Operation Manual

8
OFF
/
ON
TEMP
TIMER/CLOCK
MODE
QUIET/
POWERFUL
FAN SPEED
MODE
CHECK RESET
AIR SWING
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
AC RC
TIMER/CLOCK
FA
MODE
AI
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
Weekly Timer Display
Lights up if Timer
operation is selected
6 different programs can
be set in a day (1 ~ 6)
Time to be selected
(10 minutes step)
ON Timer. To automatically switch “ON” the unit.
OFF Timer. To automatically
switch “OFF” the unit.
Day to be selected
Indicates the selected day
WEEKLY TIMER SETTING
WEEKLY TIMER SETTING
Day and Timer Set Up Method
1. Press Timer
MODE
for 4 seconds to change display
to weekly timer.
2. Press Timer
UP
or
DOWN
to select your desired day.
3. Press
SELECT
to confi rm your selection.
4. “1” will be blinking, press
SELECT
to set program 1.
5. Press Timer
OFF/ON
to select ON or OFF timer.
6. Press Timer
UP
or
DOWN
to select your desired time.
If you want to set the timer together with your
desired temperature, press
TEMP
to select the
temperature.
7. Press
SET
to confi rm program 1. The selected day
will be highlighted with .
• After 2 seconds, the display will move to the next
program. Repeat steps 4 to 7 to set programs 2 to 6.
• During timer setup, if no button is pressed within 30
seconds, or if the
SET
button is pressed, the setting at
that moment is confi rmed and timer setup is ended.
OPERATION DETAILS
OPERATION DETAILS
Disable & Enable Weekly Timer
• To disable weekly timer setting, press
MODE
, then press
CANCE
L
.
• To enable previous weekly timer setting, press
MODE
,
then press
SET
.
Indicates the next timer
operation day
• Daily timer and weekly timer could not be set at the
same time.
• Promotes energy saving by allowing you to set up to 6
programs in any given day.
• Same timer program cannot be set in the same day.
Check Current Timer Program
Perform the step below to check the timer program for a
particular day.
1. Press Timer
MODE
to enter timer mode.
2. Press
SELECT
to enter day setting.
3. Press Timer
UP
or
DOWN
until your desired day is shown,
press
SELECT
to confi rm your selection.
4. Press Timer
UP
or
DOWN
to check the set programs.
Modify Current Timer Program or Add New
Timer Program
1. Press Timer
MODE
to enter timer mode.
2. Press
SELECT
to enter day setting.
3. Press Timer
UP
or
DOWN
until your desired day is shown.
4. Perform steps 4 to 7 of “Day and Timer Set Up
Method” to modify existing timer program, or add any
timer program.
Cancel Current Timer Program
Perform the step below to cancel the timer program for a
particular day.
1. Press
SELECT
to enter day.
2. Press Timer
UP
or
DOWN
until your desired day is shown.
3. Press
SELECT
to enter program setting.
4. Press Timer
UP
or
DOWN
until your desired day is shown.
Press
CANCEL
to cancel the program, will disappear.