Operating Instructions

28
Vprašanja in odgovori omrežnega adapterja
Začetne nastavitve
Brezžična povezava
Aplikacije Panasonic
Comfort Cloud ni
mogoče namestiti na
pametni telefon.
Preverite kompatibilnost OS na pametnem telefonu.
Preverite, če LAN signal usmerjevalnika dosega klimatsko
napravo, če SSID ni skrit, če je MAC naslov za napravo
omogočen, če je signal dvojnega pasu usmerjevalnika omogočen
za 2,4 Ghz povezavo.Obstaja verjetnost, da uporabljate pametni
telefon ali brezžični usmerjevalnik, ki ne podprt oz. čigar metoda
povezovanja je drugačna. Obrnite se na navodila za namestitev
pametnega telefona in usmerjevalnika.
Ni zagotovila, da bo aplikacija delovala na vseh različicah
Android OS.
Za nastavitev dodatne naprave sledite navodilom prve naprave.
Priporočljivo je imenovati registrirane klimatske naprave, saj jih
boste tako lažje ločili med sabo.
Prenesite si aplikacijo Panasonic Comfot Cloud in ustvarite nov
Panasonic ID.
Sledite začetnim nastavitvam. Po registraciji klimatske naprave
vnesite prednastavljeno geslo naprave (ki ga je vnesel prvi
uporabnik).
Za dokončanje registracije je potrebna potrditev administratorja
(prvega uporabnika).
Obstaja verjetnost nestabilnega omrežja. Preverite moč signala:
Preverite, če je klimatska naprava ustavljena, nato pritisnite tipko za
brezžični LAN
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
za 5 sekund. (prikaže se »1«)
Pritisnite tipko
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
, dokler se ne prikaže »4«.
Pritisnite tipko
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
, delovanje se bo ustavilo.
Močan: Utrip 3-krat z intervalom
Srednji: Utrip 2-krat z intervalom
Šibek: Utrip enkrat z intervalom
Brez signala: IZKLOPLJENO
Po 5 sekundah se moč signala prikaže na LAN LED notranje
naprave.
Po 10 minutah se bo samodejno ustavilo. Za takojšnjo ustavitev
pritisnite tipko brezžičnega LAN
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
Ponastavite klimatsko napravo na privzete tovarniške nastavitve v skadu
z metodo poglavja »Prenos ali odlaganje klimatske naprave« na naslednji
strani. Zaključite z namestitvijo prve povezave.
Za potrditev administratorja izberite
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
.
Izberite »Owner« in »User List«, s čimer potrdite dodatnega
uporabnika.
Klimatske naprave ni
mogoče povezati z
usmerjevalnikom.
Registrirajte dodatne
klimatske naprave v
aplikaciji Panasonic
Comfort Cloud
Registrirajte
dodatnega
uporabnika, ki bo
lahko usmerjal
omrežni adapter
Brezžični signal se
izklaplja oz. prihaja
do motenj.
Sumljiv
nepooblaščen
dostop do naprave.
•
•
•
•
•
•