Operating Instructions - Language - English

22
CQ-C8400/8300W
CQ-C8400/8300W
23
General (continued)
Open the Front Panel
Press [<: eject] (OPEN).
Note:
≥ If nothing is changed for 20 seconds, the original
panel position will be recovered.
Close the Front Panel
Press [<: eject] (OPEN) again.
[MENU] (DIM) [<: eject]
(OPEN/TILT)
Panel Angle (Tilt)
Press and hold [<: eject] (TILT) until you hear a
beep (about 1 second) from the speaker output, and
“TILT” is displayed. And then release it.
Set it to the position at which it is easy to read what
is on the display.
Each time the above operation is repeated, the panel
angle changes in the sequence shown below.
Dimmer
Press and hold [MENU] (DIM) for more than
2 seconds to change dimmer level setting as
follows.
Brighter (default)
Medium
Darker
[SQ] (Sound Quality)
Note:
≥ The position which has been set using TILT will
be retained even when the operations below are
performed.
• OPEN/CLOSE • ACC on/off
E
N
G
L
I
S
H
4
E
N
G
L
I
S
H
3
TILT 1
TILT 2
TILT 3
Open
TILT OFF
(default)
SQ (Sound Quality)
SQ is a function that can call up various sound
types at the touch of button in accordance with your
listening music type.
At SQ7, SQ presets 2 to 6 can also be fi nely
adjusted to suit the acoustic characteristics inside
the car and the user’s preference (page 42).
Press [SQ] to select a sound types
as follows.
SQ7 lights (except FLAT).
Flat frequency response
not emphasize. (default)
Prevention of excessive
equalizing and capability
to cover wide variety of
music. Listener-friendly
and crisp sound.
Sharp and dynamic
sound. Powerful deep
bass and turgescent
treble.
Highlighted vocals
that are apt to be
overwhelmed by
instrumental sound.
Sound with emphasis on
sharpness of high-hat
and echo of saxophone.
Jazz-specifi c deep
sound.
Reproduction of realism
being in a club.
FLAT
ROCK
POP
VOCAL
JAZZ
CLUB
≥ If [<: eject] (OPEN) is pressed when a
disc is in the player, the front panel opens
and the disc is ejected automatically.
If no operation takes place for 20 seconds, the
disc is automatically retracted into the main unit.
Note:
≥ If no operation takes place for more than
5 seconds, the display returns to the regular mode.
≥ Setting of SQ, bass/treble and volume are
infl uenced one another. If the infl uence mentioned
above causes distortion to the audio signal,
readjust bass/treble or volume (page 42).
≥ After pressing [SQ] on the main unit, you
can also select a sound type by pressing
the preset buttons [1] to [6].
Press [DISP] (display) to return to the regular
mode.
Display Change
Press [DISP] (display).
∫ When Power is ON
Mode display
Folder hierarchy display
(MP3/WMA only)
Mode and Moving
picture display/
SA display (page 47)
Moving picture/
SA display (page 47)
Mode and Still picture
display
Still picture display
Mode and clock display
Display and light off
Clock display
Display and light off
∫ When Power is OFF
Note:
Displays before adjusting the clock (page 15).
≥ Set the background display (GRAPHIC PATTERN,
STILL IMAGE) in a separate procedure (page 46).
≥ “––:––” will appear before adjusting the clock on
the right corner of the mode display.
[DISP]
(Display)
Caution:
≥ Keep your fi ngers and hands away from the
front panel when the panel is in motion.