Operating Instructions
22
Connection Guide
Step 1
Step 2
Step 3
Connect with WPS mode
Connect with AP mode
The router supports WPS.
The router does not supports WPS.
Cancel
ŚŽŽƐĞƚŚĞďƵƩŽŶƚŚĂƚŵĂƚĐŚĞƐƚŚĞƐƚĂƚƵƐŽĨ
Wireless LAN LED.
ΎtŝƌĞůĞƐƐ>E>͛ƐƉŽƐŝƟŽŶĂŶĚĐŽůŽƵƌǀĂƌŝĞƐ
ĨŽƌĚŝīĞƌĞŶƚŵŽĚĞůƐ
.
Connection Guide
Step 1
Step 2
Step 3
LED is OFF
LED is ON
LED is Blinking
Cancel
Make sure smartphone is connected to same
wireless network.
When Wireless LAN LED is ON, tap “Next”.
1. Point the remote control to air
-
and press the “Wireless LAN” buƩon once.
2. When Wireless LAN LED is blinking, tap “Next”.
Connection Guide
Cancel
Next
Step 1
Step 2
Step 3Step 1
Step 2
Step 3
condiƟoner
Wireless LAN
LED
SET
CANCEL
Wireless
LAN buƩon
Wireless LAN
buƩon
A készülék használata
A hálózati kapcsolat beállítása
Ügyeljen arra, hogy a Vezeték nélküli
LAN LED-je ON (BE) állásban legyen,
irányítsa a távvezérlőt a légkondicionáló
készülékre és nyomja meg a Vezeték
nélküli LAN
23
English
Connection network using WPS mode (method 1)
1
Press the “WPS” button from the
router that will be connected to an air
conditioner.
• Check the status of Wireless LAN LED
on the remote control. If the Wireless
LAN LED is OFF, press the Wireless
LAN
button to enable the Wireless
LAN connection.
WƌĞƐƐƚŚĞ͞tW^͟ďƵƩŽŶŽŶƚŚĞƌŽƵƚĞƌƚŽĞƐƚĂďůŝƐŚ
ĐŽŶŶĞĐƟŽŶ͘
dĂƉ͞EĞdžƚ͟ĂŌĞƌƚŚĞƌŽƵƚĞƌŝƐƌĞĂĚLJĨŽƌĐŽŶŶĞĐƟŽŶ
Connection Guide
Step 1
Step 2
Step 3
Next
Cancel
2
Ensure Wireless LAN LED is ON. Press
and hold the Wireless LAN
button
for 5 seconds until “1” is shown on the
remote control and press
SET
pointing
to the air conditioner.
If Wireless LAN LED is OFF during the connecƟon
setup, please press “Wireless LAN” buƩon once
to enable the Wireless LAN before proceeding to
step 1 .
1. Press and hold “Wireless LAN” buƩon for 5 secs
unƟl easy seƫng “ 1 ” is shown .
2. Point remote control to air-condiƟoner and
press “SET” buƩon once.
3. AŌer step 1 & 2 have been done, tap “Next”.
Connection Guide
Step 1
Step 2
Step 3
Cancel
Next
SET
CANCEL
4
If the Wireless LAN LED keep blinking,
check the wireless router connection.
Searching for air-condiƟoner.
Please wait…
Connection Guide
Step 1
Step 2
Step 3
Cancel
3
When the connection of air conditioner
to router is successful, the Wireless LAN
LED changed from blinking to ON.
Connection Guide
Step 1
Step 2
Step 3
When the connecƟon of air-condiƟoner to router
is successful, the Wireless LAN LED changes from
blinking to ON.
*It may take up to few minutes before changes
to ON.
Next
If the Wireless LAN LED is ON, tap “Next”.
If Wireless LAN LED keep blinking, tap “Check”
Cancel
Check
ΎtŝƌĞůĞƐƐ>E>͛ƐƉŽƐŝƟŽŶĂŶĚĐŽůŽƵƌǀĂƌŝĞƐ
ĨŽƌĚŝīĞƌĞŶƚŵŽĚĞůƐ
How to use
gombot, amíg a Vezeték
nélküli LAN LED átvált villogásra.
Amikor a Vezeték nélküli LAN LED
villog, válassza ki a kívánt kapcsolódási
beállítás módot.
Válassza ki a kívánt router támogatás
csatlakozási módot.
1 2
3