Operating Instructions

8
CARE & CLEANING CARE & CLEANING
WASHING INSTRUCTIONS
WASHING INSTRUCTIONS
Do not use benzene, thinner or scouring powder.
Use only soap (
pH7) or neutral household detergent.
Do not use water hotter than 40°C.
HINTS
HINTS
• Clean the lter regularly for best performance and to
reduce power consumption.
Please consult your nearest dealer for seasonal
inspection.
FOR SEASONAL INSPECTION AFTER EXTENDED
FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE
NON-USE
Checking of remote control batteries.
No obstruction at air inlet and air outlet vents.
After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and air
outlet vents:
Cooling: 8°C Heating: 14°C
NON SERVICEABLE CRITERIAS
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then CALL Authorized
Distributor under the following conditions:
Abnormal noise during operation.
Water/foreign particles have entered the remote control.
Water leaks from Indoor unit.
Circuit breaker switches off frequently.
Power cord becomes unnaturally warm.
Switches or buttons are not functioning properly.
FOR EXTENDED NON-USE
FOR EXTENDED NON-USE
Activate Heat mode for 2~3 hours to remove moisture left in
the internal parts thoroughly.
Turn off the power supply.
Remove the remote control batteries.
Clean with dry cotton bud.
Active e-ion generator
cleaning is recommended
every 6 months.
Wipe the unit gently with a soft,
dry cloth.
INDOOR UNIT
INDOOR UNIT
ALUMINIUM FIN
ALUMINIUM FIN
• Clean the lters regularly.
• Wash/rinse the lters gently with water
to avoid damage to the lter surface.
• Dry the lters thoroughly under
the shade, away from re or direct
sunlight.
Replace any damage lter.
e-ion FILTERS
e-ion FILTERS
ACTIVE e-ion GENERATOR
ACTIVE e-ion GENERATOR
ACTIVE e-ion POWER MODULE
ACTIVE e-ion POWER MODULE
FRONT PANEL
FRONT PANEL
Raise and pull to remove. Wash
gently and dry.
Remove
Remove
CAUTION
Switch off the power supply before cleaning.
Do not touch the aluminium n, sharp parts may cause injury.