Operating Instructions Part 1 Digital Cellular Phone Before operating this equipment please read these instructions (parts 1 and 2) completely.
Contents Getting Started ................................................... 1 Inserting and removing the SIM....................... 1 Attaching and removing the battery................. 1 Charging the battery ........................................ 2 Operation of battery level indicator.................. 2 Low battery power warning.............................. 2 Keys & Displays ................................................. 3 Keys.................................................................
Contents My Media Menu Structure................................ 73 My Media ........................................................... 74 Pictures (My Media > Pictures)...................... 74 Sounds (My Media > Sounds) ....................... 75 Shortcuts........................................................ 76 Text templates ............................................... 76 Memory status ............................................... 77 Personal WAP/MMS Settings ..........................
Getting Started Some services described in this manual are network dependent or may only be available on a subscription basis. Some functions are SIM dependent. For more information contact your service provider. Inserting and removing the SIM The SIM is inserted into the back of the phone. (See “Attaching and removing the battery” below to remove or attach the battery.
Getting Started Charging the battery Connecting and disconnecting the Fast Travel Charger The battery must be attached in the phone before the charger is connected. Do not force the connector as this may damage the phone and/or the charger. Connect the charger to the mains power supply. When the phone is charging, the charging indicator will light and a scrolling icon will appear in the main display.
Keys & Displays Speaker Earpiece (Receiver) Main Display One Push Auto Open button Press to open the handset Left Soft key Alert Mute key Press to mute Alert Send key To answer a call or to make an outgoing call 1 key/Voicemail key Press and hold to call voicemail Asterisk key Charging Connector Navigation key Select/scroll/move/ Alert mute/Keyguard Right Soft key Personal Handsfree Connector Power/End key Press and hold to switch your phone on/off International Dialling Prefix key Pause key/ Quiet Mod
Keys & Displays Keys Key Function Navigation key: Select and save settings, and scroll/move through menus, text and Contacts. Also controls movements while playing games. Select key: Press centre to select option or to save. 0 < Keyguard key: From Idle mode, press and hold to lock the keypad, or press to unlock the keypad. Alert Mute key: Turns ring tone off and stops vibration when receiving a call (Alert mute). 4 Scroll key: Press top or bottom edge to move screen cursor up or down.
Keys & Displays Shortcuts When you are familiar with the menu system, you can use the keypad to access features instead of navigating through the display menus.
Keys & Displays Display Icon Main display Meaning Car profile is active SMS message storage area is full MMS message storage area is full Java™ (Suspended) Unread SMS message Unread MMS message With some operations, the display automatically clears after 2.5 seconds or after pressing any key. Unread WAP push message Call Diverts is on Status icons Different icons are shown, depending on the features you are using and the options you have selected.
How to Use This Phone Selecting a menu option From Idle mode, press the centre of the Navigation key < to open the main menu display. The main menu display has 9 options. Main menu Press to Cancel/Exit or to perform function displayed in lower right corner. Press to perform function displayed in the lower left corner.
How to Use This Phone Symbols used in this manual The table below shows the symbols used throughout these instructions and the corresponding meanings in the column on the right.
Phone Basics and Managing Calls Switching phone ON/OFF Press and hold D for 3 seconds to switch phone on • When the phone is switched on, a greeting may be displayed and the phone enters Idle mode. Press and hold D again to switch phone off When switching the phone off, use only D to avoid damaging the phone. Displaying menu 1 To access the menu, press < in Idle mode 2 The menu will be displayed (The menu may vary depending on your SIM.) Making calls • To make a call, start in Idle mode.
Phone Basics and Managing Calls International dialling The international code for the destination country/region should be entered, followed by the area code and phone number. 1 Press and hold # 2 Enter country/region code 3 Enter area code and phone number C / < NOTE Many countries/regions include an initial “0” in the area code. This should, in most cases, be omitted when dialling international numbers. If you have difficulties making international calls, contact your service provider.
Phone Basics and Managing Calls Voicemail You need to subscribe to the voicemail service through your service provider before you can retrieve voicemail messages. To check if voicemail access has been configured, press and hold $. See “Voicemail” on page 47 on how to programme.
Phone Basics and Managing Calls In-call options During a call: A for options 4 required option < / A Option Explanation Hold Call Put a call on hold.
