CD Player/Receiver Model: CQ-C1103U Operating Instructions ¡Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product and keep this manual for future reference.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 3 Before Reading These Instructions Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 4 Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. U.S.A. PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 5 Preparation The 12-hour system is used for the clock. 1 Turn the ignition switch until ACC ON the accessory indicator lights. Press [SRC] (PWR: Power). 2 3 Press [DISP] (CLOCK). 4 Press [DISP] (Display) to change the display. Display off Clock display Hold down [DISP] (CLOCK) for more than 2 seconds. 5 Adjust the hour. [[]: sets the hour ahead. []]: sets the hour back. 6 Press [DISP] (CLOCK).
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 6 Cleaning the Unit Maintenance Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents. Fuse If the replaced fuse fails, contact your nearest authorized Panasonic Servicenter. Warning ¡ Use fuses of the same specified rating (15 A).
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 7 Safety Information ■ Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 8 Caution Observe the following cautions when using this unit. ❑ Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. ❑ This unit is designed for use exclusively in automobiles. ❑ Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the battery.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 9 General [D•M] (Direct Memory) tunes into the station memorized in D•M. (Hold down it for more than 2 seconds to memorize the current station.) [VOL] (Volume) (Turn) [MUTE] toggles mute on/off. lights when mute is on. [SRC] (Source) [SQ] (Sound Quality) selects a source. selects a sound type (SQ). (PWR) (Power) toggles power on/off. Power On/Off SQ (Sound Quality) Turn your car's ignition switch to the ACC or ON position.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 10 Audio Setting [DISP] (Display) exits from the audio menu. [VOL] selects a value in the audio menu. (PUSH SEL) (Push to Select) selects items in the audio menu. 1 Display the audio menu. Note: If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjustment), the display returns to the regular mode. 2 Select a mode to be adjusted. 3 Adjust. Press [VOL] (PUSH SEL: Select). Press [VOL] (PUSH SEL: Select).
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 11 Radio (AM/FM ) [BAND] selects a band in the radio source. (APM) (Auto Preset Memory) executes APM in the radio source. (Hold down it for more than 2 seconds) [D•M] (Direct Memory) tunes into the station memorized in D•M. (Hold down it for more than 2 seconds to memorize the current station.) [DISP] (Display) switches the information on the display. [SRC] (Source) selects a source.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 12 lights while receiving an FM stereo signal. Radio Mode Display Frequency Band Preset Number Radio mode display (Default) Clock display lights while receiving the D•M (Direct Memory) station. Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively. Preset stations can be simply called up by pressing one of the preset buttons from [1] to [6]. Station Preset Display change Press [DISP] (Display) to change the display.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 13 Disc Player Disc slot takes a disc in with the label-side facing up. Note: The power will be turned on automatically when a disc is loaded. (y / 5) (Pause/Play) toggles pause/play in the player source. [TRACK s] [TRACK d] skip to the previous/next track in the player mode. Hold down either of them for fast reverse/fast forward. [u] (Eject) ejects the disc. Printed side up [DISP] (Display) switches the information on the display.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 14 Player Mode Display Random indicator Play time Display change Track Press [DISP] (Display) to change the display. Player mode display (Default) lights when a disc is in the player. Repeat indicator Clock display Random, Repeat, Scan Random play All the available tracks are played in a random sequence. Hold down [REP] (RANDOM) for more than 2 seconds. The first 10 seconds of each track is played in sequence.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 15 Troubleshooting If You Suspect Something Wrong Check and take steps as described below. If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Servicenter. The product should be serviced only by qualified personnel. Please refer checking and repair to professionals.
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 16 Memorandum
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 1 Specifications General FM Stereo Radio Power supply Current consumption Maximum power output Tone adjustment range Suitable speaker impedance Pre-amp output voltage Output impedance Dimensions (W x H x D) Weight : 12 V DC (11 – 16 V DC), test voltage 14.4 V, negative ground : Less than 2.2 A (CD mode; 0.5 W x 4 channels) : 50 W x 4 channels (at 1 kHz), volume control maximum : Bass: ±12 dB at 100 Hz, Treble: ±12 dB at 10 kHz :4 – 8 Ω : 2.
