AJ-HPX3700G-VQT1V68_eng.book 1 ページ 2008年10月15日 水曜日 午後6時38分 This product is eligible for the P2HD 5 Year Warranty Repair Program. For details, see page 7. Operating Instructions Memory Card Camera-Recorder Model No. AJ-HPX3700G Before operating this product, please read the instructions carefully and save this manual for future use.
AJ-HPX3700G-VQT1V68_eng.book 2 ページ 2008年10月15日 水曜日 午後6時38分 Read this first! Declaration of Conformity CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
AJ-HPX3700G-VQT1V68_eng.book 3 ページ 2008年10月15日 水曜日 午後6時38分 A rechargeable battery that is recyclable powers the product you have purchased. This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material — special handling may apply. See www.dtsc.ca/gov/hazardouswaste.perchlorate. Caution regarding laser beams The CCD may be damaged if it is subjected to light from a laser beam.
AJ-HPX3700G-VQT1V68_eng.book 4 ページ 2008年10月15日 水曜日 午後6時38分 EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1. Applicable standards and operating environment The apparatus is compliant with: standards EN55103-1 and EN550103-2 1996.and electromagnetic environments E1, E2, E3, E4 and E5. 2.
AJ-HPX3700G-VQT1V68_eng.book 5 ページ 2008年10月15日 水曜日 午後6時38分 Contents Read this first! .......................................................................................... 2 General Features of Camera unit .......................................................................... 9 Features of Recorder/Player unit ........................................................... 10 Features of the Input/Output unit ........................................................... 12 Other features ..............
AJ-HPX3700G-VQT1V68_eng.book 6 ページ 2008年10月15日 水曜日 午後6時38分 Adjusting the White balance and Black Balance.................................... 52 Setting the Electronic Shutter ................................................................ 56 Assigning Functions to User Buttons ..................................................... 59 Selecting Audio Input Signals and Adjusting Recording Levels............. 61 Setting Time Data ...............................................................................
AJ-HPX3700G-VQT1V68_eng.book 7 ページ 2008年10月15日 水曜日 午後6時38分 Formatting a P2 Card .......................................................................... 140 Formatting SD memory cards .............................................................. 141 Setting the Thumbnail Display Mode ................................................... 142 Properties ............................................................................................
AJ-HPX3700G-VQT1V68_eng.book 8 ページ 2008年10月15日 水曜日 午後6時38分 General Attention Adjust the following 2 settings when using the unit for the first time. Adjust the black-balance setting when using the unit for the first time. (Refer to page 55) The unit is delivered from the factory with the color TV standard not yet specified. To revise the settings for frame frequency according to the TV standard, refer to the procedures described on page 14. This unit is a CCD camcorder with a camera unit equipped with 2.
AJ-HPX3700G-VQT1V68_eng.book 9 ページ 2008年10月15日 水曜日 午後6時38分 Features of Camera unit Multi-format Various image formats are realized by switching the 2.2 Megapixel 2/3 inch 3 CCD between the interlace drive and the progressive drive. Chromatic Aberration Compensation function Scan Reverse function The Scan Reverse function, as standard configuration, cancels the image inversion that occurs when a lens adapter from Canon or Angenieux is used, and it can be switched through the menu settings.
AJ-HPX3700G-VQT1V68_eng.book 10 ページ 2008年10月15日 水曜日 午後6時38分 Features of Recorder/Player unit Multiple Slots The unit is equipped with 5 slots for P2 cards. Up to 5 cards may be inserted in these slots for continuous recording. They also provide new recording capabilities specific to memory cards. Hot-Swap recording The Hot-Swap capability allows cards not in use to be replaced without interrupting recording. This facilitates continuous recording.
AJ-HPX3700G-VQT1V68_eng.book 11 ページ 2008年10月15日 水曜日 午後6時38分 Text memos & Shot marks Each clip can incorporate comments, in the form of text memo added to the thumbnail associated with the time code, together with shot marks which, for example, can help you distinguish OK cuts from reject cuts. Both text memos and shot marks can be added to selected clips during and after a recording. This is helpful for editing recorded video.
AJ-HPX3700G-VQT1V68_eng.book 12 ページ 2008年10月15日 水曜日 午後6時38分 Approximate Proxy Recording Time (optional) on SD memory cards (Except for 24P native mode) Card No. (Card Capacity) MPEG4 recording rate (Reference values when Panasonic bland SD memory cards or SDHC memory cards are used for continuous recording. Actual recording time depends on the kind of scenes and the number of clips.) 192 kbps 768 kbps 1500 kbps RP-SDH256 (256 MB) Approx. 2 h 17 min Approx. 35 min Approx.
AJ-HPX3700G-VQT1V68_eng.book 13 ページ 2008年10月15日 水曜日 午後6時38分 Dimensions drawing Unit: mm (inch) 137 (5- 3 / 8 ) 318 (12- 1 / 2) 270.
AJ-HPX3700G-VQT1V68_eng.book 14 ページ 2008年10月15日 水曜日 午後6時38分 Color TV Standard Settings (Settings for frame frequency) The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the preferred standard, refer to the procedures described below. 1 2 After connecting the unit to the power supply and then turning on the power, press the MENU button while pressing the LIGHT button to open OPTION MENU.
AJ-HPX3700G-VQT1V68_eng.
AJ-HPX3700G-VQT1V68_eng.book 16 ページ 2008年10月15日 水曜日 午後6時38分 Parts and their Functions Power Supply and Accessory Mounting Section 5 11 16 6 7 6 2 9 8 10 1 4 3 15 1. POWER switch Used to turn on/off the power. 2. Battery mount A battery pack from Anton/Bauer is mounted here. 14 12 13 10. Lens mount cap To remove the cap, raise the 9. Lens lever. When the lens is not mounted, replace the cap. 11. Light cable clamp Secures the light cable. 3.
AJ-HPX3700G-VQT1V68_eng.book 17 ページ 2008年10月15日 水曜日 午後6時38分 Audio (input) Function Section 13 12 14 11 10 3 7 6 1 1. MIC IN (microphone input) jack (XLR, 5-pin) A microphone (optional) is connected here. Power can be supplied via this jack to allow use of a phantom microphone. Note that the FRONT MIC POWER menu option must be set to “ON” when using a phantom microphone. These options are found in the screen on the MAIN OPERATION page. 2.
AJ-HPX3700G-VQT1V68_eng.book 18 ページ 2008年10月15日 水曜日 午後6時38分 Audio (output) Function Section 9. AUDIO OUT connector (XLR, 5-pin) This connector outputs audio signals recorded on Channels 1/2 or 3/4. Output signals are selected with the 10. MONITOR SELECT CH1/2 / CH3/4 selector switch. 10. MONITOR SELECT (audio channel selection) CH1/2 / CH3/4 selector switch Use this switch to select the audio channel whose signals are output to the speakers, earphones or AUDIO OUT connector.
AJ-HPX3700G-VQT1V68_eng.book 19 ページ 2008年10月15日 水曜日 午後6時38分 Shooting and Recording/Playback Functions Section 10 9 8 31 20 21 22 23 1 24 15 25 2 26 27 3 11 17 30 4 12 14 5 6 7 13 16 19 1. CC/ND FILTER (filter switching) controls These are used to select the filter in accordance with the subject’s brightness and color temperature.
AJ-HPX3700G-VQT1V68_eng.book 20 ページ 2008年10月15日 水曜日 午後6時38分 5. GAIN selector switch Use this switch to select video amplifier gain, according to lighting conditions under which you are shooting. The values for [L], [M], and [H] can be preset using menu options. These are factory-set to “0 dB” for [L], “3 dB” for [M], and “6 dB” for [H]. 6. OUTPUT/AUTO KNEE selector switch Used to select the video signals sent from the camera unit to the memory, viewfinder and video monitor.
AJ-HPX3700G-VQT1V68_eng.book 21 ページ 2008年10月15日 水曜日 午後6時38分 10 9 8 31 20 21 22 23 33 32 1 24 15 25 26 27 3 11 17 30 4 12 14 5 6 7 13 16 19 13. TEXT MEMO button 16. MON OUT CHARACTER switch Records a text memo if pressed during recording or playback or when playback is paused. Also, with appropriate menu settings, the TEXT MEMO button can be used as a USER 4 button. For more information on user buttons, refer to [Assigning Functions to User Buttons] (page 59) 14.
AJ-HPX3700G-VQT1V68_eng.book 22 ページ 2008年10月15日 水曜日 午後6時38分 19. MON OUT SEL (output signal selection) switch Used to switch the signals output from the MON OUT connector. MEM: CAM: OFF: Video from the camera is output during recording or when recording is paused or playback signals are output from the P2 card during playback. Video from the camera is output constantly. Video is not output, and the unit operates in power-saving mode. Note that the audio output is synchronized with the video.
AJ-HPX3700G-VQT1V68_eng.book 23 ページ 2008年10月15日 水曜日 午後6時38分 32. SD memory card insertion slot An SD memory card (optional) is inserted here. SD memory cards are used for recording and accessing the menu settings of cameras and the lens files, uploading metadata, and proxy recording (optional).
AJ-HPX3700G-VQT1V68_eng.book 24 ページ 2008年10月15日 水曜日 午後6時38分 Menu Operation Section 1. MENU button Used to turn on/off the menu. 2. SELECT (Jog dial) button With the menu open, this button is used to navigate through menu pages, select options and specify values. For directions on manipulating the menu, see [Menu Configuration] (page 166). 4 3 3. SD memory card insertion slot 5 4. Busy (operation mode display) lamp An SD memory card (optional) is inserted here.
AJ-HPX3700G-VQT1V68_eng.book 25 ページ 2008年10月15日 水曜日 午後6時38分 Time Code Section 4 5 6 1 3 2 1. GENLOCK IN connector (BNC) This connector is used to input a reference signal before the camera unit is gen-locked, or before the time code is externally locked. 2. TC IN connector (BNC) This connector is used to input a reference time code when you externally lock the time code. 3.
AJ-HPX3700G-VQT1V68_eng.book 26 ページ 2008年10月15日 水曜日 午後6時38分 Warning and Status Display Functions 7. Display window This window displays warnings, battery-remaining level, sound volume, time data, and other information. 1 2 Note 6 7 When the battery is installed, the unit indicates the data even if the power is turned off. To turn off the data indications to keep the battery from being discharged, specify “OFF” for the menu option P.
AJ-HPX3700G-VQT1V68_eng.book 27 ページ 2008年10月15日 水曜日 午後6時38分 Display Window Functions P2 card/battery-remaining level and audio level indications f NDF SLAVE HOLD HD GPS CTL VTCG TIME DATE P-iREC OVER OVER 0 g 10 NDF SLAVE HOLD HD GPS CTL VTCG TIME DATE P-iREC OVER OVER 0 h Y 10 a b MEDIA BATT minM s D frm c 20 E F E F 30 40 OO LOOP 13 OP-SLOT -dB 24 a. Media-remaining space indication bar The bar indicates the remaining free space on each P2 card, using a 7-segment display.
AJ-HPX3700G-VQT1V68_eng.book 28 ページ 2008年10月15日 水曜日 午後6時38分 Positions of time code-related switches and information provided Position of DISPLAY switch CTL Position of TCG switch Information Item SET Time code F-RUN or R-RUN TC CTL Time code F-RUN/SET/ R-RUN UB User bits or realtime, time zone LCD Monitor 5. Cursor and SET buttons The 4 triangular buttons are the cursor buttons, and the center rectangular one is the SET button.
AJ-HPX3700G-VQT1V68_eng.book 29 ページ 2008年10月15日 水曜日 午後6時38分 Viewfinder You can use the following viewfinder (optional) on the unit: HD Viewfinder: AJ-HVF21G (selectable between 59.94 and 50 Hz) 13 7. Front tally lamp 14 11 7 9 10 1 8. Back tally lamp 8 4 5 2 3 6 1. Viewfinder (optional) During recording or playback, the viewfinder displays the video image in monochrome. It also displays warnings, messages, zebra patterns, markers (safety zone and center markers), etc. 2.
AJ-HPX3700G-VQT1V68_eng.book 30 ページ 2008年10月15日 水曜日 午後6時38分 16 15 15. Viewfinder left-right position anchoring ring Used to adjust the side-to-side position of the viewfinder. 16. Viewfinder front-back position anchoring lever Used to adjust the fore-and-aft position of the viewfinder. Note For more information, see the instruction manual for the viewfinder.
AJ-HPX3700G-VQT1V68_eng.book 31 ページ 2008年10月15日 水曜日 午後6時38分 Recording and Playback P2 Cards 3 Inserting P2 Cards Insert a P2 card into the P2 card slot until the eject button pops up. Note When using the unit for the first time, be sure to set the time data beforehand. On how the time data is set, see [Setting Time Data] (page 63). d Turn on the POWER switch. e Recording and Playback 1 d. Eject button e. The card must be inserted with the logo right way up.
AJ-HPX3700G-VQT1V68_eng.book 32 ページ 2008年10月15日 水曜日 午後6時38分 Removing P2 Cards 1 2 3 While pressing down the slide lock button, move the slide-out door to the left. The door opens. Tilt down the eject button. Then, depress the eject button to release the P2 card so that you can remove it. The P2 card access LEDs may be set to stay off using the menu option ACCESS LED. This option can be found on the
AJ-HPX3700G-VQT1V68_eng.book 33 ページ 2008年10月15日 水曜日 午後6時38分 How to handle data recorded on P2 cards The P2 card is a semiconductor memory card that is used as the recording medium in the professional video production and broadcasting devices that make up the DVCPRO P2 Series. Since data recorded in the DVCPRO P2 format or AVCIntra are in a file format, they have excellent compatibility with PCs.
AJ-HPX3700G-VQT1V68_eng.book 34 ページ 2008年10月15日 水曜日 午後6時38分 Basic Procedures This section describes the basic procedure for shooting and recording. Before you embark on a shoot, pre-inspect your system to ensure that it works properly. * For directions on inspecting your unit, see [Inspections Before Shooting] (page 153). Battery Set-up to P2 card Insertion 1 2 3 Note When “SLOT1” is selected for the menu option P.
AJ-HPX3700G-VQT1V68_eng.book 35 ページ 2008年10月15日 水曜日 午後6時38分 White/Black Balance Adjustment to Recording Completion For shooting, follow the steps below. 1 2 White/Black balance adjustment to recording completion Select a filter according to light conditions. When the white balance is saved: Position the WHITE BAL switch to [A] or [B]. If the white balance is adjusted on the spot: Position the WHITE BAL switch to [A] or [B] and shoot a white test subject so that it appears at the center of the screen.
AJ-HPX3700G-VQT1V68_eng.book 36 ページ 2008年10月15日 水曜日 午後6時38分 Normal Recording REC START button or VTR button at the lens starts recording of video and sound on the P2 card. A cluster of data that consists of video and sound generated through a shooting action, together with such added information as meta data, is called a “clip”.
AJ-HPX3700G-VQT1V68_eng.book 37 ページ 2008年10月15日 水曜日 午後6時38分 PRE RECORDING function The function of the menu option PRE REC MODE may be assigned to a desired user button by using any one of the menu options USER MAIN SW, USER1 SW, USER2 SW, MARKER SEL, or TEXT MEMO SW. These options can be found in the screen on the CAM OPERATION page. The following is the option for PRE REC TIME.
AJ-HPX3700G-VQT1V68_eng.book 38 ページ 2008年10月15日 水曜日 午後6時38分 Variable Frame Rate (VFR) Recording Function This unit can shoot at a lower frame rate (undercrank) or higher frame rate (overcrank). For native VFR recording (1080/23.98PsF (24PsF)) 1 2 Open the screen from the SYSTEM SETTING page using the menu. Set SYSTEM MODE to “1080-23.98PsF (24PsF)”, REC FORMAT to “AVC-I 100 (50)/24PN”, and VFR to “ON”. Set FRAME RATE suitable for desired way of shooting.
AJ-HPX3700G-VQT1V68_eng.book 39 ページ 2008年10月15日 水曜日 午後6時38分 To change the frame rate while recording in VFR It is possible to change the frame rate while recording in VFR. 1 2 Open the
AJ-HPX3700G-VQT1V68_eng.book 40 ページ 2008年10月15日 水曜日 午後6時38分 Flow Effect Shooting 2 This way of shooting provides a flow effect and may, for instance, be used to shoot a subject on a far side of a road with a stream of fast-moving cars as the flow, in such a way that the stationary subject comes into focus though the cars. 1 Press the REC START button to begin recording in the VFR mode.
AJ-HPX3700G-VQT1V68_eng.book 41 ページ 2008年10月15日 水曜日 午後6時38分 Practical Use of Other VFR Recording Functions Standard Speed Shooting for Film Production When producing for the cinema screen, a frame rate of 24 fps (24 frames per sec) matching the rate at which films are played back is normal (1 speed). When settings below are used, the recorded material will play back as a film. Images like a film can be obtained by FILMLIKE1-3 and FILM-REC gamma.
AJ-HPX3700G-VQT1V68_eng.book 42 ページ 2008年10月15日 水曜日 午後6時38分 Undercrank Shooting This way of shooting provides the quick motion effects used, for instance to realize speeding clouds, a person standing stationary in the blur of a moving crowd, and kung-fu moves. For example, when the scenes have been shot using the 24P recording format for specifying playback frames, the speed of the quick motion effects can be doubled by setting the VFR recording frame rate to 12 fps.
AJ-HPX3700G-VQT1V68_eng.book 43 ページ 2008年10月15日 水曜日 午後6時38分 Loop Recording When two or more P2 card slots contain cards, this function allows the target P2 card to be switched in order. Even when the free space of a P2 card is used up, this function continues recording while erasing existing data. Card1 Before loop recording starts No content To use this function, the menu option LOOP REC MODE must be set to “ON”.
AJ-HPX3700G-VQT1V68_eng.book 44 ページ 2008年10月15日 水曜日 午後6時38分 Interval Recording It is possible to record in intervals of one frame as the shortest length by using the internal memory of the unit. To use this option, open the screen from the SYSTEM SETTING page, and set the interval recording mode, REC TIME, PAUSE TIME and TAKE TOTAL TIME for the menu option INTERVAL REC MODE. When the settings are finalized, TOTAL REC TIME needed on the P2 card is automatically calculated and displayed.
AJ-HPX3700G-VQT1V68_eng.book 45 ページ 2008年10月15日 水曜日 午後6時38分 For continuous recording To stop the Interval recording mode Press either the REC START button or VTR button at the lens, again. Interval recording resumes. Setting the menu option INTERVAL REC MODE to “OFF”. To stop recording Press the STOP button. Recording stops. Then, the camera accesses the P2 card to record the video stored in memory before recording stops.
AJ-HPX3700G-VQT1V68_eng.book 46 ページ 2008年10月15日 水曜日 午後6時38分 During INTERVAL REC mode general notes Sound By selecting “ON”/“OFF” for the menu option AUDIO REC in the screen, it is possible to specify whether or not sound will be recorded during interval recording. Record/playback buttons During interval recording, all operation buttons other than STOP (REW, FF, PLAY/PAUSE) are disabled. However, during a pause in ONE SHOT mode, REC REVIEW can be executed with the RET button on the lens.
AJ-HPX3700G-VQT1V68_eng.book 47 ページ 2008年10月15日 水曜日 午後6時38分 Normal and Variable Speed Playback The PLAY/PAUSE button provides monochrome playback through the viewfinder and color playback on the LCD monitor. A color video monitor connected to the HD SDI A · B or MON OUT connector of unit also provides color playback. The HD SDI A · B connector outputs an SDI playback (to view the playback, the HD SDI A · B switch on the side panel must be positioned to [MEM]).
AJ-HPX3700G-VQT1V68_eng.book 48 ページ 2008年10月15日 水曜日 午後6時38分 Shot Mark Function A shot mark is added to the thumbnail of a clip to distinguish that clip from others. It is also possible to select only those clips which include shot marks, and display and playback the selected clips on the LCD monitor. Shot marks may also be added or erased using clip thumbnails. For more information, see [Shot Mark] (page 132).
AJ-HPX3700G-VQT1V68_eng.book 49 ページ 2008年10月15日 水曜日 午後6時38分 Adjustments and Settings for Recording Multi Format Video system and Recording format For the unit to obtain image signals for each HD format, CCD is switching between interlaced scan and progressive scan (reading all pixels). With combinations of the SYSTEM MODE and CAMERA MODE menu options on the screen on the SYSTEM SETTING page, you can select an video system from among 13 types.
AJ-HPX3700G-VQT1V68_eng.book 50 ページ 2008年10月15日 水曜日 午後6時38分 Recording formats and output connector signal formats The table below shows the formats used to record signals from the CCD and externally input signals along with the formats for signals output from the output connectors. Menu setting SYSTEM REC FORMAT MODE CAMERA MODE Operating state VFR OFF 60i DVCPROHD/60i 30P 24P 108059.
AJ-HPX3700G-VQT1V68_eng.book 51 ページ 2008年10月15日 水曜日 午後6時38分 Menu setting SYSTEM MODE REC FORMAT CAMERA MODE 1080-59.
AJ-HPX3700G-VQT1V68_eng.book 52 ページ 2008年10月15日 水曜日 午後6時38分 Adjusting the White balance and Black Balance To record high-quality video with the unit, the black and white balances must be adjusted according to conditions. For higher quality, it is recommended that the adjustments should be made in this order AWB (white balance adjustment) ABB (black balance adjustment) AWB (white balance adjustment). Adjusting the White Balance Whenever light conditions change, the white balance must be re-adjusted.
AJ-HPX3700G-VQT1V68_eng.book 53 ページ 2008年10月15日 水曜日 午後6時38分 Detection area for the white balance Retaining white balances The detection area for the white balance is selectable between “90%”, “50%” and “25%”, using the menu option AWB AREA. This option can be found in the screen on the CAM OPERATION page. The detection area is factory-set to “25%”. 90% 50% When you have no time to adjust the white balance Position the WHITE BAL switch at [PRST].
AJ-HPX3700G-VQT1V68_eng.book 54 ページ 2008年10月15日 水曜日 午後6時38分 Setting Color Temperature Manually The white balance can be manually adjusted by setting the color temperature. Manual color temperature settings can be performed for each of the WHITE BAL switch positions: [PRST], [A] and [B]. The color temperature is set using the menu options COLOR TEMP PRE, COLOR TEMP A, and COLOR TEMP B. These options can be found in the screen on the CAM OPERATION page.
AJ-HPX3700G-VQT1V68_eng.book 55 ページ 2008年10月15日 水曜日 午後6時38分 Adjusting the Black Balance The black balance must be adjusted when: You use your unit the first time. Your unit has not been used for some time. The ambient temperature has changed substantially. The gain switchover value has been changed. SYSTEM MODE has been changed. 1 Set the switches as illustrated below. b a. AUTO W/B BAL switch: Used to perform ABB. b.
AJ-HPX3700G-VQT1V68_eng.book 56 ページ 2008年10月15日 水曜日 午後6時38分 Setting the Electronic Shutter This section provides a description of the electronic shutter, together with setting and handling directions. Shutter Modes The table below lists the shutter modes in which the unit’s electronic shutter can be used as well as the shutter speeds which can be selected.
AJ-HPX3700G-VQT1V68_eng.book 57 ページ 2008年10月15日 水曜日 午後6時38分 Setting the Shutter Mode and Speed The shutter speed in any shutter mode is set using the SHUTTER switch. In SYNCHRO SCAN/SYNCHRO SCAN2 mode, shutter speed can be switched easily, using the SYNCHRO SCAN adjustment buttons (+/–) on the side panel. Note that the range of selectable shutter speeds may be predefined; whether or not to use the SYNCHRO SCAN mode may be determined through the and screens.
