木曜日 午後5時42分 Recording To record still pictures clearly ≥When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the slight shaking from holding this unit by hand. We recommend decreasing the zoom magnification and approaching the subject when recording. ≥You can record stable pictures without shaking by using a tripod and the remote control.
VQT1Q93_ENG_PP.book 49 ページ 2008年3月6日 木曜日 午後5時42分 Recording ª About the focus indication ≥The focus indication does not appear in manual focus mode. ≥Focus on a subject manually when it is not easily focused automatically. ≥You can record still pictures on the card even if the focus indication does not appear, but pictures may be recorded without being focused. ≥The focus indication does not appear or has difficulty displaying in the following cases. – When the zoom magnification is high.
VQT1Q93_ENG_PP.book 50 ページ 2008年3月6日 Recording About simultaneous recording (recording still pictures while recording motion pictures) You can record still pictures even while recording motion pictures. While recording motion pictures, press the PHOTO SHOT button fully (press to the bottom) to take the picture. ≥This function is not activated if the PHOTO SHOT button is pressed halfway. ≥The screen indications that appear only when the PHOTO SHOT button is pressed halfway will be displayed.
VQT1Q93_ENG_PP.book 51 ページ 2008年3月6日 木曜日 午後5時42分 Recording Picture Quality/Approximate Number of Recordable Pictures on an SD Card Picture quality Selecting the picture quality. Press the MENU button, then select [PICTURE] # [PICT. QUALITY] # desired item and press the center of the cursor button. : Still pictures with a high picture quality are recorded. : Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality.
VQT1Q93_ENG_PP.book 52 ページ 2008年3月6日 木曜日 午後5時42分 Recording Various recording functions Operate the handle zoom button. Zoom in/out function You can zoom in or out using the grip or handle zoom button. You can zoom in up to 12k optically. ¬ Rotate the mode dial to select T W . Operate with the grip zoom button. T W T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) ≥The zooming speed can be switched between three steps using the handle zoom button.
VQT1Q93_ENG_PP.book 53 ページ 2008年3月6日 木曜日 午後5時42分 Recording Recording yourself Digital zoom function If the zoom magnification exceeds 12k, then the digital zoom function will be activated. The maximum magnification provided by the digital zoom can be switched. When the LCD monitor is turned to the lens side, the right and left of the images displayed on the LCD monitor are reversed as in a mirror. (The recorded pictures are unchanged.
VQT1Q93_ENG_PP.book 54 ページ 2008年3月6日 木曜日 午後5時42分 Recording Backlight compensation function Fade in/fade out function This is for preventing a backlit subject from being darkened. Use this function when the light is emanating from behind the subject and the subject appears dark. ¬ Rotate the mode dial to select . 1 Press the center of the cursor button. Then press the down button to display the icon shown in the illustration. Fade in: The image and audio gradually appear.
VQT1Q93_ENG_PP.book 55 ページ 2008年3月6日 木曜日 午後5時42分 Recording 4 Press the recording start/stop button. Pause recording. (Fade out) Image stabilizer function This is for reducing image shakes (jitter) during recording. Reduces the image shaking (jitter) due to hand movement when recording. ¬ Rotate the mode dial to select . Press the MENU button, then select [BASIC] # [O.I.S.] # [ON] and press the center of the cursor button. The image/audio gradually disappears.
VQT1Q93_ENG_PP.book 56 ページ 2008年3月6日 木曜日 午後5時42分 Recording Guide line function Zebra display This is for viewing the slope and the balance of the image while recording or playing back. This is for displaying the parts that are too bright. It is possible to confirm whether the displayed images are flat or not while recording or during playback. Use it as a guide for framing balance and confirm the area to be displayed on a TV with the aspect ratio of 4:3.
VQT1Q93_ENG_PP.book 57 ページ 2008年3月6日 木曜日 午後5時42分 Recording Color bar This is for displaying a color bar to check the color tone. This unit displays a 7 color bar which is useful for adjusting the picture quality of the TV or the external monitor. ¬ Rotate the mode dial to select . Press the MENU button, then select [ADVANCED] # [COLOR BAR]# [ON] and press the center of the cursor button.
