Operating Manual

OPERATION WITH THE REMOTE CONTROLLER (CONTINUED)

• Choose the best position in the room for the remote controller, which also acts

as the sensor for room comfort and transmits the operating instructions. Once

you’ve found this best position, always keep the remote controller there.

• This appliance has a built-in 5-minute time delay circuit to ensure reliable

operation. When the operation button is pressed, the compressor will start

running within three minutes. In the event of power failure, the unit will stop.

2. Adjusting the Fan Speed

A. Automatic fan speed Simply set the FAN SPEED selector button to the position.

This automatically sets the best fan speed for the room temperature.

B. Manual fan speed If you want to adjust fan speed manually during operation, just set the FAN

SPEED selector button as desired. [ , , or ]

3. Fan Only

If you want to circulate air without any temperature control, follow these steps:

STEP 1 Press the MODE selector button to switch to the fan mode .

STEP 2 Press the ON/OFF operation button.

STEP 3 Press the FAN SPEED selector button to select the fan speed of

your choice ( , or ).

NOTE

STEP 2

STEP 1

STEP 3