AJ-HPX3700G-VQT1V68_eng.book 58 ページ 2008年10月15日 水曜日 午後6時38分 Placing the Unit in SYNCHRO SCAN Mode To place the unit in SYNCHRO SCAN mode, follow the steps below. 1 2 Press the SHUTTER switch positioned at [ON] towards [SEL], to place the unit in SYNCHRO SCAN mode or SYNCHRO SCAN2 mode. In the SYNCHRO SCAN mode, it is possible to change the shutter speed continuously by operating the SYNCHRO SCAN (+/–) adjustment buttons. a b a. SYNCHRO SCAN adjustment buttons (+/–) b.
AJ-HPX3700G-VQT1V68_eng.book 59 ページ 2008年10月15日 水曜日 午後6時38分 Assigning Functions to User Buttons The USER MAIN, USER 1, USER 2, MARKER SELECT and TEXT MEMO buttons can be assigned user-selected functions. To select desired functions, use the menu options which can be found in the screen on the CAM OPERATION page. differences in color development when the DRS function is turned on/off.
AJ-HPX3700G-VQT1V68_eng.book 60 ページ 2008年10月15日 水曜日 午後6時38分 AUDIO CH1: Function of switching the input signal source for audio channel 1 assigned. Pressing the button switches the input signal in the following order: FRONT W.L. REAR. Note that the AUDIO IN switch can also be used to change the input signal: later specification takes precedence. AUDIO CH2: Function of switching the input signal source for audio channel 2 assigned.
AJ-HPX3700G-VQT1V68_eng.book 61 ページ 2008年10月15日 水曜日 午後6時38分 Selecting Audio Input Signals and Adjusting Recording Levels This unit is capable of recording 4 independent audio channels in all recording formats except for native recording with VFR. When the AUDIO SELECT CH1/CH2 switch is positioned at [AUTO], the recording levels for audio channels 1 and 2 are automatically adjusted. To manually adjust the recording levels, position the switch at [MAN].
AJ-HPX3700G-VQT1V68_eng.book 62 ページ 2008年10月15日 水曜日 午後6時38分 Adjusting Recording Levels To adjust the recording levels for audio channels 1 and 2, follow the steps below. 1 Position the MONITOR SELECT CH1/2 / CH3/4selector switch at [CH1/2] so that the audio level meter on the display window will provide CH1 and CH2 indications. Ensure that the channel indications displayed in the window are “1” and “2”.
AJ-HPX3700G-VQT1V68_eng.book 63 ページ 2008年10月15日 水曜日 午後6時38分 Setting Time Data The unit supports time codes, user bits, date, and time (real time) data, which are recorded as data for the sub-code area, VIDEO AUX area, and clip metadata files. It also includes a CTL counter and camera ID. Description of time data Time code Note The CTL counter will measure total recording time after resetting in the recording operation.
AJ-HPX3700G-VQT1V68_eng.book 64 ページ 2008年10月15日 水曜日 午後6時38分 Recording time code and user bits The following shows recording time codes and user bits for different input signal formats, and SYSTEM MODE and CAMERA MODE settings. System setting CAMERA SYSTEM REC FORMAT MODE MODE VFR OFF 60i DVCPROHD/ 60i 108059.94i AVC-I 100/60i AVC-I 50/60i Disabled 59.94i 1-30FRAME 59.94i (Over 59.94i) 24P Fixed Disabled to OFF 23.98P (Over 59.94i) 24PA Fixed Disabled to OFF 23.98PA (Over 59.
AJ-HPX3700G-VQT1V68_eng.book 65 ページ 2008年10月15日 水曜日 午後6時38分 Setting of the user bits The user bits (UB) to be recorded in the sub-code area are selected through the menu option UB MODE. The user bits (VITC UB) to be recorded in the VIDEO AUX area are selected through the menu option VITC UB MODE. a b c d e a. b. c. d. e. 1 2 3 HOLD switch DISPLAY switch Display window TCG switch Cursor and SET buttons Adjustments and Settings for Recording USER (UB MODE only) The included user value is recorded.
AJ-HPX3700G-VQT1V68_eng.book 66 ページ 2008年10月15日 水曜日 午後6時38分 Retaining the user bits For 1080i The data set for the user bits are automatically saved and retained even if the unit is turned off.
AJ-HPX3700G-VQT1V68_eng.book 67 ページ 2008年10月15日 水曜日 午後6時38分 Setting the Internal Clock’s Date and Time 1 2 3 4 6 7 8 Press the HOLD button to display DATE in the display window. Time difference Area 00:00 Greenwich Time difference Area –12:00 Kwajalein +00:30 –11:30 +01:00 Central Europe –11:00 Midway Island +01:30 –10:30 Use the cursor and SET buttons to set the year, month and day (Y/M/D). Note that any later than 2030 cannot be set.
AJ-HPX3700G-VQT1V68_eng.book 68 ページ 2008年10月15日 水曜日 午後6時38分 Setting the Time Code 1 2 3 Position the DISPLAY switch at [TC]. Position the TCG switch at [SET]. Set the menu option TC MODE to “DF” or “NDF”. “DF” steps the time code in drop frame mode, and “NDF” steps it in non-drop frame mode. However, the camera always operates in “NDF” for 24P, 24PA and 24PN (Native) modes. The menu option TC MODE can be found in the screen on the MAIN OPERATION page.
AJ-HPX3700G-VQT1V68_eng.book 69 ページ 2008年10月15日 水曜日 午後6時38分 Externally Locking the Time Code The unit’s internal time code generator can be locked to an external generator. In addition, the external time code generator can be locked to the unit’s internal generator. Example of connections for external locking As the figure shows, connect both the reference video signal and reference time code.
AJ-HPX3700G-VQT1V68_eng.book 70 ページ 2008年10月15日 水曜日 午後6時38分 As a result of processing to convert the video captured by the imaging devices from a progressive signal to an interlace signal, video signal delays will occur in the camera. Since time is required for making the 2:3 pull-down from the 24P frame, there is a video signal delay in the camera. When recording from a device that can record images without a delay and the unit is connected in parallel, it is necessary to synchronize the time code.
AJ-HPX3700G-VQT1V68_eng.book 71 ページ 2008年10月15日 水曜日 午後6時38分 Example 5: When an external device is locked to the time code generator of the unit. Example 6: When an external device is locked to the time code generator of unit, which is connected in a cascade configuration.
AJ-HPX3700G-VQT1V68_eng.book 72 ページ 2008年10月15日 水曜日 午後6時38分 To externally lock the time code Follow the steps below. 1 2 3 4 5 Turn on the POWER switch. Position the TCG switch at [F-RUN]. Position the DISPLAY switch at [TC]. Set the menu option GENLOCK to “EXT”. This option can be found in the screen on the SYSTEM SETTING page.
AJ-HPX3700G-VQT1V68_eng.book 73 ページ 2008年10月15日 水曜日 午後6時38分 Providing an ID to the Camera The camera ID is specified through the screen. The ID can include up to 10 alphanumeric characters, symbols, and/or spaces. Note When the settings menu is displayed, outputting color bar signals does not indicate the camera ID. 1 Go to the screen from the CAM OPERATION page.
AJ-HPX3700G-VQT1V68_eng.book 74 ページ 2008年10月15日 水曜日 午後6時38分 Setting UMID Information The unit supports UMID metadata. You need to specify as UMID information the country where you live (using up to 3 characters), organization or company (up to 4 characters) and user name (up to 4 characters). For the country name, you must use abbreviations prescribed in the ISO3166 Country Code*. Here are some examples of the correct method for specifying a user name: * Examples: China U.S.A.
AJ-HPX3700G-VQT1V68_eng.book 75 ページ 2008年10月15日 水曜日 午後6時38分 CTL Count Setting and Display By setting the DISPLAY switch to [CTL], CTL count is displayed on the time count indication of the LCD display window. The CTL count is displayed in ±12 hours with non-dropframe. The playback order of clips recorded on a P2 card is not linear as for VTRs. It is organized according to thumbnail operations or exchanging P2 cards, and the priority of recorded clips will be altered.
AJ-HPX3700G-VQT1V68_eng.book 76 ページ 2008年10月15日 水曜日 午後6時38分 Viewfinder Screen Status Displays In addition to video images, the viewfinder displays lamps and text that indicate the settings and operating status of the unit, together with messages, a center marker, a safety zone marker and the camera ID. Lamps in the Viewfinder Screen 2. Abnormal Operating Status Warning Lamp 1 This lamp comes on when the unit is in any of the abnormal operating statuses specified through the menu screen.
AJ-HPX3700G-VQT1V68_eng.book 77 ページ 2008年10月15日 水曜日 午後6時38分 Y GET Area Display Y GET detection area is displayed on the viewfinder screen, LCD monitor, and monitor output when the Y GET function is enabled after assigning the Y GET function to the USER button. However, Y GET detection area is not displayed in the monitor output unless the center marker is displayed. a b Adjustments and Settings for Recording a. Center marker b.
AJ-HPX3700G-VQT1V68_eng.book 78 ページ 2008年10月15日 水曜日 午後6時38分 Information Item Indication 1. System mode 1080-59.9i 1080-23.9PsF 1080-24.0PsF 1080-50i 2/42. Frame number for shooting and recording P: i At native recording P: PN 3. REC FORMAT DVCPROHD AVC-I100 AVC-I50 4/40. Shutter speed/ mode X1/ . ,X . d XX1/ . 1/50 (1/60) - 1/2000, HALF, . d 5. P2 card remaining free space min This indicates the recording mode. Note “DVCPROHD” is also displayed in the native recording.
AJ-HPX3700G-VQT1V68_eng.book 79 ページ 2008年10月15日 水曜日 午後6時38分 Information Item 8. Battery type (when MODE CHECK is being performed) 9. Battery remaining level/voltage Indication PRO14 - AC ADPT . V % Battery remaining level in tenths of a volt The battery level of batteries having a level indicating function is displayed as a percentage. Where the battery has a level indicating function, this indicates that the battery is empty.
AJ-HPX3700G-VQT1V68_eng.book 80 ページ Information Item 2008年10月15日 水曜日 午後6時38分 Indication 11. Camera Warning AWB A ACTIVE and Report Area AWB B ACTIVE AWB A OK . K (Related to AWB, ABB AWB B OK . K and switch settings) AWB BREAK . K AWB NG COLOR TEMP LOW COLOR TEMP HIGH LEVEL OVER LOW LIGHT TIME OVER AWB PRESET . K CHECK FILTER ABB ACTIVE ABB OK ABB BREAK ABB NG B-SHD READY B-SHD ACTIVE B-SHD OK B-SHD BREAK B-SHD NG (Switch changeover indication) (Low light warning) (Y GET value) 12.
AJ-HPX3700G-VQT1V68_eng.book 81 ページ 2008年10月15日 水曜日 午後6時38分 Information Item 13. System information and warnings Indication Status SYSTEM ERROR- Something abnormal is happening to the internal computer communications or reference signal. No further recording or playback can be performed. is replaced with an error code. For more information, see [Error Codes] (page 163).
AJ-HPX3700G-VQT1V68_eng.book 82 ページ 2008年10月15日 水曜日 午後6時38分 Information Item 14. 82 Time code indication Indication TCG TCR (V)UBG (V)UBR CTL 12:59:59:20 12:59:59:20 AB CD EF 00 12 34 56 78 –1:59:59:20 Status TCG (time code generator value) TCR (time code reader value) UBG VUBG (User bits generator value) UBR VUBR (User bits reader value) Displays CTL count. 15. CAC CAC 16. Extender EX This is displayed when CAC is operating normally. 17/39. Color temperature 18/38.
