® WMA MP3 CD Player/HD-Radio Receiver with Full Dot Matrix Motorized Display CQ-CB8901U ® Operating Instructions CQ-CB8901U SRC CQ-C8401U TEXT Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.
Safety Information ponents of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. Warning This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death.
Service and Warranty U.S.A. The following applies only in the U.S.A. Caution THIS PRODUCT IS A CLASS I LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Before Reading These Instructions Features Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company.
Contents Features What is HD Radio™? While HD Radio™ will bring you pristine audio quality, it will also provide data services*. Both AM and FM HD Radio™ stations will transmit song and artist title, traffic updates, weather alerts, news reports and much more. For more information, visit www.hd-radio.com. Stay tuned! HD Radio is a trademark of iBiquity Digital Corporation. HD Radio broadcasts can be enjoyed only in those areas in the United States where the broadcasts can be received.
Controls Layout Note: This instruction manual explains operations for use with the buttons on the main unit.
Preparation SRC CQ-CB8901U Security Function Setting 1 Set your car's ignition switch to the ACC or On position. (DEMONSTRATION) First Time Power On The demonstration screen appears. 2 Press [DISP] (Display). The demonstration screen is cancelled, and no more appears. 3 Press [SRC] (PWR: Power). Note: If you would like to turn on the power and make the demonstration message appear, hold down [SRC] (PWR: Power) for 4 sec. or more after turning off the power in other than the XM mode.
General This chapter explains how to turn on or off the power, how to adjust the volume, etc. Open/Eject Hold down [SRC] (PWR) until you hear a beep, then release it. Note: The ending screen appears. You can change the ending screen (moving image). (a page 37) 2 Put the face ] (OPEN). When a disc is already loaded, the disc will automatically be ejected. (OPEN/CLOSE, TILT) Power off You can remove the face plate to prevent it from being stolen.
General Radio The display changes as follows every time [DISP] is pressed. Note: The graphic pattern and still image are selectable. (a page 36) CQ-CB8901U SRC At power-on: Auxiliary (AUX 2) FM1, FM2, FM3, AM (a page 20) CQ-CB8901U SRC Mode When connecting CD Changer, DVD Changer (a page 30, 32) Display OFF All displays disappear in 5 seconds. Folder hierarchy (MP3/WMA only) When connecting a device that is not controlled by with this unit.
General The sound type each of which is adjusted with 7 bands changes every time you press [SQ]. SRC You can make fine adjustments to the currently selected SQ presetting in ROCK, POP, VOCAL, JAZZ, or CLUB in accordance with your car type or taste. CQ-CB8901U SRC CQ-CB8901U 1 Hold down [SQ] (Sound Quality) for 2 sec. or more. 1. FLAT (default) 4 Hold down [}] or [{] for 2 sec. or 6. CLUB more to confirm your adjustment. 2 Adjust each frequency. 5.
Radio This chapter explains how to listen to the radio. SRC Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively. Preset stations can be simply called up by pressing [}] (P·SET) or [{] (P·SET). Notes: ¡ Direct selection can be executed with [1] to [6] buttons on remote control. ¡ Preset stations are changeable. CQ-CB8901U radio mode. 2 Press [BAND] to select a band. []] (TUNE): Lower [[] (TUNE): Higher Note: Hold down for 0.5 sec. or more and release for station search.
CD Player ] (OPEN) to open the face plate. CQ-CB8901U up. The face plate closes automatically, and the unit recognizes the disc and starts playing automatically, too. Printed side 3 Select a desired portion. Random and Repeat play can be set. Track selection [7] (TRACK): Next track [6] (TRACK): Preceding track (press twice) When a disc is already loaded, press [SRC] (Source) to select the CD mode. Note: Hold down for fast forward/reverse. Pause Press [BAND] (h / 5). Press again to cancel.
MP3/WMA Player plate. When a disc is already loaded, the disc will automatically be ejected. Operation Flow up The face plate closes automatically, and the unit recognizes the disc and starts playing automatically, too. (It may take several minutes to start for a disc that has a lot of files.) Printed side 3 Select a desired portion.
MP3/WMA Player Notes: ¡ MP3/WMA encoding and CD writing software is not supplied with this unit. Points to remember when making MP3/WMA files Notes on MP3/WMA Common ¡ High bit rate and high sampling frequency are recommended for high quality sounds. ¡ Selecting VBR (Variable Bit Rate) is not recommended because playing time is not displayed properly and sound may be skipped. ¡ The playback sound quality differs depending on the encoding circumstances.
XM Tuner The optional XM receiver allows you to receive the XM radio service. You can toggle the category on and off every time you hold down [BAND] for 2 sec. or more. If the category is set to on, the unit operates as follows for each button: Note: “LOADING” is displayed when it takes for 2 sec. or more to receive the XM satellite radio. 2 Press [BAND] to select a band. required to use an optional extension cord (XMDPAN100) that is produced by XM exclusively for Panasonic products.
