Operating Instructions - Language - English

CQ-C9901U/C9801U/C9701U
31
English
30
XM Tuner
(XM Direct
TM
receiver)
An optional XM Direct
TM
receiver allows you to receive the XM radio service.
Note: A changer and an XM Direct
TM
receiver are not connectable at the same time.
CQ-C9901U/C9801U/C9701U
1
Press [SRC] (Source) to select the XM
tuner.
2
Press [BAND] to select a band.
Preparation:
¡ Connect the optional XM Direct
TM
receiver
(XMD1000).
¡ To connect the XM Direct
TM
receiver
(XMD1000), it is required to use an optional
extension cord
(XMDPAN100) that is produced
by XM exclusively for Panasonic products.
Notes:
¡ “RADIO ID” is displayed with channel 0.
¡ “UPDATING” is displayed during the update of the
identification code.
¡ “LOADING” is displayed during the acquisition of
audio data or information.
3
Select a station.
Channel selection
[]] (TUNE): Preceding channel
[[] (TUNE): Next channel
Preset station selection
[{] (P·SET: Preset): Lower preset channel
[}] (P·SET: Preset): Higher preset channel
Note: Direct Access can be executed with [1] to [6]
buttons on remote control.
1
Press [MENU] to
display the menu
display.
For using the remote
control, hold down
[MENU] for 2 sec. or
more.
2
Press [}] or [{] to select a mode to be
adjusted.
3
Press [BAND]
(SET) to adjust.
4
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [MENU]
for 2 sec. or more.
TEXT
Text display
: Enabled (default)
: Disabled
TEXT Setting (XM Tuner Menu Display)
(TEXT)
Operation Flow
SRC
CS
SRC
You can toggle the category on and off every time you
hold down [BAND] for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Channel selection
[]] (TUNE): Preceding channel in current category
[[] (TUNE): Next channel in current category
Category selection
[{] (P·SET: Preset): Preceding category
[}] (P·SET: Preset): Next category
Selection by Category
(P·SET: Preset)
SRC
CS
Band
Channel number/namePreset Number
Artist name/Song title Indicates the intensity of
the radio wave.
Indicates the satellite tuner
is ready.
Channel Preset
(P·SET: Preset)
Up to 6 channels can be preset in XM1 to XM3.
Preset channels can be simply called up by pressing
[}] (P·SET) or [{] (P·SET).
Note: Direct Access can be executed with [1] to [6]
buttons on remote control.
1
Tune in to a channel.
2
Hold down [}] or [{] for 2 sec. or
more.
3
Select a preset number by pressing [}]
or [{].
4
Preset the channel by holding down [}]
or [{] for 2 sec. or more.
channnel name/preset number blinks once.
Notes:
¡ New channels overwrite existing saved stations.
¡ In step 2, a channel can be registered by holding
down the numeric button [1] to [6] on the remote
control unit for 2 sec. or more.
¡ To stop presetting, press [DISP] (Display).
Direct Access
A channel can be directly selected.
Example: channel number 5
1
Press [#] (NUMBER).
2
Press [5].
3
Press [SET].
Note: To suspend direct selection, press [DISP]
(Display).
Functions only by
remote control unit
Lights when category is activated.
XM Tuner (XM Direct
TM
receiver)
XM mode display