AJ-HPX3700G-VQT1V68_eng.book 83 ページ 2008年10月15日 水曜日 午後6時38分 Information Item Indication Status 26. Iris, F value NC OPEN F1.7 - F16 CLOSE Lens cable is not connected. Lens iris is at maximum. Lens iris value Lens iris closed. Note These indications are provided when the lens is capable of indicating the iris value. When the iris is being overridden, they blink. 27. Zoom indication Z00 - Z99 Zoom degree is indicated.
AJ-HPX3700G-VQT1V68_eng.book 84 ページ 2008年10月15日 水曜日 午後6時38分 Information Item Indication Status 35. B.GAMMA RANGE 1 2 3 This indicates the level (upper limit) of the compression/expansion. 36. Switch lock setting !SW LOCK This is displayed when any of the side switches (GAIN, OUTPUT and AWB switches) are operated with SIDE SW LOCK in a locked state. Note that it is not displayed during when AJ-RC10G is connected and in operation. 37.
AJ-HPX3700G-VQT1V68_eng.book 85 ページ 2008年10月15日 水曜日 午後6時38分 Indications Available in the Viewfinder Screen Selectable between on and off through menu options Provided when the appropriate status is encountered. Provided during MODE CHECK* Can be switched off. Provided during playback 1. System mode – – 2. Frame number for shooting and recording – – 3. REC FORMAT – – 4. Shutter speed/mode 5. P2 card remaining free space 6.
AJ-HPX3700G-VQT1V68_eng.book 86 ページ 2008年10月15日 水曜日 午後6時38分 Display Modes and Setting Changes/adjustment Result Messages The messages that appear on the viewfinder screen to indicate changes to settings and adjustment results may be limited, or set not to appear, through the menu option DISP MODE. This menu option can be found in the screen on the VF page. For directions on navigating the menu, see [Setting Menu Options] (page 168).
AJ-HPX3700G-VQT1V68_eng.book 87 ページ 2008年10月15日 水曜日 午後6時38分 Marker Check Screen Displays (MARKER SELECT button function) The viewfinder can display a screen that allows you to view the marker settings of the unit. Pressing the MARKER SELECT button on the unit switches the marker indication as follows.
AJ-HPX3700G-VQT1V68_eng.book 88 ページ 2008年10月15日 水曜日 午後6時38分 Adjusting and setting the LCD monitor 5 Using the LCD Monitor 1 2 Turn on the POWER switch of the unit. Slide the OPEN button in the arrow 1 direction to open the LCD monitor in the arrow 2 direction. Through the menu option VF/LCD CHAR, specify whether or not the LCD should display the same characters as the viewfinder. This menu option can be found in the
AJ-HPX3700G-VQT1V68_eng.book 89 ページ 2008年10月15日 水曜日 午後6時38分 Selection of video output signals The unit employs the HD SDI A · B connector and the MON OUT connector as connectors for outputting video signals. Settings of signals output from HD SDI A · B connector MEM: CAM: OFF: Item OUTPUT ITEM Variable range MENU ONLY TC STATUS During EE, such as recording, video images taken by the camera are output. Meanwhile, signals on the P2 card are output during playback.
AJ-HPX3700G-VQT1V68_eng.book 90 ページ 2008年10月15日 水曜日 午後6時38分 Settings of signals output from MON OUT connector The MON OUT connector outputs HD SDI signals or downconverted analog signals. Set the video signals output from the MON OUT connector by using the MONITOR OUT item on the menu (
AJ-HPX3700G-VQT1V68_eng.book 91 ページ 2008年10月15日 水曜日 午後6時38分 Handling data Set data file configuration The unit employs 6 sets for the file data area. For menu items that can be read from or stored in the respective areas, refer to [Menu] (page 166). SD memory card SET UP data Notes For information about how to navigate through the menu for this section, see [Setting Menu Options] (page 168). Access the respective data settings files after switching the PC MODE to “OFF”.
AJ-HPX3700G-VQT1V68_eng.book 92 ページ 2008年10月15日 水曜日 午後6時38分 Handling SD memory cards An SD memory card may be inserted or removed, either before or after the power is turned on. To insert an SD memory card Open the lid of the switch cover, and insert an SD memory card (optional) into the SD memory card slot with the notch upward. Close the lid. To remove the SD memory card Open the lid of the switch cover, and ensure that the busy lamp is not illuminated.
AJ-HPX3700G-VQT1V68_eng.book 93 ページ 4 2008年10月15日 水曜日 午後6時38分 To format the SD memory card, turn the jog dial button to move the arrow (cursor) to YES. Then, press the dial button. When the SD memory card has been formatted, the following message appears: To write set data on an SD memory card 1 Navigate the menu to the screen. To select a file number 2 Turn the jog dial button to move the arrow (cursor) to the option W.SELECT. Then, press the dial button.
AJ-HPX3700G-VQT1V68_eng.book 94 ページ 6 Turn the jog dial button until a desired character appears. The characters that appear are switched in the following order: Space: Ð Alphabetical characters: Ð Numerals: Ð Symbols: 7 8 2008年10月15日 水曜日 午後6時38分 A to Z 0 to 9 ', >, <, /, - Press the jog dial button to accept a desired character. Turn the jog dial button to move the arrow (cursor) to the next digit (clockwise), and repeat steps 6 - 7 to set characters (up to 8 characters).
AJ-HPX3700G-VQT1V68_eng.book 95 ページ 2008年10月15日 水曜日 午後6時38分 To read data on an SD memory card 1 6 Navigate the menu to the screen. Turn the jog dial button to move the arrow (cursor) to YES. Then, press the dial button. When the data has been read, the following message appears: To select a file number 2 Turn the jog dial button to move the arrow (cursor) to the menu option R.SELECT. Then, press the dial button.
AJ-HPX3700G-VQT1V68_eng.book 96 ページ 2008年10月15日 水曜日 午後6時38分 How to Use the User Data It is possible to write the settings data into the user area of the internal memory of the unit, or to read data written in this area. This data allows you to quickly reproduce an optimum setup state. 2 To write data, go to the screen from the FILE page.
AJ-HPX3700G-VQT1V68_eng.book 97 ページ 2008年10月15日 水曜日 午後6時38分 How to Use Scene File Data It is possible to write the settings data into the scene file area of the internal memory of the unit, or to read data written in this area. 16 types of scene files are available. This data allows you to quickly reproduce an optimum setup state. To use the scene file data, go to the screen from the FILE page. 7 8 Turn the jog dial button to move the arrow (cursor) to YES. Then, press the dial button.
AJ-HPX3700G-VQT1V68_eng.book 98 ページ 2008年10月15日 水曜日 午後6時38分 To read settings data for scene files 1 2 3 Navigate the menu to the screen. Turn the jog dial button to move the arrow (cursor) to the option SCENE SEL. Press the jog dial button to blink scene file numbers. Then, turn the dial button to select a desired scene file number (1 to 16). To return data for scene files to their defaults 1 2 3 4 5 8 98 Press the jog dial button to blink scene file numbers.
AJ-HPX3700G-VQT1V68_eng.book 99 ページ 2008年10月15日 水曜日 午後6時38分 To title settings data for scene files 1 2 10 Press the jog dial button to display the following message: Navigate the menu to the screen. Turn the jog dial button to move the arrow (cursor) to the TITLE item. 3 11 Turn the jog dial button to move the arrow (cursor) to YES. Then, press the dial button.
AJ-HPX3700G-VQT1V68_eng.book 100 ページ 2008年10月15日 水曜日 午後6時38分 Resetting Menu Option Settings to Defaults The menu settings can be reset to their defaults. To reset the settings to their defaults, select the menu option READ FACTORY DATA in the screen on the FILE page. All settings will be reset to their defaults. Note This operation does not delete the scene file, lens file, and the information stored as the user data.
AJ-HPX3700G-VQT1V68_eng.book 101 ページ 2008年10月15日 水曜日 午後6時38分 To save the lens file into the built-in memory Select the file No. 1 2 3 Using the menu operations, open the screen from the FILE page. Press the jog dial button to enter the file number. Give a title to the selected file. 5 Turn the jog dial button to move the arrow (cursor) to the TITLE item.
AJ-HPX3700G-VQT1V68_eng.book 102 ページ 2008年10月15日 水曜日 午後6時38分 13 When the jog dial button is pressed, the following 14 Turn the jog dial button to move the arrow (cursor) to message appears. YES, and press the jog dial button. The current white shading correction value, the flare compensation value, and the RB gain offset correction value are stored in the built-in memory of the unit.
AJ-HPX3700G-VQT1V68_eng.book 103 ページ 2008年10月15日 水曜日 午後6時38分 To write in and read out the lens file to/from the SD memory card The contents of the 8 lens files stored in the unit’s internal memory can be saved onto an SD memory card as card files under a single title. A total of 8 titles can be saved on an SD memory card. Furthermore, the 8 lens files saved under one title on an SD memory card can be loaded into the unit’s internal memory. Saving lens files on the SD memory card Select the card file No.
AJ-HPX3700G-VQT1V68_eng.book 104 ページ 2008年10月15日 水曜日 午後6時38分 Loading lens files from the SD memory card 1 2 3 Using menu operations, open the screen from the FILE page. Turn the jog dial button to move the arrow (cursor) to the CARD FILE SELECT item. Press the jog dial button and the card file number will flash. Turn the jog dial button to select the file (1 to 8) to be read.
AJ-HPX3700G-VQT1V68_eng.book 105 ページ 2008年10月15日 水曜日 午後6時38分 Chromatic Aberration Compensation (CAC) CAC is a function that automatically corrects registration errors mainly caused by slight chromatic aberration, which cannot be corrected with lenses, and minimizes color weepage on the images. What is the chromatic aberration? CAC operation For the 4 lenses listed on the left 1 2 3 B G R Install the lens on the unit and connect the lens connector. Open the screen on the MAINTENANCE page.
AJ-HPX3700G-VQT1V68_eng.book 106 ページ 2008年10月15日 水曜日 午後6時38分 To read the CAC FILE from an SD memory card 1 7 Insert the SD memory card with the CAC file downloaded from our support website. For downloading, refer to the following URL. https://eww.pavc.panasonic.co.jp/pro-av/ 2 3 Open the screen from the FILE page via the menu operation. Select TITLE READ using the jog dial button and then press the jog dial button. The lens product number is indicated in the TITLE column.
AJ-HPX3700G-VQT1V68_eng.book 107 ページ 2008年10月15日 水曜日 午後6時38分 To delete the CAC file from the unit 1 To delete the CAC file from the SD memory card Open screen from the MAINTENANCE page using the menu operation. The following screen is displayed.
AJ-HPX3700G-VQT1V68_eng.book 108 ページ 2008年10月15日 水曜日 午後6時38分 If the following messages are displayed when the jog dial button is pressed, the data cannot be deleted. Error message Measures DELETE NG NO CARD (No SD memory card is inserted) Insert an SD memory card. DELETE NG ERROR (Data cannot be deleted) It is assumed that the SD memory card is defective. Replace the card.
AJ-HPX3700G-VQT1V68_eng.book 109 ページ 2008年10月15日 水曜日 午後6時38分 Cinematograph Settings Menu items used for the film production are registered together in the scene file. Performing Cinematograph Settings 1 2 Open screen from the file page using the menu operation. Select READ CINEMATOGRAPH with the JOG dial button, and press the JOG dial button. Confirmation and Modification of Cinematograph Settings 1 2 Open the USER MENU by pressing the MENU button.
AJ-HPX3700G-VQT1V68_eng.book 110 ページ 2008年10月15日 水曜日 午後6時38分 Return Cinematograph Setting to Factory Setting 1 2 Display the MAIN MENU by pressing the MENU button for over 3 seconds, then open the screen from the FILE page. 3 Select READ FACTORY DATA with the JOG dial button, and press the JOG dial button. The following screen is displayed, so move the arrow (cursor) to “YES” by turning the JOG dial button, and press the JOG dial button.