Disc Changer (When CDs or MP3 discs are loaded) Connected an optional CD changer or an optional DVD changer can be controlled by this unit. CQ-CB8901U SRC 2 Select a desired portion. Disc selection [}]: Next disc [{]: Preceding disc Track selection [7]: Next track/file [6]: Preceding track/file (press twice) Note: Hold down for fast forward/reverse. Pause Press [BAND] (y / 5). Press again to cancel.
Disc Changer (when DVDs or VCDs are loaded) Connected an optional DVD changer (CX-DH801U) can be controlled by this unit. 1 Load a magazine (discs). When a magazine is already loaded, press [SRC] (Source) to select the DVD changer mode. CQ-CB8901U SRC Notes: ¡ Please connect a CD changer or a DVD changer to AUX 2. ¡ “AUX 2” is display when connecting a changer that is not compatible with this unit. 2 Select a desired portion.
Audio Setting Function Setting (SEL: Select) to display the AUDIO menu display. 2 Press [VOLUME] (SEL: Select) to select a mode to be adjusted. 3 Turn [VOLUME] clockwise or counterclockwise to adjust. AUDIO Menu Display Note: If no operation takes place for more than 10 seconds in the audio menu (2 sec. in Main volume adjustment), the display returns to the regular mode. SQ preset change For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.
Display Setting Customize the Display (Customize Function) Adjustment to display on the DISPLAY menu play. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. CQ-CB8901U Still image setting (Setting range: 11types, Default: All) Switching by []] or [[] Preparation: Put the CD-R/RW that contains data to be customized in hand. Sequential display from pattern 1 to 10 No.1-10 ALL: 1 If there is a disc inside, take out the disc.
Note on Download Service At Customizing The download service may be suspended or stopped without advance notice. The download service is not available in some areas. Please visit the site below for further information. Panasonic Web site: (http://www.panasonic.co.jp/global/) Notes on IMAGE STUDIO Download site: ¡ This download service is not available in some areas. For details, please access the Panasonic website. ¡ IMAGE STUDIO is available only by downloading from the address below.
Troubleshooting The sound field is not clear in the stereo mode. Central sound does not settled. The power fails unintentionally. Poor reception or noise There is a break, a short circuit, poor contact or wrong wiring regarding the speaker wiring. a Check the speaker wiring. The number of auto preset stations is less than 6. Radio Seeking takes too long. 40 CQ-CB8901U The number of receivable stations is less than 6.
MP3/WMA No playback or disc ejected Problem Possible cause a Possible solution Possible cause a Possible solution The disc has unplayable formatted data. a Refer to the description about MP3/WMA for playable sound data except CDDA (i.e. music CD). Disc is dirty, or is upside down. The unit plays back the ROM track of a MIX mode CD. a Skip the ROM track. Disc has scratches. The CD-R/RWs that are playable on other devices are not playable on this unit.
Installation If you use commercial CDs, they must have either of these labels shown at right. Some copy-protected music CDs are not playable. WARNING TEXT ❐ This installation information is designed for professional installers with ¡ Do not touch the underside of the disc. ¡ Do not scratch on the disc. ¡ Do not bend the disc. ¡ When not in use, keep disc in the case. Printed side Do not use irregularly shaped discs.
Installation ¡Never use bolts or nuts from the car's safety devices for installation. If bolts or nuts from the steering wheel, brakes or other safety devices are used for installation of the monitor, it may cause an accident. Before Installation ¡Attach the wires correctly. If the wiring is not correctly performed, it may cause a fire, failure of electrical equipment and-or an accident.
Installation Installation Item Diagram Cautions: ¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries. ¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers. Q’ty q Mounting Collar 1 w Mounting Bolt (5 mmø) 1 e Power Connector 1 First complete the electrical connections, and then check them for correctness.
Installation Cautions ¡This unit is designed for use in a car having a 12 V negative ground battery system. ¡To prevent damage to the unit, be sure to follow the connection diagram below. ¡Strip about 5 mm of the lead ends for connection. ¡Do not insert the power connector into the unit until the wiring is completed. ¡Be sure to insulate any exposed wires to prevent short circuiting with the car chassis. Bundle all cables, and prevent cable terminals from touching any metal parts.
Installation Installation ¡For connection to a CD changer (CX-DP880) or DVD changer (CX-DH801U), refer to the operating instructions of corresponding device. ¡For details, consult the shop where you purchased this product. Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers. ¡Use ungrounded speaker only. ¡The maximum speaker input should be 50 W or more.
Power Supply Tone Controls (Bass/Treble) Equalizer Center Frequency Variable Range of Equalizer Current Consumption Maximum Power Output Speaker Impedance Pre-amp output voltage Subwoofer-output voltage Pre-amp output impedance Subwoofer-output impedance Dimensions (Main Unit) Weight (Main Unit) DC 12 V (11 V - 16 V), Test Voltage 14.4 V, Negative Ground Bass; ±12 dB at 62 Hz, Treble; ±12 dB at 16 kHz 60, 160, 400, 1 k, 3 k, 6 k, 16 k (Hz) -12 dB to 12 dB (2 dB step) Less than 2.2 A (CD mode, 0.
