Operating Instructions Air Conditioner i AUTO-X POWERFUL Model No. Indoor Unit Outdoor Unit CS-Z7RKR CS-Z9RKR CS-Z12RKR CS-Z15RKR CS-Z18RKR CS-Z21RKR CS-Z24RKR CS-Z28RKR CU-Z7RKR CU-Z9RKR CU-Z12RKR CU-Z15RKR CU-Z18RKR CU-Z21RKR CU-Z24RKR CU-Z28RKR Thank you for purchasing Panasonic Air Conditioner. Installation instructions attached. Before operating the unit, read these operating instructions thoroughly and keep them for future reference.
Provide fast cooling, maximum comfort, clean air and optimise energy saving i AUTO-X Cooling when it counts, Comfort when it matters i AUTO-X with the new Panasonic Thermal Enhancement Technology (P-TECh) is a unique Panasonic compressor control technology which enable compressor to achieve maximum frequency in a short time. i AUTO-X also comes with new AEROWINGS - twin flaps that works dynamically to adjust airflow directions.
Quick guide Table of contents Inserting the batteries 1 2 3 1 Pull out the back cover of remote control 2 Insert AAA or R03 batteries (can be used ~ 1 year) 3 Close the cover Safety precautions ...................4-5 How to use...............................6-7 To learn more... ......................8-9 Cleaning instructions ................ 10 Troubleshooting ........................
Safety precautions To prevent personal injury, injury to others or property damage, please comply with the following: Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classified as below: This appliance is filled with R32 (mild flammable refrigerant). If the refrigerant is leaked and exposed to an external ignition source, there is a risk of fire. WARNING This sign warns of death or serious injury.
Remote control Do not use a modified cord, joint cord, extension cord or unspecified cord to prevent overheating and fire. To prevent overheating, fire or electric shock: • Do not share the same power outlet with other equipment. • Do not operate with wet hands. • Do not over bend the power supply cord. • Do not operate or stop the unit by inserting or pulling out the power plug.
How to use i AUTO-X Sunlight sensor and remote control receiver To reach temperature quickly (Cooling only) i AUTO-X i AUTO-X POWERFUL • The unit controls set temperature according to room temperature to accelerate room cooling. Set i AUTO-X temperature Indicator (Green) Human activity sensor POWER TIMER -1°C Max = 4 hours • After max 4 hours, the set temperature is shifted according to activity detection. • Fan speed is fixed at AUTO, fan speed selection is prohibited.
See "To learn more..." for details. ECONAVI To optimise energy saving To set the timer 2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset times. NANOE-G To purify the air 1 NANOE-G • Can be activated even when the unit is turned off. In this condition, the unit will operate as a fan with AUTO fan speed and flap swing.
To learn more... Operation mode AUTO : During operation mode selection the POWER indicator blinks. • Unit selects operation mode every 10 minutes according to setting temperature and room temperature. HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation. COOL : Provides efficient comfort cooling to suit your needs. DRY : Unit operates at low fan speed to give a gentle cooling operation. FAN : To circulate air in the room.
The human activity sensor will also scan for area of heat source and movement in a room. Detection area • Based on area activeness horizontal airflow direction will adjust either fix at predetermined position or swing left/right periodically. • The human activity sensor performance is influenced by indoor unit location, movement speed, temperature range, etc. 120º 7m • The human activity sensor may: - mistakenly detect an object with heat source & movement similar to human, such as pets, etc.
Cleaning instructions To ensure optimal performance of the unit, cleaning has to be carried out at regular intervals. Dirty unit may cause malfunction and you may see nanoe-G indicator blinks or error code “H99”. Please consult authorised dealer. • Switch off the power supply and unplug before cleaning. • Do not touch the aluminium fin, sharp parts may cause injury. • Do not use benzine, thinner or scouring powder. • Use only soap ( pH 7) or neutral household detergent. • Do not use water hotter than 40 °C.
Troubleshooting The following symptoms do not indicate malfunction. Symptom Cause Indoor fan stops occasionally during automatic fan speed setting. Airflow continues even after operation has stopped. • Extraction of remaining heat from the indoor unit (maximum 30 seconds). Operation is delayed a few minutes after restarting. • The delay is a protection to the unit’s compressor. Outdoor unit emits water/steam. • Condensation or evaporation occurs on pipes. TIMER indicator is always on.
Information Information for Users on Collection and Disposal of Old Equipment and used Batteries [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol.