Operating Instructions

29
Menu
User list
Owner
Change password
Replace device
Change router settings
Device list
Group list
Application settings
User’s manual
Terms of use
Copyright
Logout
My Home
User list
Living Room
Note Edit Allow
control
Delete
User A
User B
User C
User D
User E
User F
User G
tĂŝƟŶŐĨŽƌĂƉƉƌŽǀĂů
tĂŝƟŶŐĨŽƌĂƉƉƌŽǀĂů
My Home
Living Room
ŝƌͲĐŽŶĚŝƟŽŶĞƌŵŽĚĞů
CS-HZ25UKE
ZĞƉůĂĐĞƚŚĞŝŶĚŽŽƌWŽƌǁŝƌĞůĞƐƐŵŽĚƵůĞ
ϭ͘ŽŶŶĞĐƚƚŚĞĂŝƌͲĐŽŶĚŝƟŽŶĞƌƚŽƚŚĞƐĞƌǀĞƌǀŝĂ
ǁŝƌĞůĞƐƐƌŽƵƚĞƌ͘
Ϯ͘ZĞŐŝƐƚĞƌƚŚĞĂŝƌͲĐŽŶĚŝƟŽŶĞƌƚŽƚŚĞƐĞƌǀĞƌ
ǁŝƚŚƐŵĂƌƚƉŚŽŶĞ͘
Ύ<ŝŶĚůLJƌĞĚŽǁĞĞŬůLJƟŵĞƌƐĞƫŶŐĂŌĞƌƌĞƉůĂĐĞŵĞŶƚ
ŽĨǁŝƌĞůĞƐƐŵŽĚƵůĞ͘
Replace device
Cancel Start
My Home
Living Room
ŝƌͲĐŽŶĚŝƟŽŶĞƌŵŽĚĞů
CS-HZ25UKE
^ĞƚƵƉƚŚĞǁŝƌĞůĞƐƐŶĞƚǁŽƌŬĂŐĂŝŶǁŚĞŶLJŽƵ
ƌĞƉůĂĐĞĚƚŚĞǁŝƌĞůĞƐƐƌŽƵƚĞƌŽƌĐŚĂŶŐĞĚƚŚĞ
ƉĂƐƐǁŽƌĚ͘
zŽƵǁŝůůŚĂǀĞƚŽƐĞƚƵƉĞĂĐŚĚĞǀŝĐĞŝĨƚǁŽŽƌ
ŵŽƌĞĂŝƌĐŽŶĚŝƟŽŶĞƌƐĂƌĞĐŽŶŶĞĐƚĞĚƚŽƚŚĞ
ƐĂŵĞƌŽƵƚĞƌ͘
Change router settings
Cancel Start
Egyebek
A router cseréje.
Az okostelefon
modelljének
módosítása.
A beltéri egység vezérlő
táblájának módosítása.
A beltéri egység Hálózati
Adapter/Vezeték
nélküli LAN moduljának
módosítása
A légkondicionáló
készülék szállítása és
ártalmatlanítása
A „Panasonic Comfort Cloud” alkalmazásból válassza ki a
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
lehetőséget.
Válassza az „Owner” (Tulajdonos) lehetőséget és válassza a „Change router
settings” (Router beállítások módosítása) opciót.
Módosítsa a vezérlő táblát, majd azután használja a „Panasonic Comfort Cloud”
alkalmazást a
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
kiválasztásához. Válassza az „Owner” (Tulajdonos)
lehetőséget és válassza a „Replacedevice” (Eszköz cseréje) opciót. Ezt a
hivatalos márkaszerviznek kell elvégeznie.
Állítsa a légkondicionáló készüléket vissza a gyári
alapértelmezett értékekre.
Ellenőrizze az okostelefon kompatibilitását. Telepítse a „Panasonic
Comfort Cloud” alkalmazást, és jelentkezzen be a Panasonic
bejelentkezési Azonosítójával és jelszavával. Fejezze be a kezdeti
csatlakozás beállításával.
Módosítsa a Hálózati Adapter/Vezeték nélküli LAN modult, majd használja a
„Panasonic Comfort Cloud” alkalmazást a
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
lehetőség kiválasztásához.
Válassza az „Owner” (Tulajdonos) lehetőséget és a „Change router settings”
(Router beállítások módosítása) opciót. Ezt a hivatalos márkaszerviznek kell
elvégeznie.
Magyar
Hálózati Adapter - Kérdések és Válaszok
Ellenőrizze a beltéri egység Vezeték nélküli LAN LED-jét, hogy ON (BE)
állapotban van/villog és nyomja meg a Vezeték nélküli LAN
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
gombot 5
másodpercig. (Az „1” kijelzésre kerül)
A légkondicionáló készülék a „Panasonic Comfort Cloud” alkalmazásból
való törléséhez válassza ki a Menu (Menü), majd a „Device list“
(Eszközlista) lehetőséget a beállított egység törléséhez.
Nyomja addig a
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
gombot, amíg megjelenik a „5” jelzés.
Nyomja meg a
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
gombot 3 másodpercig, és a működés leáll.
A Vezeték nélküli LAN LED kialszik. (Gyári alapértelmezett
értékek visszaállítása megtörtént.)
•
•
•
•
Főmenü Felhasználói lista Eszköz cseréje
Router beállítások
módosítása