Operating Instructions - Language - English

▲
8
ENGLISH
OPEN
e
r
e
r
OPEN
How to insert batteries
Operating the remote control
Gently press the
place marked
[OPEN] and slide
the cover toward
you.
er Be sure
that the (+) and
(–) directions
are correct.
Set the power switch to “t” (OFF) when:
■ The air conditioner is not going to be used for
an extended period of time.
If the power switch is left at “I” (ON), approximately
3.25 watts of electric power are used even if the main
unit is turned off by remote control.
■ There is a danger of lightning.
The air conditioner is provided with a built-in protective
device, but the control equipment may be adversely
affected depending on the extent of lightning activity.
Regarding the batteries.
■ The batteries can be used for approximately one year.
■ Do not use rechargeable (Ni-Cd) batteries,
because such batteries differ from standard
dry-cell batteries in shape, dimensions and
performance.
■ Be sure to replace the batteries with two new
batteries of the same type.
■ Remove the batteries if the air conditioner is not going
to be used for an extended period of time.
Make sure that the
signal path is not
obstructed.
The maximum dis-
tance at which signals
can be received is
about 10 m.
12 00
:
PM
■ Aim at the signal receptor on the room air condi-
tioner when operating.
■ Do not drop or throw the remote control.
■ Do not place the remote control in a location that
is exposed to direct sunlight or next to a heating
unit or other heat source.
■ Signal received sound:
One short beep or one long beep.
(Two R03 (AAA) dry-cell
batteries or equivalent)
■ Fix the cover to the back of the remote
control (“PM 12:00” will flash in the opera-
tion display.)
If the display does not appear when the batteries
are inserted, remove the batteries and
insert them once more.