VQT1Q93_ENG_PP.book 58 ページ 2008年3月6日 木曜日 午後5時42分 Recording Input Audio Selection The camera will record two-channel audio. Select from the built-in microphone, an external microphone, or any microphones or audio devices connected to the XLR CH1/CH2 terminal to record audio on the respective channels. (Refer to the following table.
VQT1Q93_ENG_PP.book 59 ページ 2008年3月6日 木曜日 午後5時42分 Recording Use the external microphone or audio devices connected to the XLR terminal. 1 Connect the external microphone or an audio device to the XLR CH1/CH2 terminal (XLR 3-pin) CH1 the sensitivity increases, which may introduce noise into the recording. 3 Set the input level select switch to +48V to use a phantom microphone (a microphone that requires the +48V power supply).
VQT1Q93_ENG_PP.book 60 ページ 2008年3月6日 木曜日 午後5時42分 Recording 2 Adjust the recording level with Audio Recording Level the AUDIO LEVEL knob. ≥Adjust the audio recording level with the AUDIO LEVEL knob according to the audio level meter on the bottom of the LCD monitor or viewfinder. The recording level of audio signals can be adjusted when recording.
VQT1Q93_ENG_PP.book 61 ページ 2008年3月6日 木曜日 午後5時42分 Recording Manual recording functions Scene mode [ ] Surf & snow To record images in bright places such as ski slopes and beaches To cancel the scene mode function This is for recording in various situations. When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ¬ Rotate the mode dial to select . 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL.
VQT1Q93_ENG_PP.book 62 ページ 2008年3月6日 木曜日 午後5時42分 Recording ≥The center of the screen is not enlarged when [MF ASSIST] is [OFF]. Manual focus adjustment If auto focusing is difficult due to the conditions, then manual focusing is available. ¬ Rotate the mode dial to select 1 . (When MF assist function is used) Press the MENU button, then select [ADVANCED] # [MF ASSIST] # [ON] and press the center of the cursor button.
VQT1Q93_ENG_PP.book 63 ページ 2008年3月6日 木曜日 午後5時42分 Recording White balance This is for recording in natural colors. The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ¬ Rotate the mode dial to select . 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. ≥Lights used for wedding receptions at hotels, stage spotlights in theatres ≥Sunrise, sunset etc.
VQT1Q93_ENG_PP.book 64 ページ 2008年3月6日 木曜日 午後5時42分 Recording ª About the white balance sensor Manual shutter speed/aperture adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Aperture: Adjust it when the screen is too bright or too dark. ¬ Rotate the mode dial to select The white balance sensor A detects the type of light source during recording. Do not cover the white balance sensor during recording, or it may not function properly.
VQT1Q93_ENG_PP.book 65 ページ 2008年3月6日 木曜日 午後5時42分 Recording B Iris/Gain value: CLOSE # (F16 to F2.0) # OPEN # (0dB to 18dB) ≥Value closer to [CLOSE] darken the image. ≥Value closer to [18dB] brighten the image. ≥When the iris value is adjusted to brighter than [OPEN], it changes to the gain value. To restore to automatic adjustment Set the AUTO/MANUAL/FOCUS switch to AUTO. ≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value.
VQT1Q93_ENG_PP.book 66 ページ 2008年3月6日 木曜日 午後5時42分 Playback 3 Select the scene to be played Playback Motion picture playback back. Play back motion pictures. 1 Rotate the mode dial to select . B C D 2 Press the cursor button up and then left to select the picture playback) tab. (motion A B Previous page C Next page D Scene number The selected scene will be encircled by a yellow frame.
VQT1Q93_ENG_PP.book 67 ページ 2008年3月6日 木曜日 午後5時42分 Playback * Press the 6 or 5 button on the remote control. ª About motion picture compatibility ≥This unit is based on the AVCHD format. ≥The video signal that can be played back on this unit is 1440k1080/60i. ≥The video signals in 1920x 1080/60i cannot be played back.
VQT1Q93_ENG_PP.book 68 ページ 2008年3月6日 木曜日 午後5時42分 Playback Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Move the cursor button up during playback to pause the playback. 2 Move the cursor button right. To adjust the volume The volume of the speaker and the headphone when playback is adjusted. Move the MONITOR LEVEL knob to change the volume level. (The frames will be advanced one at a time in the reverse direction when you move the cursor button left.
