User Manual

12
Getting Started
First-time Operation
NOTE
l
Panasonic PC Settings Utility
You can check the status of the computer, and change the settings. Double-click [Panasonic
PC Settings Utility] on the desktop to start the utility.
(
è
Reference Manual “Panasonic PC Settings Utility”)
l
PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maxi-
mum data volume for each record is 1024 bytes.
This information is only used for estimating the cause in the case when the hard disk goes down by
any possibility. They are never sent to outside via network nor used for any other purpose except
for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for manage-
ment information history] in [Hard Disk Status] of PC Information Viewer, and click [OK].
Then follow the on-screen instructions.
(
è
Reference Manual “Troubleshooting (Advanced)” - “Checking the Computer’s Usage Status”)
<For MUI OS model>
l
If the recovery partition is deleted, you cannot create Recovery Disc(s).
n
Before using wireless function
A
Open the cover, and then Slide the wireless switch to ON.
B
Click (Notication)atthetasktray,andthenclick (All settings) - [Network & Internet] -
[Airplane mode].
Set [Airplane mode] to [Off], and then;
Set [Wi-Fi] to [On] (for wireless LAN).
Set [Cellular] to [On] (for wireless WAN).
Set [GPS] to [On] (for wireless WAN).
8 Update the on-screen manual
A
Connect to the internet.
Sign in /
Log on to Windows as an administrator.
For further information, refer to Connect to a network.
B
Update the on-screen manual.
Double-click the [Panasonic PC Settings Utility] on the
desktop screen, and then click [Support] - [Manual] -
[Launch Manual Selector].
Double-click [Manual Selector] on the desktop.
Follow the on-screen instructions.
9 Create a recovery disc
A recovery disc allows you to install OS and restore its factory
default condition, in case, the recovery partition of the HDD is
damaged.
We recommend creating a recovery disc before you begin using
the computer.
Refer to
è
Reference Manual
“Recovery Disc Creation Util-
ity” about creating the disc.