Operating instructions
Ex1.To select the last program,
press [3] (TPS) and
[1] twice.
Ex2.To select the next program,
press [3] (TPS) and
[2].
V
O
L
VOL
V
O
L
S
E
L
SELS
E
L
TUNE
TRACK
P
R
G
CQ-FX323W
CASSETTE RECEIVER WITH CHANGER CONTROL
OPENOPENOPEN
LEVEL
DISP
CLOCK
super bright display with level meters
SCAN
RANDOM
4
LOUD
APM
1
2
MTL
NR
3
TPS
B·S
REP
56
REPEAT
DISC
MUTE
R
E
M
O
T
E
P
W
R
M
O
N
O
/
L
O
C
S
O
U
R
C
E
B
A
N
D
DIMMER
Caution: Do not insert a tape when (tape indicator)
lights because a tape is already inserted.
Tape Insert and Playback
q Open the front panel.
w Insert a cassette tape.
e Close the front panel manually.
Play back will start automatically.
Stop and Tape Eject
q Open the front panel.
w Press [u] to stop tape play and eject the cassette tape.
e Close the front panel manually.
[u] Eject
VOL
SEL
TUNE
TRACK
OPEN
LEVEL
13
CQ-FX323W
1
E
N
G
L
I
S
H
12
7
E
N
G
L
I
S
H
CQ-FX323W
8
Metal Tape Mode
¡Press [1](MTL) when playing metal or chromium
dioxide (CrO
2
) tapes.
¡Press [1](MTL) again to cancel.
Note: Playing Normal tapes in MTL mode causes
high frequency imbalance, which affects tone quality.
Dolby Noise Reduction
¡Press [2](NR) to set the Dolby B NR mode.
¡Press [2](NR) again to cancel.
Note: Set the Dolby B NR mode when playing back
a tape recorded with Dolby B Noise Reduction.
B
MTL
Repeat Play
¡Press [6](REP) to repeat the current
program.
¡Press [6](REP) again to cancel.
Blank Skip
¡Press [5](B • S) to skip unrecorded portions
longer than 15 seconds on the tape.
¡Press [5](B • S) again to cancel.
Note: When repeat is on, the blank skip does
not work because the repeat has priority over
the blank skip.
B-SKIP
REP
Tape Program Search (TPS) Operation
q Press [3](TPS) to activate the Tape Program Search mode.
w To select a desired program, press [2] or [1]
corresponding times to go forward (up to 9)
or backward (up to 8).
e Press [3](TPS) again to cancel.
(Fast forward:)
1 s9
(Rewind:)
8t 0
Note: The TPS mode may not work correctly in the following cases. This, however, does not mean that the unit is
defective.
¡There is an interval less than 3 seconds or having a high level of noise or hum between programs.
¡There is particularly low-level passage during the program.
Tape indicator lights when
a tape is inserted.
CQ-FX323W
C
D
M
D
Cassette Tape Player
Listening to a Cassette Tape
Rewind and Fast Forward
Press [2] or [1] to activate fast forward or
rewind of the tape.
Press [BAND] (PRG) to resume the tape play.
Play Side Change
Press [BAND] (PRG) to reverse.
Top Side Playing
Bottom Side Playing
Source
Radio
Cassette Tape Player
(When a Tape is inserted)
CD Changer control
(When a CD Changer is connected)
Note: To maintain your cassette player in top condition,
avoid using tapes that are longer than 90 minutes (C-90).
Notes on Cassette Tape
Tape Slack:
Use a pencil or similar object to take up the slack as shown. If
a loose tape is used, this may result in the tape becoming tan-
gled in the rotating parts of the unit.
Mode Selection
Press [SOURCE] to change to Cassette tape play
mode.
Cautions:
¡When the front panel is opened, do not force it down and
do not put anything on it since these may result in damage
to the unit.
¡When ejecting a cassette tape, do not close the front panel
until the cassette tape is ejected and removed from the
cassette slot completely.
¡Do not pinch your finger or hand in the front panel.
¡Do not insert foreign matters into the tape slot.
Exposed tape
end (Open end)
Pencil
Do not touch or
pull out the tape.
Open
Exposed tape
end(Open end)
[1]:Rewind (To cancel,press [2])
[2]:Fast forward (To cancel,press [1])
[1]:Fast forward (To cancel,press [2])
[2]:Rewind (To cancel,press [1])
Top Side Play
Bottom Side Play