Phone Basics and Managing Calls Incoming call while on a call During a call, you may receive another call. To enable this, Call Waiting must be on. (See “Call Waiting” on page 25.) Accept a second call: C / A (The second call is active, the current call is put on hold) When two calls are connected, the following options are available by pressing A.
Phone Basics and Managing Calls Multi-party call A multi-party call has 3 or more people in conversation at the same time. (F) 1 Establish a multi-party call by merging two calls 2 Continue to add people to the multi-party call (up to 5 connections in total) by calling others or by accepting incoming calls When making a call or accepting an incoming call, the multi-party call is placed on hold. The callers already in the multi-party call can continue to talk with each other while on hold.
Phone Basics and Managing Calls Call log Recently dialled phone numbers, answered calls and missed calls are stored in the Call log. The numbers in the Call log list can be used to call, send messages or add to Contacts. You can also delete the numbers from the list.
Phone Basics and Managing Calls Saving a phone number from Call log into the Contacts list 1 C 2 2 Dialled numbers, Answered calls or Missed calls 3 4 required phone number < 4 A 5 4 Add to contacts < / A 6 4 Phone or SIM < / A 7 4 required icon < 8 Enter as appropriate < (If required, repeat steps 7 and 8) 9 A Options in Call log In each Call log list, the following options are available by pressing A.
Explore the Menus Games Games Download Settings Messages Create new Inbox Archive Voicemail (Chat) Cell Broadcast Settings Memory status Calendar My Media Pictures Sounds Shortcuts Text templates Memory status Applications (SIM Tool Kit) Alarm Sound recorder Calculator Infrared Profiles Normal Quiet Meeting Outdoor Car Browser PANASONIC BOX Contacts Contacts list Add contact Call log Speed Dial list View groups Advanced (Service numbers) Settings Sound Vibration Alert Display Language Data connectio
Settings Menu Structure Sound Vibration Alert On Off Incoming Tone Incoming Volume Message Tone Message Volume Key Tone Key Volume Warning Tone Display Display language Input language Language Settings Data connections New Search Select Network Search Mode GSM network Calls PIN entry Change PIN2 Fixed Dial Call Barring Security Time and date Time Date Any key answer On Off Keyguard Service Charge is SIM dependent (E).
Settings Settings Sound Tone setting You can set ring tone, ring volume, etc. The ring tone can be changed to one of the tones from Preinstalled, My Media or Download. Incoming tone and Message tone can have different ring tones and volume assigned. Ring volume increases in steps to the level you selected. Keep in mind that the speaker located next to the receiver may sound too loud when the phone is held to your ear.
Settings Settings Setting Key Volume From Sound menu 1 4 Key Volume < / A 2 4 / 2 adjust the volume level (0 - 4) < / A Sound Setting Warning Tone From Sound menu 1 4 Warning Tone < / A 2 4 On or Off < / A Vibration Alert Vibration Alert setting Vibration Alert can be set to indicate an incoming call and a received message.
Settings Settings Display setting Setting Wallpaper From Display menu 1 4 Wallpaper < / A Display 2 4 Preinstalled, My Media or Download < / A 3 4 required data 4 To view and save, press < then < / A to save or To save without viewing, press A Display Colour, Brightness, Wallpaper, Backlight time and Key Backlight can be changed.
Settings Settings Language setting You can change the language used for display messages and/or text entry. From Language menu Language Data connections GSM network 1 4 Display language or Input language < / A 2 4 required language < / A Data connections setting GPRS settings and CSD settings are stored in the Data connections menu. Data can be sent/received using GPRS or CSD technology.
Settings Settings When the Search Mode is set to Automatic the phone will automatically reselect a new network in order to maintain optimum network availability. The network list is used when the Search Mode is set to Automatic. The location numbers in the preferred network list show the search priority. You can amend the list as follows: GSM network National regulations may not permit roaming in your home region.
Settings Settings Call settings Call Diverts Voice, fax, and data calls can be diverted to different numbers in different situations. For example, you may want to divert voice calls to voice mail when the phone is switched off.
Settings Settings To change the registered number to divert: From Calls menu 1 4 Call Diverts < / A 2 4 Divert Voice, Divert Fax or Divert Data < / A 3 4 the circumstances to initiate the divert A (Options) Calls 4 4 On < / A 5 4 Direct input or From Contacts < / A 6 When you select Direct input, enter phone number to divert < (If you select A after entering phone number, 4 Ok < / A) or When you select From Contacts, 4 required contact from the Contacts list A Request of Call Diverts will be sent to net
Settings Settings Send my number You can set whether or not to show your phone number to another phone (Caller ID). From Calls menu 1 4 Send my number < / A Calls 2 4 Network set, On or Off < / A Call Duration Displays the duration of incoming or outgoing calls. From Calls menu 1 4 Call Duration < / A 2 4 Incoming or Outgoing < / A To reset counter, < x 2 / A x 2 Service Charge You can check the charges for your calls. From Calls menu 4 Service Charge < / A The following can be set.
Settings Settings Security settings The PIN protects your SIM against unauthorised use. If you enable the PIN, every time the phone is switched on, you will be prompted to enter the PIN code. The PIN2 controls security for the Fixed Dial store.
Settings Settings Security Fixed Dial Fixed Dial is a part of Contacts, but with added security. When Fixed Dial is enabled: ¾Only numbers that are in the Fixed Dial store may be dialled. ¾Any manually dialled phone numbers must match a number already in the Fixed Dial store. If you store, edit or delete a phone number, you have to enter your PIN2 code.
Settings Settings Time and date setting From Time and date menu 1 4 Time < / A 2 # - , to enter the time using 24 hour clock < / A 3 4 Date < / A Time and date 4 # - , to enter the date < / A Some settings may be lost if the battery is removed or remains discharged for more than 1.5 hours. Time and date can be shown on the top of the display when in Idle mode. Any key answer Any key answer setting Calls can be answered by pressing any key except D / / < / @.
Settings Settings Keyguard setting Keyguard stops the keys from performing their normal function if accidentally pressed. When Keyguard is enabled, “ ” appears on the display. When a call is received, Keyguard is temporarily disabled and you can answer the call.
Profiles Menu Structure Normal Quiet Profiles Meeting Outdoor Car 31
Profiles Profiles Profile setting You can switch between five profiles in your phone, each with a distinct combination of ring tone, ring volume, etc. Profiles are set up for use in different environments – for instance you might want to create a Quiet profile, a Meeting profile with a ring tone appropriate for formal occasions and an Outdoor profile for noisy environments. Within each profile, distinct melodies can be set as incoming call and message alerts.
Profiles Profiles Message Volume From Profiles menu 1 4 required profile A 2 4 Edit < / A 3 4 Message Volume < / A 4 4 / 2 adjust the volume level (0 - 4) < / A Key Tone From Profiles menu 1 4 required profile A 2 4 Edit < / A 3 4 Key Tone < / A 4 4 required tone type < / A Key Volume From Profiles menu 1 4 required profile A 2 4 Edit < / A 3 4 Key Volume < / A 4 4 / 2 adjust the volume level (0 - 4) < / A Warning Tone From Profiles menu 1 4 required profile A 2 4 Edit < / A 3 4 Warning Tone < / A 4 4
Text Entry (Edit) You can use alphanumeric characters to enter details into Contacts, to create text, email messages, etc. Text mode T9® (T9 , T9 or T9) (Input language: English) Key Numeric (Input mode indicator: 0-9) Multi-tap (Input mode indicator: Abc, ABC or abc) # Alternatives . @ / - _+ 0 $ .,-?!’@:;/1* / (Hold) Character list .
Text Entry (Edit) Input mode Input mode change Input mode changes by pressing and holding (over 1 sec) ". Input mode Multi-tap -> Numerals -> T9 (Selected tegic language) (Abc -> 0-9 -> T9 ) The phone keeps the selected input mode. Text input T9® Using this mode of text input dramatically reduces the number of key presses required: Press a key once for any letter you require on that key. The desired letter may not be displayed.
Messages Menu Structure Messages Create new MMS SMS Inbox MMS SMS Archive MMS SMS Voicemail Call Mailbox (Web mail) Set Mailbox number (Chat) Cell Broadcast On/Off Read messages Options Settings MMS SMS Memory status MMS SMS Chat and Web mail are network operator dependent (F).
Messages Messages Create new MMS (Multimedia Messaging Service) Your phone is designed to be compatible with certain Multimedia Messaging Services (MMS). You can send picture and music with text messages. The recipient can play it as a slide show. MMS messages can be sent to another mobile phone with MMS capability or to an email address. When you receive an MMS message, a notice will inform you that you have received a message. (See page 40.
Messages Messages Creating a slide In order to send an MMS with more than one picture, text or sound, you need to add new slides to the MMS. From Create new menu 1 4 MMS < / A Create new 2 4 Add picture, Add text or Add sound < / A, then select a picture or sound, or enter a text 3 4 Slides < Slide option While Slides is highlighted, the following options are available by pressing A.
Messages Messages Sending a message When a message is completed, press A 1 4 Send < / A 2 4 Add subject < 3 Enter subject < Create new 4 4 Add recipient < 5 4 From Contacts, Enter number or Enter address < / A 6 When you select From Contacts, 4 required contact A or When you select Enter number, enter number < / A or When you select Enter address, enter address < 7 4 Send < Before sending a message, the following options are available by pressing A.
Messages Messages Receiving messages When you receive an MMS message, the message icon ( with a tone, illumination, and/or vibration. ) is displayed along From Inbox menu 1 4 MMS < / A Inbox 2 4 required notification < The following options are available by pressing A.
Messages Messages Viewing message lists The following messages are stored in Archive. ¾Outbox: When a message has been sent it is stored in the Outbox. ¾Unsent: Undelivered messages are stored in Unsent. ¾Drafts: Use to create a message draft. Archive MMS Drafts: Messages that are saved in the MMS mode are saved in Drafts. If the transmission of an MMS message fails, the message is stored in Unsent together with other saved messages.
Messages Messages Setting the MMS message server / profile MMS message server and profile setting must be done before you can send or receive an MMS message. Please check with your network operator if additional settings are required. You can select one of five server URLs on the phone.
Messages Messages SMS (Short Message Service) You can receive, display, edit and/or send text messages on any network that has a roaming agreement. (Dependent on the recipient’s phone parameters.) The message centre number should be preprogrammed on the SIM, changing this number (see page 46) may cause failure of a text message. Creating a text message Create new From Create new menu 1 4 SMS < / A 2 Create text message – max.
Messages Messages Receiving messages When you receive an SMS message, the message icon ( with a tone, illumination, and/or vibration. ) is displayed along Reading a received message From Inbox menu Inbox 1 4 SMS < / A 2 4 required message < When viewing messages, the following options are available by pressing A.
Messages Messages Archive Viewing message lists These message lists are stored in Archive. ¾Outbox: When a message has been sent, it is stored in the Outbox. ¾Unsent: If the transmission of an SMS message fails, the message is stored in Unsent together with other saved messages. Messages that are edited and saved in the SMS mode are saved in Unsent. ¾Draft: Use to create a message draft. SMS Draft: The last message you edit in the SMS mode is saved in the Draft.
Messages Messages Setting the Message Centre number The message centre number should be preprogrammed on the SIM, changing this number may cause failure of a text message. From Settings menu 1 4 SMS < / A Settings 2 4 Message Centre < / A 3 Enter message centre number in international dial format (see “International dialling” on page 10) < When the Message Centre number has been pre-installed, please do not change the number.
Messages Messages Voicemail Voicemail Voicemail is an innovative service that lets you stay up-to-date with all of your messages. You must subscribe to voicemail through your service provider before you can retrieve voicemail or email messages. Listening to Voicemail messages From Voicemail menu 4 Call Mailbox < / A Stored mailbox number is dialled and you can listen to voice messages.
Messages Messages Cell Broadcast You can receive messages on specified topics, such as traffic and weather information, from your network operator. Setting Cell Broadcast On/Off Cell Broadcast From Cell Broadcast menu 1 4 On/Off < / A 2 4 On or Off < / A Reading a received message From Cell Broadcast menu 1 4 Read messages < / A 2 4 required message < This function is your network operator dependent (F). Options You can add, edit and delete topics and languages.
Contacts Menu Structure Contacts list Add contact Phone SIM Call log Dialled numbers Answered calls Missed calls Contacts Speed Dial list View groups Advanced My Number Group Settings Memory status Copy from SIM (Service numbers) Service numbers is SIM dependent (E).
Contacts Contacts Browsing Contacts You can search Contacts by name. When browsing by name, pressing a letter key will take you to the first entry starting with that letter.
Contacts Contacts Storing Storing a number in SIM In the SIM, you can store: name, phone number. The length of name and number and the total amount of data are dependent on your SIM. Phone numbers can be stored in your SIM or in your phone. From Add contact menu 1 4 SIM < / A 2 4 name icon ( )< 3 Enter the name < Add contact 4 4 mobile icon ( )< 5 Enter the phone number < / A 6 A Options in SIM Contacts When the name is being entered, the following options are available by pressing A.
