Operating Instructions

7
HRVATSKI
*Prvih15minutailidoksenedosegnepostavljenatemperatura.
• Senzorljudskeaktivnostipretražitićepodručjeupotrazi
zaizvoromtoplineipokretauprostoriji.
Pokazateljljudskeaktivnosti Izvortoplineipokreta
Nalijevojstraniprostorije
Nadesnojstraniprostorije
Usredištuilinavišemjesta
uprostoriji
• Uređajćeodreditinajaktivnijiizvortoplineipokretate
automatskiprilagoditižaluzinuzavodoravanprotokzraka
napredodređenipoložajilijepokretatilijevo/desno.
Prostordetekcije(pogledodozgo)

• Kododabiraručnogupravljanjažaluzinom(AIRSWING)
◄►funkcijeECONAVIiAUTOCOMFORTbitćeponištene.
• Senzorljudskeaktivnostimoždanećedetektirati
predmeteupokretukojisenalazenaudaljenostivećojod
7miliizvankutadetekcije.
• Nasenzorljudskeaktivnostiutječusmještajunutarnje
jedinice,brzinapokreta,raspontemperature,itd.
• Senzorljudskeaktivnostimogaobi:
– Zabunomprepoznatipredmetsizvoromtoplinei
pokretasličnomljudskome,npr.kućnogljubimca,kao
ljudskobiće.
– Zabunomneuspjetiprepoznatiosobukaoizvortoplinei
pokretaakoonaostanenepomičnaduljevrijeme.
• TijekomizvršavanjafunkcijeECONAVI,senzorsunčeve
svjetlostiprepoznajeintenzitetsunčevesvjetlostikoja
prodirekrozprozoreirazlikujesunčanoioblačnovrijeme/
noćdabiseprilagodilatemperaturaitakododatno
optimiziralauštedaenergije.
ECONAVIseaktiviradokjeoblačno/noć.
ECONAVIseaktiviradokjesunčano.
• Usobibezprozorailisneprozirnimzastorom,senzor
suncaprocijenitićedajeoblačno/noć.
-1°C
-1°C
+1°C
Uvjetiuokolini
NačinradaCOOL/DRY
(hlađenje/sušenje)
Postavitetemperaturu
NačinradaHEAT
(GRIJANJE)
Postavitetemperaturu
Oblačno/
Noć
Oblačno/
Noć
Sunčano Sunčano
• Odstranjuje/neutraliziraštetnemikroorganizmepoput
virusa,bakterija,itd.
• Možeseaktiviratičakikadaseuređajisključi.Uovim
uvjetimanijemogućeprilagoditibrzinuventilatorai
žaluzine
• nanoe-Gautomatskiseaktivirakadjeuređajuključen
s .
Jednostruki podijeljeni sustav:
• Ovomradnjomumanjujesesuhoćazraka,čimese
povećavaudobnostvašeokolineprilikomhlađenja(način
radaCOOL)..
• Kadjevertikalansmjerprotokazrakapostavljenna
AUTO,zaustavitćesenanižojpozicijidabiseizbjegao
kontaktshladnimzrakom.Međutim,možeteručno
prilagoditismjeržaluzine.
Višestruki podijeljeni sustav:
• Funkcijanijeprimjenjiva.
SNAŽNO
TIHO
SNAŽNO
ZA BRZO DOSEZANJE
TEMPERATURE
• Jednostrukipodijeljenisustav:Radnjase
automatskizaustavljanakon20minuta.
• Višestrukipodijeljenisustav:Ponovno
pritisnitegumbiisključite(OFF)da
bistezaustaviliradnju.
TIHO
UŽIVANJE U TIHOM
RADU
• Radnjaublažavazvukstrujanjazraka.
• Kadsepokrenebilokojaradnja,uređajćejupočeti
izvršavatizaotprilike1minutu.Pokazateljljudske
aktivnostiserijskitreperi.
• Nakonpočetka,senzorljudskeaktivnostipočetće
detektiratirazinuizvoratopllineipokreta,uređaj
prilagođavatemperaturuistrujanjezrakakakobise
održalarazinaugode.
DA BISTE PROČISTILI ZRAK
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
6
DA BISTE POBOLJŠALI RAZINU VLAŽNOSTI 7
DA BISTE SE PREBACIVALI IZMEĐU SNAŽNOG
I TIHOG
8
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
PRAĆENJE LJUDSKE PRISUTNOSTI I
AKTIVNOSTI, TE SUNCA ZA UŠTEDU
ENERGIJE I UDOBNOST
9

10
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
Dabisteoptimizirali
ušteduenergije
Dabistepostigli
najvećuudobnost
-1°C
+1°C
+2°C
-2°C
-2°C
+0.3°C
Izvortoplineipokreta
Postavitebrzinu
ventilatora
Postavitebrzinu
ventilatora
+1Dodirnite.
≤Srednje
Ventilator
+1.Dodirnite.
NačinradaCOOL/DRY
(hlađenje/sušenje)
Postavitetemperaturu
NačinradaHEAT(GRIJANJE)
Postavitetemperaturu
Nisko Visoko Normalno Bez
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
ENGLISH
7
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
8
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
PO
WERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air ow noises.
9 10
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air ow to keep you comfort
consistently.
+1 tap*
-1°C
+1°C
+1 tap
Heat Source & Movement
Set Fan Speed
COOL/DRY Mode
Set Temperature
≤ Medium
Fan
+2°C
Low High Normal None
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air ow
direction louver either  x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.