VQT1Q93_ENG_PP.book 69 ページ 2008年3月6日 木曜日 午後5時42分 Playback Playing back motion pictures by date Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. 1 Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and press the center of the cursor button. To return to playing back all the scenes Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [VIEW ALL] and press the center of the cursor button.
VQT1Q93_ENG_PP.book 70 ページ 2008年3月6日 木曜日 午後5時42分 Playback Repeat playback Playback of the first scene starts after playback of the last scene finishes. Press the MENU button, then select [PLAY SETUP] # [REPEAT PLAY] # [ON] and press the center of the cursor button. The [ ] indication appears on the thumbnail and full screen views. ≥The following scenes can be played back repeatedly.
VQT1Q93_ENG_PP.book 71 ページ 2008年3月6日 木曜日 午後5時42分 Playback Still picture (JPEG) playback Play back the still pictures recorded on the card. 1 Rotate the mode dial to select . ≥If 9 or more files have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or moving the cursor button down, selecting / by moving the cursor button left and right and then pressing the center of the cursor button.
VQT1Q93_ENG_PP.book 72 ページ 2008年3月6日 Playback ª About still picture compatibility ≥This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) ≥If a non-standard file is played back, the folder/ file name may not be displayed.
VQT1Q93_ENG_PP.book 73 ページ 2008年3月6日 木曜日 午後5時42分 Editing Editing Deleting multiple scenes from the thumbnail display Editing scenes ¬ Rotate the mode dial to select and then select the picture playback) tab. Deleting scenes This is for deleting scenes recorded on SD cards. (motion 1 Press the button while the thumbnail view screen is displayed. The deleted scenes cannot be restored. Deleting scenes one at a time ¬ Rotate the mode dial to select and then select the picture playback) tab.
VQT1Q93_ENG_PP.book 74 ページ 2008年3月6日 木曜日 午後5時42分 Editing The selected scene is encircled by a red frame. ≥When the cursor button is pressed again, the selected scene will be canceled. ≥Up to 50 scenes can be set in succession. 4 (Only when [SELECT] is selected in step 2) Press the button. 5 When the confirmation message appears, select [YES], then press the center of the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-5.
VQT1Q93_ENG_PP.book 75 ページ 2008年3月6日 木曜日 午後5時42分 Editing Editing still pictures Deleting still pictures This is for deleting still picture files recorded on SD cards. The deleted files cannot be restored. Deleting multiple files from the thumbnail display ¬ Rotate the mode dial to select and then select the playback) tab. (still picture 1 Press the button while the thumbnail view screen is displayed. Deleting files one at a time ¬ Rotate the mode dial to select and then select the playback) tab.
VQT1Q93_ENG_PP.book 76 ページ 2008年3月6日 木曜日 午後5時42分 Editing 4 (Only when [SELECT] is selected in step 2) Press the button. 5 When the confirmation message appears, select [YES], then press the center of the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other files Repeat steps 3-5. To complete editing Press the MENU button.
VQT1Q93_ENG_PP.book 77 ページ 2008年3月6日 木曜日 午後5時42分 Editing To complete the settings DPOF setting This is for writing the printing data on an SD card. You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Rotate the mode dial to select and then select the playback) tab. (still picture 1 Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [SET] and press the center of the cursor button. Press the MENU button.
VQT1Q93_ENG_PP.book 78 ページ 2008年3月6日 Card management Card management Formatting Formatting an SD card This is for initializing cards. Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer etc. ¬ Rotate the mode dial to select or . 1 Press the MENU button, then select [SETUP] # [FORMAT CARD] # [YES] and press the center of the cursor button.
VQT1Q93_ENG_PP.book 79 ページ 2008年3月6日 木曜日 午後5時42分 With other products With other products ª To display the on-screen information on the TV With a TV The information displayed on the screen (operation icon and time code etc.) can be displayed on the TV. Playback on TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Connect this unit to a TV with one of the following terminals.
VQT1Q93_ENG_PP.book 80 ページ 2008年3月6日 木曜日 午後5時42分 With other products 1 Connecting with a HDMI cable (optional) What is HDMI? HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal. If you connect this unit and a HDMI compatible high definition TV and then play back the recorded high definition images (l 14), you can enjoy them in high resolution with high quality sound.
VQT1Q93_ENG_PP.book 81 ページ 2008年3月6日 木曜日 午後5時42分 With other products ª About the settings when connecting with HDMI When this unit is connected to another device with a HDMI cable, the output setting on this unit can be changed. HDMI output resolution You can switch the method to output the images. Press the MENU button, then select [SETUP] # [HDMI RESOLUTION] # desired item and press the center of the cursor button.
VQT1Q93_ENG_PP.book 82 ページ 2008年3月6日 木曜日 午後5時42分 With other products 2Connecting with a component video cable (optional) and an audio cable (optional) 1 Connect the unit and TV with a component video cable (optional) and an audio cable (optional). Y Y PB PB PR COMPONENT VIDEO IN PR AUDIO IN A Component video cable (optional) B Audio cable (optional) ≥Connect to terminals of the same color.
VQT1Q93_ENG_PP.book 83 ページ 2008年3月6日 木曜日 午後5時42分 With other products ª If the image or audio from this unit is not output on the TV ≥Check that the plugs are inserted as far as they go. ≥Check the connected terminal. ≥Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.) ≥If the images are not displayed correctly on a wide-screen TV, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.
VQT1Q93_ENG_PP.book 84 ページ 2008年3月6日 木曜日 午後5時42分 With other products 3 Connecting with a video cable (optional) and an audio cable (optional) 1 Connect the unit and TV with a video cable (optional) and an audio cable (optional). VIDEO OUT VIDEO IN AUDIO IN A Video cable (optional) B Audio cable (optional) 2 Set the mode dial to to turn on the power. 3 Change the input channel on the TV. Example: Select the [Video 2] channel etc.
VQT1Q93_ENG_PP.book 85 ページ 2008年3月6日 木曜日 午後5時42分 With other products Dubbing images onto a connected DVD recorder or video device This is for dubbing images recorded on this unit onto a DVD recorder, video device etc. ≥Images are dubbed in standard quality. ≥Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a video device.
VQT1Q93_ENG_PP.book 86 ページ 2008年3月6日 木曜日 午後5時42分 With other products With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) ≥Use the AC adaptor to free you from worrying about the battery running down. ¬ Insert an SD card with recorded images in this unit and then set the mode dial to to turn on the power. 1 Connect this unit and a printer.
VQT1Q93_ENG_PP.book 87 ページ 2008年3月6日 木曜日 午後5時42分 With other products 7 Select the layout setting on [PAGE LAYOUT]. [STANDARD]: Layout specific to the printer [ ]: No frame print [ ]: Frame print ≥You cannot set page layouts not supported on the printer. 8 Select [PRINT] # [YES] and press the center of the cursor button to print the pictures. ≥Exit PictBridge by disconnecting the USB cable (optional) after the pictures have been printed.
VQT1Q93_ENG_PP.book 88 ページ 2008年3月6日 木曜日 午後5時42分 With a computer With a computer Before using with a computer What you can do with a computer Data type Can do Software used [Copy to PC] [Write data to media]* [Copy between media]* Motion picture [Play back on a PC] HD Writer Ver2.
VQT1Q93_ENG_PP.book 89 ページ 2008年3月6日 木曜日 午後5時42分 With a computer Contents on provided CD-ROM (“HD Writer 2.5E for HDC”) The following software applications are contained on the provided CD-ROM (“HD Writer 2.5E for HDC”). ª HD Writer Ver2.5 You can acquire data of motion pictures and still pictures on an SD card to the hard disk of the computer, easily edit (split, merge, delete) the motion pictures, then write the data to an SD card or disc.
VQT1Q93_ENG_PP.book 90 ページ 2008年3月6日 木曜日 午後5時42分 With a computer End User License Agreement Before opening the CD-ROM (“HD Writer 2.5E for HDC”) package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
VQT1Q93_ENG_PP.book 91 ページ 2008年3月6日 木曜日 午後5時42分 With a computer Operating environment ≥Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥A CD-ROM drive is necessary to install the supplied software applications. (A compatible DVD writer drive and media are necessary for writing to a DVD.) ≥Operation is not guaranteed in the following cases.
VQT1Q93_ENG_PP.book 92 ページ 2008年3月6日 木曜日 午後5時42分 With a computer ª Operating environment for HD Writer Ver2.5 (continued) Necessary software Windows Vista: DirectX 10 Windows XP/2000: DirectX 9.0c ≥If you install the software on a PC that is not compatible with DirectX 9.0c, the PC may not work properly. If you are unsure whether or not your PC is compatible, contact the maker of your PC. Sound DirectSound Support Interface USB port [Hi-Speed USB (USB 2.
VQT1Q93_ENG_PP.book 93 ページ 2008年3月6日 木曜日 午後5時42分 With a computer ª Operating environment for the card reader function (mass storage) PC IBM PC/AT compatible PC OS Microsoft Windows 2000 Professional Service Pack 4 Microsoft Windows XP Home Edition Microsoft Windows XP Professional Microsoft Windows Vista Home Basic Microsoft Windows Vista Home Premium Microsoft Windows Vista Ultimate Microsoft Windows Vista Business Microsoft Windows Vista Enterprise CPU Windows Vista: Intel Pentium III 1.
VQT1Q93_ENG_PP.book 94 ページ 2008年3月6日 木曜日 午後5時42分 With a computer Installation When installing the software, log on to your PC as the Administrator (or with a user name with equivalent authorization) or with the user name for a standard user account. (If you do not have authorization to do this, consult your manager.) ≥Before starting the installation, close any other software applications which are running. ≥Do not perform any other operations on your computer while the software is being installed.
VQT1Q93_ENG_PP.book 95 ページ 2008年3月6日 木曜日 午後5時42分 With a computer 5 Click [Finish]. Software application uninstallation Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program]. The PC must be rebooted for the application to work.
VQT1Q93_ENG_PP.book 96 ページ 2008年3月6日 木曜日 午後5時42分 With a computer Connection and recognition Connection and recognition procedures After the software applications are installed, this unit must be connected to the computer and be correctly recognized by the computer. ≥Connect after installing the software applications. ≥Remove the supplied CD-ROM (“HD Writer 2.5E for HDC”) if it is inserted in the computer.
VQT1Q93_ENG_PP.book 97 ページ 2008年3月6日 木曜日 午後5時42分 With a computer About the computer display When the unit is connected to a computer, it is recognized as an external drive. [Removable Disk] is displayed in [My Computer].
VQT1Q93_ENG_PP.book 98 ページ 2008年3月6日 木曜日 午後5時42分 With a computer To disconnect USB cable safely 2 Click the [Hardware] tab, then click [Device Manager]. 1 Double click the icon in task tray displayed on the computer. ≥Hardware disconnect dialogue appears. ≥Depending on your computer’s settings, this icon may not be displayed. 2 Select [USB Mass Storage Device] and click [Stop]. 3 Verify [MATSHITA AG-HMC70 USB Device] is selected and click [OK].
VQT1Q93_ENG_PP.book 99 ページ 2008年3月6日 木曜日 午後5時42分 With a computer Using HD Writer Ver2.5 3 Connect this unit and a computer. Using HD Writer Ver2.5, you can copy images recorded on this unit to the hard disk of the computer. To play back copied images, use the playback function of HD Writer Ver2.5 or write the data from the HDD on a PC to an SD card and connect this unit to a TV. (l 79) ≥When using HD Writer Ver2.5, log on to your computer as Administrator with a login name equally authorized.
VQT1Q93_ENG_PP.book 100 ページ 2008年3月6日 木曜日 午後5時42分 With a computer 6 Click the [Start copying] button. 2 Click on the top right and select the folder with the image data you want to copy to the SD card. 080529_1 ≥A confirmation message appears. Click [Yes] and copying starts. ª Writing back to an SD card ≥Insert an SD card in this unit and format the card. (l 78) (Use an SD card that can be used for motion picture recording.
VQT1Q93_ENG_PP.book 101 ページ 2008年3月6日 木曜日 午後5時42分 With a computer If using Macintosh ≥Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers cannot be used. ≥Apple, Mac OS is either registered trademarks or trademarks of Apple Computer, Inc. in the United States and/or other countries. ≥PowerPC is a trademark of International Business Machines Corporation.
VQT1Q93_ENG_PP.book 102 ページ 2008年3月6日 木曜日 午後5時42分 Others Others Menus and Indications Menu list Recording menus ª [BASIC] [SCENE MODE] (l 61) [D.ZOOM] (l 53) [O.I.S.] (l 55) [GUIDE LINES] (l 56) [CLOCK SET] (l 41) ª [VIDEO] [REC MODE] (l 46) [FADE COLOR] (l 55) [LEVEL METER] (l 60) ª [PICTURE] [PICT.
VQT1Q93_ENG_PP.
VQT1Q93_ENG_PP.book 104 ページ 2008年3月6日 木曜日 午後5時42分 Others Menus related to [ADVANCED] and [SETUP] ≥Underlined items are the initial shipping condition. ª [REC LAMP] ≥[OFF] ª [BEEP SOUND] ≥[OFF] ≥[ON] The recording lamp lights during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording.
VQT1Q93_ENG_PP.
VQT1Q93_ENG_PP.book 106 ページ 2008年3月6日 木曜日 午後5時42分 Others ª Playback indications Motion picture playback 2.1M Number of recording pixels for still pictures 1920k1080 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
VQT1Q93_ENG_PP.book 107 ページ 2008年3月6日 木曜日 午後5時42分 Others Messages CANNOT RECORD. Data writing to the SD card has failed. NO DATA. There are no motion pictures or still pictures recorded on the SD card. If this message appears although data is recorded on the SD card, the condition of the card is probably not stable. Turn off the power and then turn it on again. CANNOT BE USED DUE TO INCOMPATIBLE DATA. The recording format is different so it cannot be used.
VQT1Q93_ENG_PP.book 108 ページ 2008年3月6日 木曜日 午後5時42分 Others CANNOT PROTECT. Scenes on SD cards for which the top menu has been created with HD Writer Ver2.5 cannot be protected. PUSH THE RESET SWITCH. An irregularity in the unit has been detected. Press the RESET button to restart the unit. (l 115) CANNOT SET. The [GUIDE LINES], [ZEBRA], [MF ASSIST] and [LEVEL METER] menu settings cannot be set when the color bar is set. CHANGE MODE TO USE USB. The USB cable is connected in recording mode.
VQT1Q93_ENG_PP.book 109 ページ 2008年3月6日 木曜日 午後5時42分 Others About recovery When the SD card is accessed, you try to playback a scene or faulty control information is read, one of the messages below may be displayed. (Depending on the error, this may take time.) CONTROL DATA ERROR HAS BEEN DETECTED. When connecting to AC adaptor or the remaining capacity of the battery is enough: [FINISHED.] When the remaining capacity of the battery is low: [PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.
VQT1Q93_ENG_PP.book 110 ページ 2008年3月6日 木曜日 午後5時42分 Others Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
VQT1Q93_ENG_PP.book 111 ページ 2008年3月6日 木曜日 午後5時42分 Others Troubleshooting ª Unit operations Problem Check points This unit cannot be turned on. ≥Is the battery fully charged? # Charge it with the AC adaptor. (l 29) ≥The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. This unit is turned off automatically.
VQT1Q93_ENG_PP.book 112 ページ 2008年3月6日 木曜日 午後5時42分 Others Problem This unit cannot be operated though powered up. This unit does not operate normally. Check points ≥Press the RESET button. (l 115) If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again. (Conducting the above operation while the card is being accessed may damage the data on the SD card.
VQT1Q93_ENG_PP.book 113 ページ 2008年3月6日 木曜日 午後5時42分 Others Problem Check points Auto focus function does not work. ≥Is manual focus mode selected? # Set the AUTO/MANUAL/FOCUS switch to AUTO, or press the PUSH AUTO button. ≥Are you trying to record a scene which is hard to bring into focus in auto focus mode? # There are some recording subjects and surroundings for which the auto focus does not operate correctly. (l 118) If so, use the manual focus mode to adjust the focus.
VQT1Q93_ENG_PP.book 114 ページ 2008年3月6日 木曜日 午後5時42分 Others Problem Check points Scenes cannot be deleted. ≥Is the scene on the SD card protected? # Protected scenes cannot be deleted. Release the protect setting. (l 74) ≥Scene which cannot be displayed as thumbnails (the thumbnails are displayed as ) cannot be deleted. If the scenes are unnecessary, format the card to erase the data. (l 78) Please be aware that if a card is formatted then all the data recorded on the card will be erased.
