Datasheet

CQ-C8405U/C8305U
English
13
Note: Adjust the clock when “ADJUST” appears on the
display.
1
Press [MENU] to display the menu
display.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
2
Press []] or [[] to display the
DISPLAY menu.
3
Turn [VOL] to select “CLOCK ADJ”.
For using the remote control, use [}] or [{].
4
Press [PUSH SEL], and the clock
adjustment screen appears.
For using the remote control, use [BAND] (SET).
5
Adjust the setting value.
[
[] : Adjusting minutes
[]] : Adjusting hours
q : Forward
w :
Backward
6
Press [PUSH SEL], and the menu
screen resumes.
For using the remote control, use [BAND] (SET).
7
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
You may need to set the following depending on the
devices to be connected.
Using Subwoofer
¡ Subwoofer level adjustment (a page 28)
¡ Subwoofer low pass filter (a page 28)
Note: Other settings are required when a Sirius receiver,
an XM receiver, or a Hands-Free Phone System is
connected. (a System Upgrade Guidebook)
The following functions are activated when the Security
Function is ON. (a page 29)
¡ The security indicator lights up when removing the
face plate.
¡ The alarm sounds and the message appears on the
screen to warn you to remove the face plate at ACC
off.
Security Indicator
Preparation
Security Function SettingOther SettingsClock adjustment
C8405U_OI_01_eng.qxd 06.11.6 10:26 AM ページ13