AJ-HPX3700G-VQT1V68_eng.
AJ-HPX3700G-VQT1V68_eng.book 112 ページ 2008年10月15日 水曜日 午後6時38分 RGB 4:4:4 Output and P-10LOG Settings This unit can output signals suitable for Digital-Intermediate, which is a film production workflow. RGB 4:4:4 Output and P-10LOG Settings Link A signal is output from the HD SDI A connector and Link B signal is output from the HD SDI B connector by performing the cinematograph setting, and it is possible to set these signals as P-10LOG for RGB 4:4:4 output.
AJ-HPX3700G-VQT1V68_eng.book 113 ページ 2008年10月15日 水曜日 午後6時38分 Preparation Power Supply A battery pack or an external DC power supply can be used as the unit’s power supply. Using a Battery Pack Battery packs from the following manufacturers can be used: Anton/Bauer IDX PACO Sony Preparation The type of the battery can be checked or changed through the menu screen on the viewfinder or on the monitor.
AJ-HPX3700G-VQT1V68_eng.book 114 ページ 2008年10月15日 水曜日 午後6時38分 Mounting the Battery and Setting the Battery Type Using an Anton/Bauer Battery Pack 1 Mount the Anton/Bauer battery pack. a b 3 Setting the battery type. Select the battery type listed under BATTERY SELECT. Select BATTERY SELECT from the screen on the MAIN OPERATION page. Please refer to [BATTERY SETTING1] (page 196) for more information.
AJ-HPX3700G-VQT1V68_eng.book 115 ページ 2008年10月15日 水曜日 午後6時38分 When using a V-mount type battery pack Using an NP-1 type battery pack Mount the V-mount adapter plate (optional). Fit the plate, sliding it in the manner shown in the illustration. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire or electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
AJ-HPX3700G-VQT1V68_eng.book 116 ページ 2008年10月15日 水曜日 午後6時38分 Use of the external DC power supply 1 Connect the external DC power supply to the DC IN socket on the unit. DC IN socket External DC power supply 2 3 Turn on the power switch of the external DC power supply. (If the power switch is available on the external DC power supply.) Turn on the POWER switch on the unit. Inrush current is generated when the power of the unit is turned on.
AJ-HPX3700G-VQT1V68_eng.book 117 ページ 2008年10月15日 水曜日 午後6時38分 Mounting the lens and Performing the Flange Back and White Shading Adjustments Mounting the Lens 1 Adjusting the Lens Flange Back Raise the lens clamping lever and remove the mount cap. a If images are not clearly focused at both telephoto and wideangle positions during zoom operations, adjust the flange back (distance from the lens mounting surface to the image formation surface).
AJ-HPX3700G-VQT1V68_eng.book 118 ページ 2008年10月15日 水曜日 午後6時38分 8 9 Repeat steps 5 to 7 until the lens is in focus at both the telephoto and wide-angle positions. 7 Firmly tighten the F.f ring clamping screw. Notes The zebra pattern will not cover the whole screen if there is any unevenness in the lighting. In this case, make adjustments to the position of the lighting, etc. Make adjustments to the position of the lighting, etc. also when the lens aperture is not between F4 and F10.
AJ-HPX3700G-VQT1V68_eng.book 119 ページ 2008年10月15日 水曜日 午後6時38分 When making the white shading correction, make the adjustment while observing the R, G, and B waveforms in the horizontal and vertical directions with the waveform monitor. This now completes the white shading adjustments. The adjustment values are now stored in the non-volatile memory so that even when the unit’s power is turned off, there will be no further need to perform the white shading adjustment.
AJ-HPX3700G-VQT1V68_eng.book 120 ページ 2008年10月15日 水曜日 午後6時38分 Preparing for Audio Input Take the following steps to prepare the camera for connecting audio input devices. When Using the Front Microphone The unit can be equipped with the AJ-MC900G stereo microphone kit (optional). 1 3 Connect the microphone cable to the MIC IN jack on the camera. Open the microphone holder. b b. MIC IN jack 4 2 Set the AUDIO IN switch to [FRONT] depending on the audio channel to be recorded.
AJ-HPX3700G-VQT1V68_eng.book 121 ページ 2008年10月15日 水曜日 午後6時38分 When Using Audio Devices 1 2 3 Connect the audio device to the AUDIO IN jack with the XLR cable. Set the AUDIO IN switch to [REAR] for the channel to which the XLR cable is connected. Set the LINE/MIC/+48V selector switch on the rear panel to [LINE]. a Preparation c b a. LINE/MIC/+48V selector switch b. AUDIO IN switch c.
AJ-HPX3700G-VQT1V68_eng.book 122 ページ 2008年10月15日 水曜日 午後6時38分 Attaching the Shoulder Strap To detach the shoulder strap, first open the hooks, then detach the strap. Shoulder strap Note Make sure that the shoulder strap is securely attached. Press to open the hook. Attaching the Rain Cover When using the SHAN-RC700 Rain Cover a b b a. Tighten the cord b.
AJ-HPX3700G-VQT1V68_eng.book 123 ページ 2008年10月15日 水曜日 午後6時38分 Connection of the remote control unit (AJ-RC10G) It is possible to control some of the functions remotely by connecting the remote control unit AJ-RC10G (optional). When AJ-RC10G is connected to the REMOTE connector on the unit and the power switches of both of the unit and AJ-RC10G are turned on, the unit automatically enters the remote control mode.
AJ-HPX3700G-VQT1V68_eng.book 124 ページ 2008年10月15日 水曜日 午後6時38分 CHARA ON button This button is used to select whether to superimpose characters on the video signal output to the MON OUT connector of this unit. Note that the MON OUT CHARACTER switch of this unit does not function when the AJ-RC10G is connected. Scene file Scene files created on other types of device cannot be read. When an attempt is made to read such a file, AJRC10G displays “NG” on the liquid crystal screen.
AJ-HPX3700G-VQT1V68_eng.book 125 ページ 2008年10月15日 水曜日 午後6時38分 Connection of the DC OUT connector and External REC start/stop switch It is possible to draw 1.5 A current from the DC OUT connector of the unit. Recording start/stop can be controlled by connecting an external switch to this connector. Since a tally lamp can be used by connecting an LED to this connector, it is useful for shooting video when fixing the camera on a crane.
AJ-HPX3700G-VQT1V68_eng.book 126 ページ 2008年10月15日 水曜日 午後6時38分 Manipulating Clips with Thumbnails A clip is a data group that includes the images and sounds created from one shooting session, together with additional information such as text memos and meta data. The following manipulations can be performed using the cursor and SET buttons, while checking the images displayed on the LCD monitor: Playback, delete, copy or restore the clip. Add or delete a shot mark and a text memo on the clip thumbnail.
AJ-HPX3700G-VQT1V68_eng.book 127 ページ 2008年10月15日 水曜日 午後6時38分 Thumbnail Screen Press the THUMBNAIL button to display the thumbnail screen on the LCD monitor. Pressing the THUMBNAIL button again returns the display to the regular display. When switching is done from the regular screen display to the thumbnail screen display, all the clips will be displayed on the thumbnail screen. Pressing the THUMBNAIL MENU button allows you to navigate the thumbnail menu.
AJ-HPX3700G-VQT1V68_eng.book 128 ページ 2008年10月15日 水曜日 午後6時38分 4. Recording mode The recording mode for the clip on which the pointer is located is indicated. 5. System mode The format for the clip on which the pointer is located is indicated. 6. Duration The duration of the clip on which the pointer is located is indicated. 7. USB HOST mode indicator Indicated when the mode has been switched to USB HOST. 8. Clip Number The numbers set by the camera for all the clips recognized correctly by the P2 card.
AJ-HPX3700G-VQT1V68_eng.book 129 ページ 2008年10月15日 水曜日 午後6時38分 Selecting Thumbnails Multiple thumbnails can be randomly selected in the thumbnail screen. 1 2 It is possible to display only the selected thumbnails in the thumbnail screen for playback. Please refer to [Switching the Thumbnail Display] (page 130) for more information. Use the cursor buttons to move the pointer (yellow frame) to the desired clip and press the SET button. The frame around the selected thumbnail changes to a blue frame.
AJ-HPX3700G-VQT1V68_eng.book 130 ページ 2008年10月15日 水曜日 午後6時38分 Switching the Thumbnail Display The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen. 1 2 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. Press the THUMBNAIL MENU button. The thumbnail menu appears. a a. THUMBNAIL MENU button 130 3 Select THUMBNAIL from the thumbnail menu.
AJ-HPX3700G-VQT1V68_eng.book 131 ページ 2008年10月15日 水曜日 午後6時38分 Changing thumbnails It is possible to replace thumbnails with images that include previously attached text memos while images are recorded or played back. 1 2 3 5 Select THUMBNAIL TEXT MEMO CLIPS to display thumbnails of the clips with text memos. Place the pointer on the clip of the thumbnail that you intend to change, and then press SET button. Move the pointer to the text memo display on the lower row.
AJ-HPX3700G-VQT1V68_eng.book 132 ページ 2008年10月15日 水曜日 午後6時38分 Shot Mark A shot mark can be added to a clip thumbnail to distinguish this clip from the others. 1 2 3 4 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. Use the cursor buttons to move the pointer over the clip to which you want to attach a shot mark. Press the SHOT MARKER button. A shot mark will be attached to the clip thumbnail under the pointer.
AJ-HPX3700G-VQT1V68_eng.book 133 ページ 2008年10月15日 水曜日 午後6時38分 Playing back a clip at the position where a text memo is recorded 1 2 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. 3 Press the THUMBNAIL MENU button and select THUMBNAIL TEXT MEMO CLIPS from the thumbnail menu. The clip thumbnails with text memos attached are displayed in the upper section of the LCD monitor.
AJ-HPX3700G-VQT1V68_eng.book 134 ページ 2008年10月15日 水曜日 午後6時38分 Using a text memo to break a clip and copy the necessary portion 1 2 3 4 Select a desired text memo in a clip by carrying out steps 1-3 for [Playing back a clip at the position where a text memo is recorded] (page 133). Move the pointer to the desired text memo, and then press the SET button. You can select more than one text memo. Press the THUMBNAIL MENU button to select OPERATION COPY.
AJ-HPX3700G-VQT1V68_eng.book 135 ページ 2008年10月15日 水曜日 午後6時38分 Restoring Clips Restores clips that are defective as a result of sudden powering-down during recording, or removal of the P2 card being accessed. Note Only those clips with yellow defective clip indicators can be restored. Delete the clips with red defective clip indicators. If the clip cannot be deleted, format the P2 card.
AJ-HPX3700G-VQT1V68_eng.book 136 ページ 2008年10月15日 水曜日 午後6時38分 Copying Clips Selected clips can be copied to the P2 card in the desired slot or SD memory card. 1 2 3 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. Use the cursor buttons to move the pointer to the desired clip and press the SET button. Press the THUMBNAIL MENU button and select OPERATION COPY from the thumbnail menu. Select slot 1-5 or SD memory card as the destination.
AJ-HPX3700G-VQT1V68_eng.book 137 ページ 2008年10月15日 水曜日 午後6時38分 Setting of Clip Meta Data Information such as the name of person who shot the video, the name of the reporter, the shooting location, or a text memo can be read from the SD memory card, and can be recorded as Clip Meta Data. Reading Clip Meta Data (metadata upload) 1 2 Insert the SD memory card that contains the Clip Meta Data (metadata upload file). Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor.
AJ-HPX3700G-VQT1V68_eng.book 138 ページ 2008年10月15日 水曜日 午後6時38分 Checking and modifying read metadata The unit allows you to check details of metadata read from SD memory cards. 1 2 4 While viewing the settings for the metadata, use the cursor buttons to move the pointer to the desired option. Then, press the SET button. A soft keyboard screen is displayed, allowing you to modify the setting. Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor.
