Operating Manual

CARE AND CLEANING (CONTINUED)

Filter The filter behind the air intake grille should be checked and cleaned at least once

every two weeks.

How to remove the filter 1. Grasp both ends of the air

intake grille, and remove it by

opening towards the front and

pulling towards you.

2. Remove the filter attached to

the rear of the air intake grille.

Cleaning Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter,

wash the filter in lukewarm, soapy water, rinse it in clean water, and dry it.

How to replace the filter 1. With the FRONT mark of the

filter at the front, align the two

indentions near the mark with

the hooks at the rear of the air

intake grille, and then mount

the filter.

2. Allow the edge of the air intake

grille to slide into the top of the

indoor unit, and then insert it

all the way inside.

3. Press in the bottom right and

left corners of the air intake

grille to attach the indoor unit.

Attach so that the round pins at the top right and left corners of the air intake grille

are inserted into the grooves at the top right and left of the indoor unit.

Air intake grille

filter

FRONT mark

Hook

Air intake grille

Groove

Air intake grille

NOTE