Contacts Contacts Storing a number in your phone In the phone, you can store: name, phone no. 1, phone no. 2, email address, picture and group.
Contacts Contacts Call log Recently dialled phone numbers, answered calls and missed calls are stored in the Call log. The numbers in the Call log list can be used to call, send messages or add to Contacts. You can also delete the numbers from the list.
Contacts Contacts Call log Options in Call log In each Call log list, the following options are available by pressing A. 4 required option < / A Option Explanation Call Call selected number Send message Send MMS/SMS message to selected number Add to contacts Store number to Contacts Delete Delete selected log Delete all Delete all logs in the list (This option is available in the Call log list.) Speed dial Speed Dial list Phone numbers from the Speed dial of Contacts can be dialled quickly.
Contacts Contacts View groups Grouping Contacts entries The ability to group Contacts entries together is an extra function of Phone Contacts. Groups are used to collect together types of Contacts entries, e.g. business and personal. Each group can be suitably titled for quick access to the entries contained within. You can attach a particular sound to the groups to identify them. (See “Group settings” on page 57.
Contacts Contacts My Number My Number is a contact where you can store your own numbers.
Contacts Contacts Group settings You can change the group name and attach a sound to the group.
Browser Menu Structure Browser PANASONIC BOX 58
Browser Browser Server setting Before Internet services can be accessed, you need to subscribe to your network operator or Internet Service Provider (ISP) to enable the relevant configuration information. Please contact your network service provider to ensure that your network settings are correct. Modifying previously entered settings may cause failure of the browser.
Browser Browser Browser options From Browser menu 1 A (Options) 2 4 select from below options < / A Option Explanation Select Select item Bookmarks Go to bookmark list Enter address Go to URL entry Save image The image in contents is saved in “My Media” Set as bookmark The displayed URL will be saved in Bookmarks Service Inbox Open Service Inbox Go to page Add bookmark Edit Delete Reload page Reload this page Advanced Go to homepage, clear the cache, view URL or view WAP information Set
Browser Browser Browser options (Enter address) You can jump to the required content by entering the URL. From Browser menu or contents 1 A (Options) 2 4 Enter address < / A 3 Enter URL < Browser options (Save image) Displayed images can be saved in “My Media”. From contents 1 A (Options) 2 4 Save image < / A 3 4 to see whole image 4 < / A to save Browser options (Set as bookmark) Favourite URLs can be saved in bookmarks.
Browser Browser Browser options (Reload page) Current page can be reloaded. From contents 1 A (Options) 2 4 Reload page < / A to reload this page Browser options (Advanced) From Browser menu or contents 1 A (Options) 2 4 Advanced < / A Browser options (Advanced - Home) Phone jumps to the set-up homepage. From Advanced menu 1 4 Home 2 < / A to jump to homepage Browser options (Advanced - Clear cache) Cache is cleared.
Browser Browser Browser options (Settings) From Browser menu or contents 1 A (Options) 2 4 Settings < / A Browser options (Settings - WAP profiles) Set up WAP browser. From Settings menu 1 4 WAP profiles < / A 2 4 required profile 3 < to activate or A to select options Browser options (Settings - Push access) Set up Push access to receive WAP messages.
Games Menu Structure Games Games Download Settings 64
Games Games Selecting games You have one pre-installed Java™ application – Ninja Action. The downloaded Java™ applications may also be listed. From Games menu 4 Java™ application you want to play < Games The following options are available by pressing A. 4 required option < / A Option Explanation Properties Indicate application name, version, vendor, description and store size Update Update Java™ application Delete Delete Java™ application Your phone supports J2ME™ Java™ applications.
Games Games Settings Settings Java™ applications settings, such as volume and backlight etc, can be changed.
Applications Menu Structure (SIM Tool Kit) Alarm Applications Sound recorder Calculator Infrared On Off SIM Tool Kit is SIM dependent (E). The menu name will be changed.
Applications Applications STK (SIM Tool Kit) This function is SIM dependent (E). This menu name will be changed.
Applications Applications Alarm Snooze Function Snooze Function lets the alarm repeat 5 times if you do not press < / A after stopping the alarm or press D to stop the alarm. To stop Snooze Function: Press < / A when “Stop snooze?” appears in the display. If you press @ / D, the alarm will repeat 5 more times at 5 minutes intervals until “End of alarm” is displayed. NOTE The alarm goes off at the time you set even if the phone is off.
Applications Applications Infrared By using the Infrared connection with another A500 or with other devices with an infrared port, you can transfer data between the devices. Preparing for Infrared connection Infrared If you try to send data that cannot be forwarded or saved, an error message will be displayed. ¾Place the A500 and another device with an Infrared port within the effective Infrared connection range of each other. ¾There must be no obstruction between the two communicating devices.
Applications Applications Sending Contacts From Idle display 1 < 2 0 Contacts < / A Infrared 3 4 Contacts list < / A 4 4 select contact to send A 5 4 Send by Infrared < / A Receiving data via Infrared port You need to activate Infrared before receiving data. Data received message is displayed then sent data is displayed.
Calendar Calendar Viewing calendar From Calendar menu 0 will display recent and future calendars The following options are available by pressing A.
My Media Menu Structure Pictures Stored pictures Download Sounds Stored sounds Download Record new sound Shortcuts Create MMS Inbox (MMS) Create SMS Inbox (SMS) Profiles Alarm My Media Text templates Memory status 73
My Media My Media Pictures (My Media > Pictures) You can manage pictures downloaded from the internet etc. Viewing pictures The data saved in the A500 is located in My Media. There are four pre-defined folders (Pictures, Sounds, Shortcuts, Text templates). The maximum capacity of the Data Folders is approx. 1 MB.
My Media My Media Sounds (My Media > Sounds) Downloaded sounds and Recorded sounds are stored in Stored sounds.
My Media My Media Shortcuts You can create shortcuts you want to use in My Media. Viewing shortcuts From Shortcuts menu Shortcuts 4 required content < The following options are available by pressing A.
My Media My Media Memory status You can see how much data is stored in the individual folders in My Media. The memory in “My Media” is separate from the MMS storage and Java™ storage.
Personal WAP/MMS Settings Use the table below to record your GSM/GPRS WAP/MMS settings. Item Profile name Homepage Gateway Port (Non secure / Secure) Data connections CSD Profile name Account Password Call type Phone number Idle timer GPRS Profile name Account Password APN name Auth type Normal / Secured / None (PAP) (CHAP) Message server 78 Provisioning information setting No.1 No.2 No.3 No.4 No.
Personal WAP/MMS Settings Item Provisioning information setting No.6 No.7 No.8 No.9 No.
Troubleshooting Should any problem persist, contact your dealer. Problem Cause Phone will not switch on. Remedy Check that the battery is fully charged and correctly connected to the phone. Extremely short battery life for a new battery. The network you are using and the condition of the battery can affect battery life. Short battery life for an old battery. The battery has worn out. Replace with a new fully charged battery.
Troubleshooting Important error messages These are some of the most important error messages which may be displayed: Failed Roaming in the selected area is not allowed. Roaming with the selected network is not allowed. The network has detected an authentication failure because your SIM is not registered with that network – contact your service provider. SIM blocked The SIM is blocked because the PIN unblocking key (PUK) has been entered incorrectly ten times – contact your service provider.
Glossary of Terms APN Access Point Name. Directs the user to the gateway or the required service. CHAP Challenge Handshake Authentication Protocol. A security feature in the GPRS network. Copy Copies selected text from a short text message without removing it from the original message. CSD Circuit Switched Data. A communication method used to transmit data over telephone connections. Cut Permanently removes selected text from a short text message.
How to Change the X Changeable Cover Before changing the cover, always switch off the power and disconnect the phone from the charger or any other devise. For your safety, follow these procedures when removing or attaching the cover. Removing the cover Loosen and remove the 4 screws with the screw driver included in this package and then gently remove the cover. Attaching the cover Place the cover right in the hollow in the phone and tighten the 4 screws firmly.
Index A Add contact ................................................. 51 Advanced .................................................... 56 Alarm........................................................... 68 Alert mute...................................................... 4 Any key answer..................................... 10, 29 Applications................................................. 68 Archive MMS ......................................................... 41 SMS ......................................
Index M Memory status Contacts ................................................... 57 Messages ................................................. 48 My Media .................................................. 77 Menu Displaying menu ......................................... 9 Main menu.................................................. 7 Menu option................................................ 7 Message Tone ...................................... 19, 32 Message Volume ..................................
The Serial Number can be found on the outside of the phone under the battery. For your convenience we recommend that you note the following details as a record of your purchase.
