Operating Instructions - Language - English

E
N
G
L
I
S
H
6
13
E
N
G
L
I
S
H
5
12
Troubleshooting Electrical Connections
Troubleshooting Tips
Sirius Control
Display Cause/Step
Note:
For details, refer to the operating instructions for the Sirius receiver used.
Users registration has not been carried out.
Complete users registration.
Your location is out of receivable areas (e.g. in a tunnel), or the unit is
decoding a selected broadcast. The display appears also while the con-
nections are being checked after the power has been turned on.
Wait until getting out of the unreceivable area or completing the de-
coding.
A channel that is not included in the agreement was selected.
Select a channel that is included in the agreement. Refer to the op-
erating instructions for Sirius receiver with regard to the agreement.
The ID could not be acquired.
Contact your nearest Panasonic Servicenter for service.
When the Sirius receiver fails to operate for some reason.
When SET ON serves as the Sirius setting and the Sirius receiver has
not been connected.
Check the Sirius receivers connections.
The selected channel is invalid.
Select a channel which can be received instead.
CALL 888-539-SIRIUS
TO SUBSCRIBE.
CQ-HX1083U
TWIN CD
.
C-CONT
CD.C-IN
Sirius receiver
(CR-SRT100, option)
CQ-HR1003U
Ground lead
6
Power connector
Changer 2
connecting
cord
CD changer
input cord
DIN extension cord
(supplied with CA-CD55)
(Brown/white Stripe)
Dual CD changer control lead
L (white)
R (red)
L (white)
R (red)
RCA cord
(supplied with CA-CD55)
Dual changer
output cord
Changer 1
connecting
cord
DIN cord DIN cord
RCA cord
RCA cord
(option)
Fuse (3 A)
Battery lead
Dual changer
control unit
(CA-CD55, option)
CD changer
(CX-DP88U, option)
Extension cord
(supplied with CR-SRT100)
Extension cord
(supplied with CX-DP88U)
Example combination
Sirius receiver (CR-SRT100, option)
CD changer (CX-DP88U, option)
Dual changer control unit
(CA-CD55,option)
Note:
For wiring, carefully read the operating in-
structions for the devices connected.