VQT1Q93_ENG_PP.book 115 ページ 2008年3月6日 木曜日 午後5時42分 Others Problem Check points “PUSH THE RESET SWITCH.” is displayed. ≥The unit detects an abnormal condition. Press the RESET button. The unit restarts. ≥If you do not press the RESET button, the power to this unit is turned off automatically about 1 minute later. ≥Even after you press the RESET button, the indication may still appear repeatedly. If so, this unit needs repair.
VQT1Q93_ENG_PP.book 116 ページ 2008年3月6日 木曜日 午後5時42分 Others ª For switching scenes When multiple scenes are played back successively, playback may pause for a period of several frames or for several seconds when switching scenes. ≥Whether successive scenes play back smoothly or not depends on the player. On some players, scenes may pause for a moment even if the following conditions are not applicable. ≥Recording with a different date Images pause for several seconds when the date changes. 2008.1.
VQT1Q93_ENG_PP.book 117 ページ 2008年3月6日 木曜日 午後5時42分 Others ≥When a scene is deleted Example 1: To delete a scene in the middle SCENE1 SCENE2 SCENE3 SCENE1 SCENE2 SCENE4 SCENE4 ... Delete ... Images pause for several seconds where a scene is deleted. Switched scenes without deleting a scene will play back smoothly. Example 2: Recording after deleting the last scene SCENE1 SCENE2 SCENE3 SCENE1 SCENE2 Delete Recording SCENE1 SCENE2 SCENE4 ...
VQT1Q93_ENG_PP.book 118 ページ 2008年3月6日 木曜日 午後5時42分 Others Explanation of terms Automatic white balance White balance adjustment recognizes the color of light and adjusts so the white color will become a purer white. The unit determines the hue of light that comes through the lens and white balance sensor, thereby judging the recording condition, and selects the closest hue setting. This is called automatic white balance adjustment.
VQT1Q93_ENG_PP.book 119 ページ 2008年3月6日 木曜日 午後5時42分 Others Recording a subject behind dirty or dusty window The subject behind the window will not be focused because the focus is on the dirty window. Similarly, when recording something on the opposite side of a road with heavy traffic, a vehicle that happens to pass by may be brought into focus.
VQT1Q93_ENG_PP.book 120 ページ 2008年3月6日 木曜日 午後5時42分 Others Specifications Memory Card Camera-Recorder Power source: Power consumption: DC 7.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 8.5 W indicates safety information. Signal system 1080/60i Recording format AVCHD format compliant Image sensor 1/4-inch 3CCD image sensor Total: 560 Kk3 Effective pixels: Motion picture: 520 Kk3 Still picture: 520 Kk3 Lens Auto Iris, F1.8 to F2.8 Focal length: 4.0 mm to 48.
VQT1Q93_ENG_PP.book 121 ページ 2008年3月6日 木曜日 午後5時42分 Others Component terminal output level Y: 1.0 Vp-p, 75 h PB: 0.7 Vp-p, 75 h PR: 0.7 Vp-p, 75 h HDMI terminal output level HDMI [1125i (1080i)/525p (480p)] Audio output level (Line) 316 mV, 600 h External microphone input Mic sensitivity j70 dBV (3.
VQT1Q93_ENG_PP.book 122 ページ 2008年3月6日 木曜日 午後5時42分 Others Still pictures Recording media SD Memory Card: 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (FAT12 and FAT16 system corresponding) SDHC Memory Card: 4 GB, 8 GB, 16 GB (FAT32 system corresponding) Compression JPEG (Design rule for Camera File system, based on Exif 2.2 standard), DPOF corresponding Picture size 1920k1080 AC adaptor Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 22 W DC 7.3 V, 1.
VQT1Q93_ENG_PP.book 123 ページ 2008年3月6日 木曜日 午後5時42分 Others Index Others ª A AC adaptor ..............................................11, 29, 32 Aperture ..............................................................64 Auto focus .........................................................118 Automatic white balance .............................63, 118 AVCHD ...............................................................14 ª N Number of Recordable Pictures on an SD Card ....................................
VQT1Q93_ENG_PP.book 128 ページ 2008年3月6日 木曜日 午後5時42分 Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.