AJ-HPX3700G-VQT1V68_eng.book 139 ページ 2008年10月15日 水曜日 午後6時38分 Selecting the USER CLIP NAME recording method Select META DATA USER CLIP NAME from the thumbnail menu to select the recording method. Two options are available: TYPE1 and TYPE2.
AJ-HPX3700G-VQT1V68_eng.book 140 ページ 2008年10月15日 水曜日 午後6時38分 Setting of Proxy (optional) By attaching the video encoder card (AJ-YAX800G, optional) either to the optional slot or slot 5, it is possible to specify the proxy recording setting. The video encoder card is not recognized when inserted if the power for the unit is turned on. Insert the video encoder card after turning off the power for the unit. Select OPERATION DEVICE SETUP PROXY from the thumbnail menu to specify the setting.
AJ-HPX3700G-VQT1V68_eng.book 141 ページ 2008年10月15日 水曜日 午後6時38分 Formatting SD memory cards SD memory cards can also be formatted from the thumbnail screen. With an SD memory card inserted into the unit, perform the following operation: 1 2 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. Press the THUMBNAIL MENU button and select OPERATION FORMAT from the thumbnail menu. The following screen appears. Select “SD CARD”, then press the SET button.
AJ-HPX3700G-VQT1V68_eng.book 142 ページ 2008年10月15日 水曜日 午後6時38分 Setting the Thumbnail Display Mode The thumbnail display mode can be customized to suit your preferences. 1 2 Press the THUMBNAIL button. The thumbnail screen appears on the LCD monitor. Press the THUMBNAIL MENU button and select THUMBNAIL SETUP from the thumbnail menu. The following screen appears. ALL HIDE: ON: All indicators are not displayed. OFF: Indication/No indication will be set depending on the following menu.
AJ-HPX3700G-VQT1V68_eng.book 143 ページ 2008年10月15日 水曜日 午後6時38分 Properties The clip’s properties and the P2 card’s status are displayed. It is possible to edit and rewrite recorded clip metadata while clip properties are displayed. Clip Property From the thumbnail menu, select PROPERTY CLIP PROPERTY. The following screen appears. 4. Clip Information Displays detailed information about the clip. 3 1 2 5 4 1. Clip Number 2. Thumbnail 3.
AJ-HPX3700G-VQT1V68_eng.book 144 ページ 2008年10月15日 水曜日 午後6時38分 3 Press the SET button. The input window (soft keyboard) for modifying metadata is displayed. Use the keyboard to modify the metadata. 4 Press OK on the keyboard to write the modified metadata on the clip and return to the metadata window. Notes Deleting only the respective items of LOCATION (recording location data) in SHOOT is not possible. By setting ALTITUDE to empty, other LONGITUDE/ LATITUDE items are collectively deleted.
AJ-HPX3700G-VQT1V68_eng.book 145 ページ 2008年10月15日 水曜日 午後6時38分 Contents of P2 Card Status Display Settings From the thumbnail menu, select PROPERTY CARD STATUS. The following screen appears. When “REMAIN” is selected: 1 When “USED” is selected: 2 1 2 3 3 4 4 1. Write-protect Mark The mark appears if the P2 card is write-protected. 2. P2 Card Status (remaining free space) 1. Write-protect Mark The mark appears if the P2 card is write-protected. 2.
AJ-HPX3700G-VQT1V68_eng.book 146 ページ 2008年10月15日 水曜日 午後6時38分 SD memory card Status Display The status display enables a confirmation of the SD memory card formatted condition, available memory capacity etc. From the thumbnail menu, select PROPERTY DEVICES SD CARD. If the format is compatible with SD standards, the message “SD STANDARD: SUPPORTED” is displayed. If the format is not compatible with SD standards, the message “SD STANDARD: NOT SUPPORTED” is displayed.
AJ-HPX3700G-VQT1V68_eng.book 147 ページ 2008年10月15日 水曜日 午後6時38分 Connection with external device Connection with external devices using the USB 2.0 port Connection with a PC in the USB DEVICE mode By connecting the unit with an external PC using USB 2.0, the P2 card inserted to the unit can be used as a mass storage device. Procedures for establishing a connection with a PC 1 Notes Connect the USB cable to the USB 2.0 port. Notes The USB 2.0 cable is not included with the unit.
AJ-HPX3700G-VQT1V68_eng.book 148 ページ 2008年10月15日 水曜日 午後6時38分 USB HOST mode The unit can be connected to a hard disk drive that supports USB 2.0 to store data from cards on it, view thumbnails for stored clips, and write data back to P2 cards. Switching to the USB HOST mode 1 2 By navigating the menu, set the PC MODE SELECT menu option on the screen on the SYSTEM SETTING page to “USB HOST”, then the PC MODE option to “ON”. This will place the unit in USB HOST mode.
AJ-HPX3700G-VQT1V68_eng.book 149 ページ 2008年10月15日 水曜日 午後6時38分 1. PARTITION Viewing hard disk drive information You can view the information on the hard disk drive connected via USB 2.0 with the following steps. 1 Switch the mode to USB HOST. For more information, see [Switching to the USB HOST mode] (page 148). 2 3 This section indicates the type of the hard disk drive. The available functions depend on the type of hard disk drive.
AJ-HPX3700G-VQT1V68_eng.book 150 ページ 2008年10月15日 水曜日 午後6時38分 8. MODEL 11. VERIFY This section indicates the model of the P2 card that originally contained data on the partition. This section indicates the verification setting and results at the time the data on the partition was recorded. ON/FINISHED: Verification was performed and the results agreed. ON/FAILED: Verification was performed and the results did not agree. OFF: No verification was performed. - - -: No verification information is available.
AJ-HPX3700G-VQT1V68_eng.book 151 ページ 2008年10月15日 水曜日 午後6時38分 Writing data on a hard disk drive 1 2 3 4 5 Connect a hard disk drive via USB. A hard disk drive that has not been formatted with the unit must be formatted as directed in [Formatting a hard disk drive] (page 150). Insert a P2 card. Press the THUMBNAIL button to display the thumbnail screen. Press the THUMBNAIL MENU button and select HDD EXPORT from the thumbnail menu.
AJ-HPX3700G-VQT1V68_eng.book 152 ページ 2008年10月15日 水曜日 午後6時38分 6 Select YES to start writing data to the cards. To disable verification during writing, select HDD SETUP from the thumbnail menu and set the option VERIFY to OFF. This speeds up writing without verifying data writing. 7 When the writing is completed, the message “COPY COMPLETED!” is displayed.
AJ-HPX3700G-VQT1V68_eng.book 153 ページ 2008年10月15日 水曜日 午後6時38分 Maintenance and Inspections Inspections Before Shooting Make sure you check that the system is operating normally before embarking on a shoot. We recommend using a color video monitor to check the image. Preparing for Inspections 1 2 3 Mount a charged battery pack. Turn the POWER switch [ON] and check that 5 or more “BATT” indication marks appear.
AJ-HPX3700G-VQT1V68_eng.book 154 ページ 2008年10月15日 水曜日 午後6時38分 Inspecting the Memory Recording Functions Make sure you successively carry out the inspections from [1. Inspecting the P2 Card Recording] to [4. Inspecting the Earphone and Speaker]. 1. Inspecting the P2 Card Recording 1 2 3 4 Check on the display inside the viewfinder that the remaining P2 card recording capacity is sufficient.
AJ-HPX3700G-VQT1V68_eng.book 155 ページ 2008年10月15日 水曜日 午後6時38分 6. Inspection of the clock, time code, and user bits 1 2 3 4 5 Set the user bits as required. Please refer to [Setting of the user bits] (page 65) for the setting procedures. 6 7 Set the time code. Please refer to [Setting the Time Code] (page 68) for the setting procedures. Set the TCG switch to [R-RUN]. Set the TCG switch to [F-RUN]. Check that the counter display number changes regardless of recording status.
AJ-HPX3700G-VQT1V68_eng.book 156 ページ 2008年10月15日 水曜日 午後6時38分 Connector Signals DC IN 1 GND 2 NC 3 NC 4 +12 V Panasonic part number K1AA104H0038 Maker part number HA16RX-4P (SW1) (Hirose Denki) 4 1 2 Ensure that the polarities are used correctly for a power supply from an external source.
AJ-HPX3700G-VQT1V68_eng.
AJ-HPX3700G-VQT1V68_eng.book 158 ページ 2008年10月15日 水曜日 午後6時38分 LENS Panasonic part number K1AY112JA001 1 RET-SW On/off of the return video RETURN ON: GND RETURN OFF: OPEN 2 REC-START/ STOP Control for recording start/stop Maker part number HR10A-10R-12SC(71) (Hirose Denki) 9 +5 V 1 10 8 0V 7 6 START STOP START 3 GND GND 4 IRIS-AUTO On/off of the forced iris servo SERVO ON: +5 V±0.5 V SERVO OFF: OPEN 5 IRIS-CONT Control output for the lens iris F2.8: –6.2 V, F16: +3.4 V, CLOSE: +2.
AJ-HPX3700G-VQT1V68_eng.
AJ-HPX3700G-VQT1V68_eng.book 160 ページ 2008年10月15日 水曜日 午後6時38分 Warning System Warning Description Tables If a problem is detected immediately after the power is turned on, or during operation, this will be indicated by the WARNING lamp, lamps inside the viewfinder and a warning tone. Note The WARNING lamp has the highest priority, followed by the tally lamp, and then the warning tone. When multiple errors occur simultaneously a higher priority indication will be triggered.
AJ-HPX3700G-VQT1V68_eng.book 161 ページ 2008年10月15日 水曜日 午後6時38分 6. Recording Error Display window indication 9. “00:00:00:11” appears in the time code display field. Even after recording is stopped, this display continues to blink until the next operation is performed. P2 Card Nearly Full Display window indication One of the bars for remaining MEDIA capacity starts blinking. WARNING lamp Blinks once per second while recording continues.
AJ-HPX3700G-VQT1V68_eng.book 162 ページ 2008年10月15日 水曜日 午後6時38分 11. FAN STOP Display window indication No display. WARNING lamp Blinks 4 times per second. Tally lamp No display. Viewfinder The “FAN STOP” indicator blinks while recording continues. Warning tone It does not sound. Warning description The fan is at rest because something is wrong with it. Recording/playback operation The unit continues to operate.
AJ-HPX3700G-VQT1V68_eng.book 163 ページ 2008年10月15日 水曜日 午後6時38分 Error Codes The following error codes are displayed in the display window if an error occurs in the camera: Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 160) for countermeasures. Code No. Description Type of warnings E-11 Video initialization error 1. System Errors E-27 Recording control error 1. System Errors E-30 P2 card removal error 2.
AJ-HPX3700G-VQT1V68_eng.book 164 ページ 2008年10月15日 水曜日 午後6時38分 Warning and Error Display for Thumbnail Operation and USB HOST MODE Item Thumbnails Soft keyboard 164 Message Description Measure CANNOT ACCESS! Data cannot be accessed because it is corrupted or for other reasons. Restore media and clips to normal state before access. WRITE PROTECTED! The P2 or SD card is write protected. Insert write-enabled media. CARD FULL! The P2 or SD card is full. Insert media with sufficient capacity.
AJ-HPX3700G-VQT1V68_eng.book 165 ページ 2008年10月15日 水曜日 午後6時38分 Item Message Description Measure HDD CAPACITY FULL! Not enough space left on the hard disk. There is not enough space on the connected hard disk. Use a new hard disk or formatted hard disk. TOO MANY PARTITIONS! There are too many partitions. Hard disks can handle up to 23 partitions. Use a new hard disk or formatted hard disk. HDD DISCONNECTED! The unit is not connected to a hard disk. Reconnect the USB cable.
AJ-HPX3700G-VQT1V68_eng.book 166 ページ 2008年10月15日 水曜日 午後6時38分 Menu Menu Configuration MENU USER MENU SYSTEM SETTING MAIN MENU PAINT OPTION MENU OPTION RB GAIN CONTROL RGB BLACK CONTROL MATRIX COLOR CORRECTION LOW SETTING MID SETTING HIGH SETTING ADDITIONAL DTL SKIN TONE DTL KNEE/LEVEL GAMMA CAMERA SETTING VF CAM OPERATION Opening the Menus CAMERA ID SHUTTER SPEED SHUTTER SELECT USER SW SW MODE WHITE BALANCE MODE LENS/IRIS MAIN OPERATION USER MENU: Displayed when the MENU button is pressed.
AJ-HPX3700G-VQT1V68_eng.book 167 ページ 2008年10月15日 水曜日 午後6時38分 USER MENU:USER MENU is factory-set. The menu can be configured to suit your preferences by specifying each option according to your purposes and frequency of use, through the screen, which is accessible from the MAIN MENU page. For more information, see [Selecting Options for USER MENU] (page 169). To display USER MENU, press the MENU button. a MAIN MENU: Allows you to set all options on the settings menu.
AJ-HPX3700G-VQT1V68_eng.book 168 ページ 2008年10月15日 水曜日 午後6時38分 Setting Menu Options The menu options are set with the MENU and jog dial buttons. The menu comprises main menu, sub-menus and options menus. The data specified through menu options are written and saved in the internal memory of the unit. This section describes how to set options in MAIN MENU. The other menus can be configured in the same manner (the method of displaying the menu screen depends on the particular menu).
AJ-HPX3700G-VQT1V68_eng.book 169 ページ 2008年10月15日 水曜日 午後6時38分 6 7 8 Press the jog dial button. The value stops blinking and is accepted. To change the settings for other options on the same page, repeat steps 4 - 6. When the settings are finalized, press the MENU button. This terminates the menu option setting mode and returns the unit to normal operation mode. Selecting Options for USER MENU Go to the USER MENU SELECT page from MAIN MENU.
AJ-HPX3700G-VQT1V68_eng.book 170 ページ 2008年10月15日 水曜日 午後6時38分 Menu Description Tables SYSTEM SETTING The ____ in the Adjustable Range column indicates the preset mode. SYSTEM MODE Items/ Adjustable Data Saved Range SYSTEM MODE 1080-59.94i 1080-23.98PsF 1080-24PsF 1080-50i Remarks For setting the system frequency. When this item is switched, turn off the POWER switch on the unit and then turn it on again. Notes When USB DEVICE mode is selected, no change can be made to this option.
AJ-HPX3700G-VQT1V68_eng.book 171 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range USR SW F.RATE (1080-59.94i, 1080-23.98PsF, 1080-24PsF) 1FRAME : 24FRAME : 30FRAME (1080-50i) 1FRAME : 25FRAME Remarks When the FRATE function has been assigned to a user button, the starting frame rate under VFR operation is set.
AJ-HPX3700G-VQT1V68_eng.book 172 ページ 2008年10月15日 水曜日 午後6時38分 REC FUNCTION Items/ Adjustable Data Saved Range INTERVAL REC ON MODE ONE SHOT OFF Remarks Sets INTERVAL REC function. ON: Uses internal memory to perform interval recording. ONE SHOT: Performs “one-shot” recording for the duration specified under REC TIME, and then stops. OFF: INTERVAL REC is not performed. Note This item cannot be changed when “ON” is selected in LOOP REC MODE.
AJ-HPX3700G-VQT1V68_eng.book 173 ページ 2008年10月15日 水曜日 午後6時38分 OUTPUT SEL Items/ Adjustable Data Saved Range SIGNAL FORMAT 4:2:2 4:4:4 Remarks Select the signal that is output from the HD SDI A · B connectors. 4:2:2: YPBPR 4:2:2 format is selected. 4:4:4: RGB 4:4:4 format is selected. LINK A will be output from the HD SDI A connector, and LINK B from the HD SDI B connector. Items/ Adjustable Data Saved Range MONITOR OUT VBS HD SDI Select the output signal on the MON OUT connector.
AJ-HPX3700G-VQT1V68_eng.book 174 ページ 2008年10月15日 水曜日 午後6時38分 HD SDI A · B OUT MARKER Items/ Adjustable Data Saved Range MARKER SW OFF A B BOTH Remarks Switches the marker on and off. OFF: The characters are not superimposed. A: The characters are superimposed on the HD SDI A connector. B: The characters are superimposed on the HD SDI B connector. BOTH: The characters are superimposed on the HD SDI A connector and the HD SDI B connector.
AJ-HPX3700G-VQT1V68_eng.book 175 ページ 2008年10月15日 水曜日 午後6時38分 MONI OUT MARKER Items/ Adjustable Data Saved Range CENTER MARK OFF 1 2 3 4 LCD MONITOR Remarks Switch the center mark. OFF: Do not display center mark. 1: + (large) 2: Hollow (large) 3: + (small) 4: Hollow (small) – C U F R SAFETY MARK OFF 1 2 Select the frame type for the safety zone. OFF: Do not display frame. 1: Box Items/ Adjustable Data Saved Range BRIGHTNESS –7 : +0 : +7 Adjust the LCD monitor brightness.
AJ-HPX3700G-VQT1V68_eng.book 176 ページ 2008年10月15日 水曜日 午後6時38分 GENLOCK Items/ Adjustable Data Saved Range GENLOCK Remarks INT EXT Switch the camera synchronizing signal. INT: Synchronize with the internal reference signal regardless of the reference signal input to the GENLOCK IN connector. EXT: Synchronize with the reference signal input to the GENLOCK IN connector. HD SDI COMPOSIT For selecting the output signals that lock phases to the signals that are input in the GENLOCK IN connector.
AJ-HPX3700G-VQT1V68_eng.book 177 ページ 2008年10月15日 水曜日 午後6時38分 PAINT The ____ in the Adjustable Range column indicates the preset mode. RB GAIN CONTROL Items/ Adjustable Data Saved Range R GAIN AWB PRE* RGB BLACK CONTROL Remarks –200 : +000 : +200 For setting the Rch gain when the WHITE BAL switch is in the [PRST] position. MASTER PED* –200 : +000 : +200 For setting the Bch gain when the WHITE BAL switch is in the [PRST] position.
AJ-HPX3700G-VQT1V68_eng.book 178 ページ 2008年10月15日 水曜日 午後6時38分 MATRIX COLOR CORRECTION Items/ Adjustable Data Saved Range MATRIX TABLE Remarks A B For selecting the color correction table for the linear matrix. –63 : +31 : +63 For performing the linear matrix adjustment. (red/green) –63 : –04 : +63 For performing the linear matrix adjustment. (red/blue) –63 : –01 : +63 For performing the linear matrix adjustment. (green/red) –63 : +04 : +63 For performing the linear matrix adjustment.
AJ-HPX3700G-VQT1V68_eng.book 179 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range R (PHASE) Remarks –63 : +00 : +63 For performing the hue correction for red. –63 : +00 : +63 For performing the hue correction between red and magenta. –63 : +00 : +63 For performing the hue correction for magenta. –63 : +00 : +63 For performing the hue correction between magenta and blue. –63 : +00 : +63 For performing the hue correction for blue.
AJ-HPX3700G-VQT1V68_eng.book 180 ページ 2008年10月15日 水曜日 午後6時38分 When shooting with the MASTER GAIN set to “–3dB”, coloring phenomena may occur in portions of the video with high brightness. The coloring phenomena can be reduced by switching the OUTPUT/AUTO KNEE switch to [CAM/AUTO KNEE OFF], setting the MANUAL KNEE menu option of the screen to “ON”, and then changing the following menu options.
AJ-HPX3700G-VQT1V68_eng.book 181 ページ 2008年10月15日 水曜日 午後6時38分 HIGH SETTING Items/ Adjustable Data Saved Range MASTER GAIN –3dB : 6dB : 30dB ADDITIONAL DTL Remarks Select the master gain from –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, or 30 dB. DTL GAIN(+) 00 : 06 : 63 For performing the horizontal detail correction level setting. DTL GAIN(–) 00 : 10 : 31 For performing the vertical detail correction level setting. DTL CLIP For performing the noise elimination level setting for detail.
AJ-HPX3700G-VQT1V68_eng.book 182 ページ 2008年10月15日 水曜日 午後6時38分 SKIN TONE DTL Items/ Adjustable Data Saved Range SKIN TONE DTL OFF A B AB Remarks For selecting the skin color table for enabling the skin tone detail. The skin color table is provided in the DETECT TABLE item. By enabling the skin tone detail, it is possible to shoot human skin more accurately.
AJ-HPX3700G-VQT1V68_eng.book 183 ページ 2008年10月15日 水曜日 午後6時38分 KNEE/LEVEL Items/ Adjustable Data Saved Range MASTER PED Remarks –200 : +000 : +200 Set the master pedestal. ON OFF Set the mode when the AUTO KNEE switch is [OFF]. The KNEE MASTER POINT/KNEE MASTER SLOPE set value is enabled when this setting is “ON”. S C U F R MANUAL KNEE Notes The items indicated by are the setting items for PAINT MENU SW() R/W in the screen.
AJ-HPX3700G-VQT1V68_eng.book 184 ページ 2008年10月15日 水曜日 午後6時38分 AUTO KNEE is not performed when AJ-RC10G is connected, but the LED of the AJ-RC10G button is lit by pressing the A.KNEE ON button. GAMMA Items/ Adjustable Data Saved Range MASTER GAMMA Remarks 0.30 : 0.45 : 0.75 Set the master gamma in 0.01 steps. –15 : +00 : +15 Set the Rch gamma. –15 : +00 : +15 Set the Bch gamma.
AJ-HPX3700G-VQT1V68_eng.book 185 ページ 2008年10月15日 水曜日 午後6時38分 VF The ____ in the Adjustable Range column indicates the preset mode. VF DISPLAY Items/ Adjustable Data Saved Range STATUS MODE NORMAL FILM-REC Remarks For selecting the status display mode of the viewfinder. NORMAL: Normal status display FILM-REC: Status display for FILM REC Note Setting STATUS MODE to “FILM-REC” disables the DISP CONDITION and DISP MODE settings.
AJ-HPX3700G-VQT1V68_eng.book 186 ページ 2008年10月15日 水曜日 午後6時38分 VF MARKER VF USER BOX Items/ Adjustable Data Saved Range TABLE A B Remarks Select the VF MARKER setting table. First, select table “A” or “B”, then set the items below for each table. – C U F R CENTER MARK OFF 1 2 3 4 Switch the center mark. OFF: Do not display center mark. 1: + (large) 2: Hollow (large) 3: + (small) 4: Hollow (small) – C U F R SAFETY MARK OFF 1 2 Select the frame type for the safety zone. OFF: Do not display frame.
AJ-HPX3700G-VQT1V68_eng.book 187 ページ 2008年10月15日 水曜日 午後6時38分 VF INDICATOR1 Items/ Adjustable Data Saved Range EXTENDER VF INDICATOR2 Remarks ON OFF For selecting “ON” or “OFF” for the extender display. CAC ON OFF Set the shutter speed indication to “ON” or “OFF”. GAMMA MODE ON OFF Set the filter No. indication to “ON” or “OFF”. DRS ON OFF Set the AWB PRST/A/B indication to “ON” or “OFF”. P-10LOG ON OFF For selecting “ON” or “OFF” for the indication of the currently selected gain.
AJ-HPX3700G-VQT1V68_eng.book 188 ページ 2008年10月15日 水曜日 午後6時38分 VF INDICATOR3 Items/ Adjustable Data Saved Range P2CARD REMAIN Remarks OFF ONE-CARD TOTAL Select the indication mode for the P2 card’s remaining capacity. OFF: Disable the remaining capacity indication. ONE-CARD: Display the remaining capacity of the P2 card currently used for recording. TOTAL: Display the total remaining capacity of all P2 cards in slots. ON OFF Set the battery voltage indication to “ON” or “OFF”.
