Operating Instructions - Language - English

CQ-C9800N/C9700N
3130
Audio Setting
Adjustment to each speaker and an optional subwoofer
CQ-C9800N/C9700N
Main volume adjustment
(Setting range: 0 to 40, Default: 18)
q : Up
w : Down
Dynamic Control (Bass)
(Setting range: OFF, LV +1 to LV+10, Default: Bass LV+1)
q : Up
w : Down
Dynamic Control (Treble)
(Setting range: OFF, LV +1 to LV+10, Default: Treble
LV+1)
q : Up
w : Down
Note: Do not activate SQ and DC (bass/treble) at the
same time to avoid causing sound distortion.
Balance adjustment
(Setting range: L15 to R15 and Centre, Default: Centre)
q : Right enhanced
w : Left enhanced
Fader adjustment
(Setting range: R15 to F15 and Centre, Default: Centre)
q : Front enhanced
w : Rear enhanced
Subwoofer level adjustment
(Setting range : mute ( - ∞), - 6 dB to +6 dB, 2 dB Step,
Default: 0)
q : Up
w : Down
Subwoofer Low Pass Filter
(Setting range: Filter OFF,60 Hz to 160 Hz, 5 Hz Step,
Default 120 Hz)
q : Up
w : Down
High Pass Filter
(Setting range: Filter OFF, 90 Hz to 225 Hz, 5 Hz Step,
Default: Filter OFF)
q : Up
w : Down
Subwoofer output range
Other speakers output ranges
Audio Setting
1
Press [VOLUME]
( SEL : Select) to
display the menu
display.
2
Press [VOLUME] ( SEL : Select) to select
a mode to be adjusted.
3
Turn [VOLUME]
(Volume) clock-
wise or counter-
clockwise to
adjust.
Note: If no operation takes place for more than 5 sec. in
the audio menu (2 sec. in Main volume adjustment and
10 sec. in the SQ preset change operation), the display
returns to the regular mode.
Audio Setting
English
AUDIO Menu Display
You can make a fine adjustment of SQ and Position.
1 Hold down [SQ] (Sound Quality) for 2
sec. or more to display the audio menu
display.
2
Press [}] or [{] to select a function to
be adjusted.
3
Press [BAND]
(SET) to adjust.
4
Adjust the setting value.
If no operation takes place for more than 10 seconds
in the audio menu, the display returns to the regular
mode.
SQ ADJUSTMENT
You can make a fine adjustment to the currently selected
SQ presetting in each type (except FLAT).
[]][[]: Frequency band selection
qw: Frequency selection
[
}][{]: Level up/down
[
BAND]: SQ preset No. selec-
tion
Notes:
¡ Please go on to the SQ preset memory operation if
necessary.
¡ If you hold down [BAND] for 2 sec. or more, the pre-
setting that is called up can be turned into the default.
¡ Do not activate SQ and DC (bass/treble) at the same
time to avoid causing sound distortion.
SQ PRESET MEMORY
The current value is assigned to one of SQ preset 2-6.
[}][{]: SQ preset No. selection
[BAND]: Value writing (holding down for 2
sec.)
Note: You can also select the SQ preset number by
pressing [2]-[6] on the remote control, and assign the
current value to the selected preset number by holding
down the same button for 2 sec. or more.
POSITION
You can make the optimal sound field in accordance with
your seat.
[]][[]: Position selection
OFF [a FR [a FL [a F-ALL [a R-ALL [a (Back
to OFF)
CQ-C9800N
BANDBAND