Operating Instructions - Language - English

A (Black)

(Dark blue)

Resistor(1kΩ)

Fuse(12A)

BATTERY

ACC

Cautions:

¡To prevent damage to the unit, be sure to follow the connection diagram below.

¡Strip about 5 mm of the lead ends for connection (only non-ISO connector cords).

¡Do not insert the power connector into the unit until the wiring is completed.

¡Be sure to insulate any exposed wires to prevent short circuiting with the car chassis. Bundle all cables, and prevent

cable terminals from touching any metal parts.

¡This unit can be connected to an optional CD changer (CX-DP9061/DP9060EN, CX-DP88N, CX-DP801/DP803EN or

CX-DP601EN) and optional extension cord.

¡For connection to a CD changer, refer to the operating instructions of the CD changer (CX-DP9061/DP9060EN, CX-

DP88N, CX-DP801/803EN or CX-DP601EN).

A8 : Ground Lead (Black)

To a clean, bare metallic part of the car chassis

A7 : Power Lead (ACC or IGN) (Red)

To ACC power, +12VDC

A4 : Battery Lead (Yellow)

To the car battery, continuous +12 V DC

A5 : (Dark blue)

Motor Antenna Relay Control Lead

(To Motor Antenna) (Max. 500mA)

This lead is not intended for use with a switch actuated power antenna.

Amp·Relay Control Power Lead

This lead is for connection to a Panasonic power amplifier.

CQ-RD152/RD142/RD132N