Operating Instructions

29
Menu
User list
Owner
Change password
Replace device
Change router settings
Device list
Group list
Application settings
User’s manual
Terms of use
Copyright
Logout
My Home
User list
Living Room
Note Edit Allow
control
Delete
User A
User B
User C
User D
User E
User F
User G
tĂŝƟŶŐĨŽƌĂƉƉƌŽǀĂů
tĂŝƟŶŐĨŽƌĂƉƉƌŽǀĂů
My Home
Living Room
ŝƌͲĐŽŶĚŝƟŽŶĞƌŵŽĚĞů
CS-HZ25UKE
ZĞƉůĂĐĞƚŚĞŝŶĚŽŽƌWŽƌǁŝƌĞůĞƐƐŵŽĚƵůĞ
ϭŽŶŶĞĐƚƚŚĞĂŝƌͲĐŽŶĚŝƟŽŶĞƌƚŽƚŚĞƐĞƌǀĞƌǀŝĂ
ǁŝƌĞůĞƐƐƌŽƵƚĞƌ
ϮZĞŐŝƐƚĞƌƚŚĞĂŝƌͲĐŽŶĚŝƟŽŶĞƌƚŽƚŚĞƐĞƌǀĞƌ
ǁŝƚŚƐŵĂƌƚƉŚŽŶĞ
Ύ<ŝŶĚůLJƌĞĚŽǁĞĞŬůLJƟŵĞƌƐĞƫŶŐĂŌĞƌƌĞƉůĂĐĞŵĞŶƚ
ŽĨǁŝƌĞůĞƐƐŵŽĚƵůĞ
Replace device
Cancel Start
My Home
Living Room
ŝƌͲĐŽŶĚŝƟŽŶĞƌŵŽĚĞů
CS-HZ25UKE
^ĞƚƵƉƚŚĞǁŝƌĞůĞƐƐŶĞƚǁŽƌŬĂŐĂŝŶǁŚĞŶLJŽƵ
ƌĞƉůĂĐĞĚƚŚĞǁŝƌĞůĞƐƐƌŽƵƚĞƌŽƌĐŚĂŶŐĞĚƚŚĞ
ƉĂƐƐǁŽƌĚ
zŽƵǁŝůůŚĂǀĞƚŽƐĞƚƵƉĞĂĐŚĚĞǀŝĐĞŝĨƚǁŽŽƌ
ŵŽƌĞĂŝƌĐŽŶĚŝƟŽŶĞƌƐĂƌĞĐŽŶŶĞĐƚĞĚƚŽƚŚĞ
ƐĂŵĞƌŽƵƚĞƌ
Change router settings
Cancel Start
Drugo
Zamenjava
usmerjevalnika.
Sprememba modela
pametnega telefona.
Spremenite
nadzorno ploščo
notranje naprave.
Sprememba
omrežnega adapterja/
brezžičnega LAN
modula notranje
naprave
Prenos ali odlaganje
klimatske naprave
V aplikaciji Panasonic Comfort Cloud izberite
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
.
Izberite »Owner« in »Change router settings«.
Spremenite nadzorno ploščo, nato v aplikaciji Panasonic
Comfort Cloud izberite
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
. Izberite »Owner« in »Replace
device«. To naj opravi pooblaščeni serviser.
Ponastavite klimatsko napravo na privzete tovarniške nastavitve.
Preverite kompatibilnost pametnega telefona. Namestite
aplikacijo Panasonic Comfort Cloud in se povežite z vašim
Panasonic ID in geslom. Zaključite z namestitvijo prve
povezave.
Spremenite omrežni adapter/brezžični LAN modul, nato v
aplikaciji Panasonic Comfort Cloud izberite
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
. Izberite
»Owner« in »Change router settings«. To naj opravi pooblaščeni
serviser.
Slovensko
Vprašanja in odgovori za omrežni adapter
Preverite, če LAN LED lučka na notranji napravi utripa oz. sveti, nato
pritisnite tipko za brezžični LAN
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
za 5 sekund. (prikaže se »1«)
Za odstranitev klimatske naprave iz aplikacije Panasonic Comfort Cloud,
izberite Meni in »Device list«, nato izbrišite napravo.
Pritisnite tipko
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
, dokler se ne prikaže »5«.
Pritisnite tipko
28
Initial setting
“Panasonic Comfort
Cloud” app cannot
be installed in
smartphone.
Check if OS of the smartphone is compatible.
The APP is not guaranteed to work with all versions of Android
OS.
Air conditioner and
router cannot be
connected.
Ensure the router’s LAN signal reaches the unit, the SSID is
not hidden, the MAC address setup is enabled for the unit, the
router’s dual band signal is enabled for 2.4GHz connection.
There is a possibility that you are using a smartphone or wireless
router that is not supported or connection method is different.
Refer to the smartphone and router installation manual for detail.
Register additional
air conditioner to
“Panasonic Comfort
Cloud” app.
Set the additional unit setting follow to the  rst unit initial setup.
It is recommended to name each of the registered air conditioner
units for easy to distinguish.
Register additional
user to control the
Network Adaptor.
Download “Panasonic Comfort Cloud” app and create new
Panasonic ID.
Follow initial setting. Once the air conditioner is registered, input
the preset device password (set by  rst user).
Approval from administrator ( rst user) is required to complete the
registration.
For administrator approval, select the
Menu
.
Choose “Owner” and select “User List” to approve additional user.
Wireless connection
Wireless signal is
disconnected or
interrupted.
There is a possibility of connection network is not stable. Check
the signal strength by:-
• Con rm the air conditioner operation is stopped and press the
Wireless LAN
button for 5 seconds.
(“1” is displayed)
• Press the
button until “4” is displayed.
• Press the
SET
button and operation stops.
• After 5 seconds, the signal strength is shown on the indoor unit
Wireless LAN LED.
Strong: Blink 3 times with an interval
Moderate: Blink 2 times with an interval
Weak: Blink once with an interval
No signal: OFF
• It will stop automatically after 10 minutes. To stop immediately,
press the Wireless LAN
button.
Suspicious
unauthorized access
to the unit.
• Reset the air conditioner unit to manufacturing default condition
by referring to “To transfer or dispose the air conditioner” method
at next page. Complete by initial connection setup.
Network Adaptor Q & A
za 3 sekunde, delovanje se bo ustavilo.
LAN LED lučka se bo izklopila. (tovarniška ponastavitev je zaključena)
•
•
•
•
Glavni meni Seznam uporabnikov Zamenjajte napravo
Spremenite nastavitve
usmerjevalnika