Operating Instructions - Language - English
E
N
G
L
I
S
H
2
9
E
N
G
L
I
S
H
1
8
Sirius Control
Preparation:
≥ Connect the Sirius receiver (CR-SRT100, option).
≥ Set the Sirius setting to SET ON.
≥ Sirius satellite radio is available on a chargeable
basis.
≥ The CA-CD55, available separately as an optional
accessory, is required to connect the CD chang-
er and the Sirius receiver for your listening en-
joyment at the same time.
Note:
≥ The receivable area of Sirius broadcasting is lim-
ited.
≥ Refer to the operating instructions for Sirius re-
ceiver for details.
≥ If the Sirius receiver and CD changer have been
connected, operation will not be switched to the
CD changer mode using [BAND]. Instead, press
[SOURCE] to switch to this mode.
Sirius control mode display
Lights when the Sirius setting is SET ON.
Sirius Mode
(When a Sirius receiver is connected and
Sirius setting is SET ON.)
Press /[SOURCE] to change to the
Sirius mode.
SOURCE
1
Band
Channel number
Band
Press [BAND].
2
Channel Selection
/[$]: Up
/[%]: Down
Press and hold /[%] or [$] for
more than 0.5 seconds to change channels
rapidly.
3
Example: channel number 10
1 Press [„].
2 Press [1] [0].
3 Press [SET].
Note:
≥ Press [DISP] (display) to return to the regular
mode.
Press /[#] or ["].
The first channel in a selected category is received.
The category name is displayed after the channel
number.
Note:
≥ When the category is changed, ON will be set au-
tomatically for the category priority setting.
Note:
≥ Existing saved stations are overwritten with new
stations after this procedure above.
1 Select a band. (previous page)
2 Press [1] to [6].
Caution:
≥ To ensure safety, never attempt to preset stations while you are driving.
≥ Do not watch the scroll display while driving a car.
Direct Channel Selection
Category Selection
Up to 6 channels can be saved in the SR1, SR2 and
SR3 preset station memories.
1 Select a band and channel. (previous page)
2 Press and hold [1] to [6] for more than 2 sec-
onds to memorize.
CATETUNE
SOURCE DISPLAY
(Category)
(Tune)
or
Preset number
Press /[DISP] (display).
DISPLAY
Channel number
(Default)
Channel number
Category name
Channnel name
Artist name
Song title
Clock display
Display Change
Displays when there is no text.
Preset Station Calling
Press and hold
/[DISP] (display)
for more
than 2 seconds to have an another circle scroll
while a text is displayed.
DISPLAY
or
Manual Preset Memory
S
E
T
S
E
T
PWRPWRPWR BANDBANDBAND
FACEFACEFACE SS
•
AS
•
A
DISPDISPDISP DIMDIMDIM
MENUMENUMENU
RETRETRET
11222333
44555666
77888
00
99
##
MUTEMUTEMUTE
SCANSCANSCAN
DIMMERDIMMERDIMMER
RANDOMRANDOMRANDOM
NUMBERNUMBERNUMBER
REPEATREPEATREPEAT
RETURNRETURNRETURNSOURCESOURCESOURCE
VOLVOLVOL
Car AudioCar Audio
[%] [$]
(channnel)
[#] ["]
(category)
[SET]
[SOURCE]
[DISP]
(display)
[„]
(NUMBER)
[0] to [9]
[BAND]