AJ-HPX3700G-VQT1V68_eng.book 189 ページ 2008年10月15日 水曜日 午後6時38分 MODE CHECK IND Items/ Adjustable Data Saved Range STATUS !LED Remarks ON OFF For the setting to display the status screen when the MODE CHECK button is pressed. GAIN (0dB) ON OFF For the setting to indicate causes for turning on the lamp on the viewfinder is displayed when the MODE CHECK button is pressed. The causes for turning on the lamp are displayed with .
AJ-HPX3700G-VQT1V68_eng.book 190 ページ 2008年10月15日 水曜日 午後6時38分 CAM OPERATION The ____ in the Adjustable Range column indicates the preset mode. CAMERA ID SHUTTER SPEED Items/ Adjustable Data Saved Range Remarks Setting 1 for the CAMERA ID recorded on color bars. Up to 10 characters are allowed for this setting. ID1 – C U F – Setting 2 for the CAMERA ID recorded on color bars. Up to 10 characters are allowed for this setting.
AJ-HPX3700G-VQT1V68_eng.book 191 ページ 2008年10月15日 水曜日 午後6時38分 SHUTTER SELECT Items/ Adjustable Data Saved Range POSITION1 SEL For 59.94 Hz 1/60 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 180.0deg 172.8deg 144.0deg 120.0deg 90.0deg 45.0deg For 50 Hz Remarks For setting the shutter speed for POSITION1. For setting the shutter speed for POSITION3. 1/50 1/60 1/120 1/250 1/500 1/1000 1/2000 HALF 180.0deg 172.8deg 144.0deg 120.0deg 90.0deg 45.0deg – C U F – For 59.
AJ-HPX3700G-VQT1V68_eng.book 192 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range POSITION5 SEL For 59.94 Hz 1/60 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 180.0deg 172.8deg 144.0deg 120.0deg 90.0deg 45.0deg For 50 Hz Remarks For setting the shutter speed for POSITION5. USER SW Items/ Adjustable Data Saved Range USER MAIN SW INH I.OVR S.BLK B.GAMMA Y GET DRS ASSIST C.
AJ-HPX3700G-VQT1V68_eng.book 193 ページ 2008年10月15日 水曜日 午後6時38分 SW MODE Items/ Adjustable Data Saved Range RET SW R.REVIEW CAM RET Remarks SMPTE FULL BARS SPLIT For selecting the color bar to be used. SMPTE: Color bar complied with the SMPTE standards FULL BARS: Full color bar SPLIT: SPLIT color bar for SNG (Satellite News Gathering) R.REVIEW PLAY For specifying what the unit does when the REC check button on the remote control unit is pressed. R.REVIEW: The unit performs rec review.
AJ-HPX3700G-VQT1V68_eng.book 194 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range WHITE BALANCE MODE AWB B TEMP Items/ Adjustable Data Saved Range FILTER INH ON OFF Remarks For selecting independently whether memory data for white balance (Ach, Bch) is retained or not for the respective CC filters. ON: Regardless of the CC filter, data for the memories (2 memories) for Ach and Bch is retained. OFF: The memory data (8 memories) for Ach and Bch is retained for the respective CC filters.
AJ-HPX3700G-VQT1V68_eng.book 195 ページ 2008年10月15日 水曜日 午後6時38分 MAIN OPERATION The ____ in the Adjustable Range column indicates the preset mode. BATTERY/P2CARD Items/ Adjustable Data Saved Range BATTERY SELECT Remarks Select the battery to use. Remaining capacity detection is also performed according to the selected battery. The variable range is changed by the item settings selected on the [BATTERY SETTING1] (page 196) and [BATTERY SETTING2] (page 197) menus.
AJ-HPX3700G-VQT1V68_eng.book 196 ページ 2008年10月15日 水曜日 午後6時38分 BATTERY SETTING1 Items/ Adjustable Data Saved Range PROPAC14 • Remarks Enable selection under BATTERY SELECT. : Enable selection. •: Disable selection. DIONIC90 • Remarks Enable selection under BATTERY SELECT. : Enable selection. •: Disable selection. AUTO MANUAL Select auto or manual to set the NEAR END voltage. AUTO: Set voltage automatically. MANUAL: Set voltage manually. AUTO MANUAL Select auto or manual to set the NEAR END voltage.
AJ-HPX3700G-VQT1V68_eng.book 197 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range ENDURA10 • AUTO MANUAL 11.0 : 13.2 : 15.0 Remarks Enable selection under BATTERY SELECT. : Enable selection. •: Disable selection. Select auto or manual to set the NEAR END voltage. AUTO: Set voltage automatically. MANUAL: Set voltage manually. When “MANUAL” is selected in the menu above, set the NEAR END voltage in 0.1 V steps.
AJ-HPX3700G-VQT1V68_eng.book 198 ページ 2008年10月15日 水曜日 午後6時38分 MIC/AUDIO1 Items/ Adjustable Data Saved Range FRONT VR CH1 OFF FRONT W.L. REAR ALL Remarks Select whether or not to enable the FRONT AUDIO LEVEL control for the signal selected as the input signal to AUDIO IN CH1. OFF: Disabled for any input selected. Recording level does not change by turning the volume control. FRONT: Only enabled when [FRONT] is selected. W.L.: Only enabled when [W.L.] (wireless) is selected.
AJ-HPX3700G-VQT1V68_eng.book 199 ページ 2008年10月15日 水曜日 午後6時38分 MIC/AUDIO2 Items/ Adjustable Data Saved Range FRONT MIC POWER TC/UB Remarks ON OFF Select the phantom power supply for the front microphone. ON OFF Select the phantom power supply for the rear microphone. When “OFF” is selected, no phantom power is supplied even if the LINE/MIC/ +48V selector switch is set to [+48V]. Items/ Adjustable Data Saved Range TC MODE DF NDF Set the time code mode. DF: Drop frame. NDF: Non drop frame.
AJ-HPX3700G-VQT1V68_eng.book 200 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range VITC UB MODE USER/EXT TIME DATE TCG FRM RATE REGEN Remarks Select the user bits mode for VAUX TC (VITC). USER/EXT: If UB MODE is set to “EXT”, the EXT value is recorded. If not, USER value set by UB is recorded. TIME: Select local time (hours, minutes, seconds). DATE: Select local date and time (2 last digits of year, month, date, time). TCG: TCG value enters UB.
AJ-HPX3700G-VQT1V68_eng.book 201 ページ 2008年10月15日 水曜日 午後6時38分 FILE The ____ in the Adjustable Range column indicates the preset mode. SD CARD READ/WRITE Items/ Adjustable Data Saved Range R.SELECT 1 : 8 SD CARD R/W SELECT Remarks Select the file number to read out. Items/ Adjustable Data Saved Range SYSTEM MODE ON R/W OFF – – – F – Read out the data from the SD memory card. READ – – – – – W.SELECT 1 : 8 Write the unit’s menu data to the SD memory card.
AJ-HPX3700G-VQT1V68_eng.book 202 ページ 2008年10月15日 水曜日 午後6時38分 CAC FILE CARD READ Items/ Adjustable Data Saved Range CARD FILE SELECT 01 : 32 Remarks For selecting the number of the chromatic aberration correction file on the SD memory card that will be read or deleted. – – – F – For reading CAC file from the SD memory card. When selected, the following FILE READ screen appears. READ – – – – – For deleting a CAC file from the SD memory card.
AJ-HPX3700G-VQT1V68_eng.book 203 ページ 2008年10月15日 水曜日 午後6時38分 LENS FILE SCENE Items/ Adjustable Data Saved Range FILE NO. 01 : 64 Remarks Select the lens file number. Read out the cinematograph setting. READ CINEMATOGRAPH Read the lens file data. READ USER DATA Write the lens file data. SCENE SEL – – – – – Read out the data from the user area in the memory. – – – – – WRITE – – – – – For resetting the all data of the lens file.
AJ-HPX3700G-VQT1V68_eng.book 204 ページ 2008年10月15日 水曜日 午後6時38分 MAINTENANCE The ____ in the Adjustable Range column indicates the preset mode. LENS ADJ LENS FILE ADJ Items/ Adjustable Data Saved Range F2.8 ADJ Remarks ON OFF The iris is only set to F2.8 when this item set to “ON”. (Adjustment to F2.8 will be executed on the lens) ON OFF The iris is only set to F16 when this item set to “ON”.
AJ-HPX3700G-VQT1V68_eng.book 205 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range CAC ADJ CHAR FPGA Items/ Adjustable Data Saved Range CAC CONTROL ON OFF Remarks ON: OFF: Enable chromatic aberration correction Disable chromatic aberration correction Remarks Displays the version of the program for the HD signal I/O control FPGA. – – – – – DC FPGA Displays the version of the program for the SD signal I/O control FPGA.
AJ-HPX3700G-VQT1V68_eng.book 206 ページ 2008年10月15日 水曜日 午後6時38分 OPTION MENU The ____ in the Adjustable Range column indicates the preset mode. OPTION AREA SETTING Items/ Adjustable Data Saved Range ENG SECURITY ON OFF Remarks Select whether or not to prohibit opening the menu screen. ON: Menu screen cannot be opened. Please consult your distributor to release the setting. OFF: Menu screen can be opened.
AJ-HPX3700G-VQT1V68_eng.book 207 ページ 2008年10月15日 水曜日 午後6時38分 Updating the firmware incorporated into the unit The firmware can be updated using either of the following two methods. 1. Checking the current version of firmware and performing the update using the dedicated tool (P2_Status_Logger) PASS (P2 Asset Support System) is only available to customers who have completed customer registration with Panasonic.
AJ-HPX3700G-VQT1V68_eng.book 208 ページ 2008年10月15日 水曜日 午後6時38分 Specifications General Power supply: DC 12 V (11.0 V to 17.0 V) Power consumption: 42 W (Main unit only) indicates safety information.
AJ-HPX3700G-VQT1V68_eng.book 209 ページ 2008年10月15日 水曜日 午後6時38分 General Recording Record media: P2 card Recording formats: Selectable from AVC-Intra100, AVC-Intra50, DVCPRO HD Recording video signals: 1080/59.94i, 1080/50i, 1080/29.97P, 1080/23.98P, 1080/24P, 1080/25P Recording audio signals: 48 kHz, 16-bit, 4ch Recording/playback time: AVC-Intra100/DVCPRO HD: 8 GB 1: approx. 8 min 16 GB 1: approx. 16 min 32 GB 1: approx. 32 min AVC-Intra50: 8 GB 1: approx. 16 min 16 GB 1: approx. 32 min 32 GB 1: approx.
AJ-HPX3700G-VQT1V68_eng.book 210 ページ 2008年10月15日 水曜日 午後6時38分 Input/output Unit GENLOCK IN: BNC 1, 1.0 VP-P, 75 Ω (This is available as the return video input connector.) MON OUT: BNC 1 (It can be switched among HD SDI/VBS.) HD SDI: 0.8 VP-P, 75 Ω (Compliant with the SMPTE292M/ 299M standards) VBS: 1.0 VP-P, 75 Ω HD SDI A: BNC 1 HD SDI: 0.8 VP-P, 75 Ω (Compliant with the SMPTE292M/ 299M/372M/352M standards) Dual Link with HD SDI B supported HD SDI B: BNC 1 HD SDI: 0.
AJ-HPX3700G-VQT1V68_eng.book 211 ページ 2008年10月15日 水曜日 午後6時38分 Software information for this product 1 Customer advisory: This product includes software licensed under the GNU General Public License (GPL) and GNU Lesser General Public License (LGPL); customers have the right to download, modify, and redistribute source code for this software. Descriptions of the GPL and LGPL are stored on the installation CD included with this camera-recorder. See the folder named \LDOC.
AJ-HPX3700G-VQT1V68_eng.book 212 ページ 2008年10月15日 水曜日 午後6時38分 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.