Operating Instructions - Language - English
12 13
3
E
N
G
L
I
S
H
4
E
N
G
L
I
S
H
CQ-C3300/C3100A/C3100G/C3100VNCQ-C3300/C3100A/C3100G/C3100VN
AF
DISP
HDB
S
PWR
S
O
U
R
C
E
T
A
MUTE
CQ-C3300N
SCROLL
R
A
NDOM
SC
A
N
REPE
A
T
DISC /
FOLDER
123456
TUNE
TRACK
OPEN
BAND
APM
PTY
REG
VOLUME
PUSH
SEL
DISP
General
Volume
Note:
¡ The volume level can be set independently for each
source. (For radio, one volume setting for AM, one vol-
ume setting for all FMs)
S·HDB (Super High Definition
Bass)
With music genres like rock music, the bass-sound will be
more powerful.
Default: S·HDB OFF
Press [S·HDB].
: S·HDB off
: The bass sound of the speakers
are moderately emphasized.
: The bass sound of the speakers
are strongly emphasized.
Mute/Attenuation
ON : Press [MUTE].
OFF : Press [MUTE] again.
You can select mute or attenuation when [MUTE] is
pressed. (a Page 32)
Clock Display
When the power is set to OFF and ACC is set to ON, press
[DISP].
(Clock time)
(Display off)
When the power is set to ON, refer to the description for
each source mode.
Clock Setting
The 24-hour system is used for the clock.
Note:
¡ Adjust the clock when
“
NO CT
”
appears on the screen.
Select the radio AM mode. (a Page 14)
Press and hold [DISP] for more than 2 seconds.
Adjust the hour.
[[]: put forward hour.
[]]: put back hour.
Press [DISP].
Adjust the minute.
[[]: put forward minute.
[]]: put back minute.
Press [DISP].
Note:
¡ When a broadcast of FM Radio Data System is received,
the clock is put right automatically by the Clock Time
service. (a Page 16)
Up
Down
[]][[]
(Adjustment)
[S·HDB]
[DISP] (Display)
[MUTE] (Mute/attenuation)
Default: 18
Setting Range : 0 to 40
indicator
[SOURCE] (PWR: Power)
Power
Turn your car's ignition key to the ACC or ON position.
ON: Press [SOURCE] (PWR).
OFF: Press [SOURCE] (PWR) again and hold for
more than 1 second.
Note:
¡ If the security function is set to ON, the security mes-
sage is shown with a warning alarm. (Default: S-LED
ON)
(a Page 34 about Security Function setting)
ACC Selection
If your car has the ACC position on the ignition
switch, set the ACC selection to ON. (Default: ACC
OFF)
(a Page 36)
is attached to the functional descriptions
under the ACC selection ON condition.
Demonstration Message
When the power is switched on for the first time, a
demonstration message appears on the display.
Press [DISP] to change to regular mode.
Scrolling....
Note:
¡To display the message again, press and hold
[SOURCE] for more than 4 seconds when turn-
ing power on.
Source
Press [SOURCE] to change the source.
3CQ-C3300N
Radio
(
a
Page 14)
CD Player
(
a
Page 23)
OR
MP3/WMA Player
(When a MP3/WMA data disc is
in the player.
a
Page 24)
CD Changer
(When an optional CD changer is
connected.
a
Page 28)
3CQ-C3100A/C3100G/C3100VN
Radio
(
a
Page 14)
CD Player
(
a
Page 23)
ACC ON
ACC ON
Remote control sensor (a Page 11)
[VOLUME]
Level Meter (a Page 34)